From: James Smart <jsmart2021@gmail.com>
To: linux-scsi@vger.kernel.org
Cc: James Smart <jsmart2021@gmail.com>,
Dick Kennedy <dick.kennedy@broadcom.com>
Subject: [PATCH 11/42] lpfc: Fix Oops in nvme_register with target logout/login
Date: Wed, 14 Aug 2019 16:56:41 -0700 [thread overview]
Message-ID: <20190814235712.4487-12-jsmart2021@gmail.com> (raw)
In-Reply-To: <20190814235712.4487-1-jsmart2021@gmail.com>
lpfc_nvme_register_port hit a null prev_ndlp pointer in a test
with lots of target ports swapping addresses. The oldport value
was stale, thus it's ndlp (prev_ndlp set to it) was used.
Fix by moving oldrport pointer checks, and if used prev_ndlp pointer
assignment, to be done while the lock is held.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
---
drivers/scsi/lpfc/lpfc_nvme.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c
index 946642cee3df..9746808cf94f 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -2317,9 +2317,13 @@ lpfc_nvme_register_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
spin_lock_irq(&vport->phba->hbalock);
oldrport = lpfc_ndlp_get_nrport(ndlp);
- spin_unlock_irq(&vport->phba->hbalock);
- if (!oldrport)
+ if (oldrport) {
+ prev_ndlp = oldrport->ndlp;
+ spin_unlock_irq(&vport->phba->hbalock);
+ } else {
+ spin_unlock_irq(&vport->phba->hbalock);
lpfc_nlp_get(ndlp);
+ }
ret = nvme_fc_register_remoteport(localport, &rpinfo, &remote_port);
if (!ret) {
@@ -2338,7 +2342,6 @@ lpfc_nvme_register_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
/* New remoteport record does not guarantee valid
* host private memory area.
*/
- prev_ndlp = oldrport->ndlp;
if (oldrport == remote_port->private) {
/* Same remoteport - ndlp should match.
* Just reuse.
@@ -2352,7 +2355,7 @@ lpfc_nvme_register_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
remote_port->port_name,
remote_port->port_id,
remote_port->port_role,
- prev_ndlp,
+ oldrport->ndlp,
ndlp,
ndlp->nlp_type,
ndlp->nlp_DID);
--
2.13.7
next prev parent reply other threads:[~2019-08-14 23:57 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-14 23:56 [PATCH 00/42] lpfc: Update lpfc to revision 12.4.0.0 James Smart
2019-08-14 23:56 ` [PATCH 01/42] lpfc: Limit xri count for kdump environment James Smart
2019-08-14 23:56 ` [PATCH 02/42] lpfc: Fix PLOGI failure with high remoteport count James Smart
2019-08-14 23:56 ` [PATCH 03/42] lpfc: Fix ELS field alignments James Smart
2019-08-14 23:56 ` [PATCH 04/42] lpfc: Fix crash on driver unload in wq free James Smart
2019-08-14 23:56 ` [PATCH 05/42] lpfc: Fix failure to clear non-zero eq_delay after io rate reduction James Smart
2019-08-14 23:56 ` [PATCH 06/42] lpfc: Fix leak of ELS completions on adapter reset James Smart
2019-08-14 23:56 ` [PATCH 07/42] lpfc: Fix port relogin failure due to GID_FT interaction James Smart
2019-08-14 23:56 ` [PATCH 08/42] lpfc: Fix discovery when target has no GID_FT information James Smart
2019-08-14 23:56 ` [PATCH 09/42] lpfc: Fix ADISC reception terminating login state if a NVME target James Smart
2019-08-14 23:56 ` [PATCH 10/42] lpfc: Fix issuing init_vpi mbox on SLI-3 card James Smart
2019-08-14 23:56 ` James Smart [this message]
2019-08-14 23:56 ` [PATCH 12/42] lpfc: Fix irq raising in lpfc_sli_hba_down James Smart
2019-08-14 23:56 ` [PATCH 13/42] lpfc: Fix oops when fewer hdwqs than cpus James Smart
