From: James Smart <jsmart2021@gmail.com>
To: linux-scsi@vger.kernel.org
Cc: James Smart <jsmart2021@gmail.com>,
Dick Kennedy <dick.kennedy@broadcom.com>
Subject: [PATCH 29/42] lpfc: Fix upcall to bsg done in non-success cases
Date: Wed, 14 Aug 2019 16:56:59 -0700 [thread overview]
Message-ID: <20190814235712.4487-30-jsmart2021@gmail.com> (raw)
In-Reply-To: <20190814235712.4487-1-jsmart2021@gmail.com>
The scsi transport fc bsg interface does not expect the
bsg_job_done() callback to be done if the bsg request call
returns failure. Several of the HST_VENDOR cases in the driver
unconditionally call bsg_job_done() regardless of the returning
value.
Fix the code to only call bsg_job_done() if the call to
lpfc_bsg_request() will return success.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
---
drivers/scsi/lpfc/lpfc_bsg.c | 22 +++++++++++++++-------
1 file changed, 15 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index c7f66239ca70..9b9858078076 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -5449,7 +5449,9 @@ lpfc_bsg_get_ras_config(struct bsg_job *job)
bsg_reply->result = rc;
/* complete the job back to userspace */
- bsg_job_done(job, bsg_reply->result, bsg_reply->reply_payload_rcv_len);
+ if (!rc)
+ bsg_job_done(job, bsg_reply->result,
+ bsg_reply->reply_payload_rcv_len);
return rc;
}
@@ -5528,8 +5530,9 @@ lpfc_bsg_set_ras_config(struct bsg_job *job)
bsg_reply->result = rc;
/* complete the job back to userspace */
- bsg_job_done(job, bsg_reply->result,
- bsg_reply->reply_payload_rcv_len);
+ if (!rc)
+ bsg_job_done(job, bsg_reply->result,
+ bsg_reply->reply_payload_rcv_len);
return rc;
}
@@ -5589,7 +5592,9 @@ lpfc_bsg_get_ras_lwpd(struct bsg_job *job)
bsg_reply->result = rc;
/* complete the job back to userspace */
- bsg_job_done(job, bsg_reply->result, bsg_reply->reply_payload_rcv_len);
+ if (!rc)
+ bsg_job_done(job, bsg_reply->result,
+ bsg_reply->reply_payload_rcv_len);
return rc;
}
@@ -5671,7 +5676,9 @@ lpfc_bsg_get_ras_fwlog(struct bsg_job *job)
ras_job_error:
bsg_reply->result = rc;
- bsg_job_done(job, bsg_reply->result, bsg_reply->reply_payload_rcv_len);
+ if (!rc)
+ bsg_job_done(job, bsg_reply->result,
+ bsg_reply->reply_payload_rcv_len);
return rc;
}
@@ -5742,8 +5749,9 @@ lpfc_get_trunk_info(struct bsg_job *job)
phba->sli4_hba.link_state.logical_speed / 1000;
job_error:
bsg_reply->result = rc;
- bsg_job_done(job, bsg_reply->result,
- bsg_reply->reply_payload_rcv_len);
+ if (!rc)
+ bsg_job_done(job, bsg_reply->result,
+ bsg_reply->reply_payload_rcv_len);
return rc;
}
--
2.13.7
next prev parent reply other threads:[~2019-08-14 23:57 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-14 23:56 [PATCH 00/42] lpfc: Update lpfc to revision 12.4.0.0 James Smart
2019-08-14 23:56 ` [PATCH 01/42] lpfc: Limit xri count for kdump environment James Smart
2019-08-14 23:56 ` [PATCH 02/42] lpfc: Fix PLOGI failure with high remoteport count James Smart
2019-08-14 23:56 ` [PATCH 03/42] lpfc: Fix ELS field alignments James Smart
2019-08-14 23:56 ` [PATCH 04/42] lpfc: Fix crash on driver unload in wq free James Smart
2019-08-14 23:56 ` [PATCH 05/42] lpfc: Fix failure to clear non-zero eq_delay after io rate reduction James Smart
2019-08-14 23:56 ` [PATCH 06/42] lpfc: Fix leak of ELS completions on adapter reset James Smart
2019-08-14 23:56 ` [PATCH 07/42] lpfc: Fix port relogin failure due to GID_FT interaction James Smart
2019-08-14 23:56 ` [PATCH 08/42] lpfc: Fix discovery when target has no GID_FT information James Smart
2019-08-14 23:56 ` [PATCH 09/42] lpfc: Fix ADISC reception terminating login state if a NVME target James Smart
2019-08-14 23:56 ` [PATCH 10/42] lpfc: Fix issuing init_vpi mbox on SLI-3 card James Smart
2019-08-14 23:56 ` [PATCH 11/42] lpfc: Fix Oops in nvme_register with target logout/login James Smart
2019-08-14 23:56 ` [PATCH 12/42] lpfc: Fix irq raising in lpfc_sli_hba_down James Smart
2019-08-14 23:56 ` [PATCH 13/42] lpfc: Fix oops when fewer hdwqs than cpus James Smart
2019-08-14 23:56