2019-08-14 23:56 ` [PATCH 14/42] lpfc: Fix FLOGI handling across multiple link up/down conditions James Smart
2019-08-14 23:56 ` [PATCH 15/42] lpfc: Fix null ptr oops updating lpfc_devloss_tmo via sysfs attribute James Smart
2019-08-14 23:56 ` [PATCH 16/42] lpfc: Fix devices that don't return after devloss followed by rediscovery James Smart
2019-08-14 23:56 ` [PATCH 17/42] lpfc: Fix loss of remote port after devloss due to lack of RPIs James Smart
2019-08-14 23:56 ` [PATCH 18/42] lpfc: Fix propagation of devloss_tmo setting to nvme transport James Smart
2019-08-14 23:56 ` [PATCH 19/42] lpfc: Fix sg_seg_cnt for HBAs that don't support NVME James Smart
2019-08-14 23:56 ` [PATCH 20/42] lpfc: Fix driver nvme rescan logging James Smart
2019-08-14 23:56 ` [PATCH 21/42] lpfc: Fix error in remote port address change James Smart
2019-08-14 23:56 ` [PATCH 22/42] lpfc: Fix deadlock on host_lock during cable pulls James Smart
2019-08-14 23:56 ` [PATCH 23/42] lpfc: Fix crash due to port reset racing vs adapter error handling James Smart
2019-08-14 23:56 ` [PATCH 24/42] lpfc: Fix too many sg segments spamming in kernel log James Smart
2019-08-14 23:56 ` [PATCH 25/42] lpfc: Fix hang when downloading fw on port enabled for nvme James Smart
2019-08-14 23:56 ` [PATCH 26/42] lpfc: Fix nvme target mode ABTSing a received ABTS James Smart
2019-08-14 23:56 ` [PATCH 27/42] lpfc: Fix nvme sg_seg_cnt display if HBA does not support NVME James Smart
2019-08-14 23:56 ` [PATCH 28/42] lpfc: Fix sli4 adapter initialization with MSI James Smart
2019-08-14 23:56 ` [PATCH 29/42] lpfc: Fix upcall to bsg done in non-success cases James Smart
2019-08-14 23:57 ` [PATCH 30/42] lpfc: Fix Max Frame Size value shown in fdmishow output James Smart
2019-08-14 23:57 ` [PATCH 31/42] lpfc: Fix reported physical link speed on a disabled trunked link James Smart
2019-08-14 23:57 ` [PATCH 32/42] lpfc: Fix BlockGuard enablement on FCoE adapters James Smart
2019-08-14 23:57 ` [PATCH 33/42] lpfc: Fix nvme first burst module parameter description James Smart
2019-08-14 23:57 ` [PATCH 34/42] lpfc: Fix coverity warnings James Smart
2019-08-14 23:57 ` [PATCH 35/42] lpfc: Add simple unlikely optimizations to reduce NVME latency James Smart
2019-08-14 23:57 ` [PATCH 36/42] lpfc: Migrate to %px and %pf in kernel print calls James Smart
2019-08-14 23:57 ` [PATCH 37/42] lpfc: Add first and second level hardware revisions to sysfs reporting James Smart
2019-08-14 23:57 ` [PATCH 38/42] lpfc: Add MDS driver loopback diagnostics support James Smart
2019-08-14 23:57 ` [PATCH 39/42] lpfc: Support dynamic unbounded SGL lists on G7 hardware James Smart
2019-08-14 23:57 ` [PATCH 40/42] lpfc: Add NVMe sequence level error recovery support James Smart
2019-08-14 23:57 ` [PATCH 41/42] lpfc: Merge per-protocol WQ/CQ pairs into single per-cpu pair James Smart
2019-08-14 23:57 ` [PATCH 42/42] lpfc: Update lpfc version to 12.4.0.0 James Smart
2019-08-20 3:06 ` [PATCH 00/42] lpfc: Update lpfc to revision 12.4.0.0 Martin K. Petersen
2019-08-27 13:31 ` Hannes Reinecke
2019-08-28 0:10 ` James Smart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190814235712.4487-12-jsmart2021@gmail.com \
--to=jsmart2021@gmail.com \
--cc=dick.kennedy@broadcom.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).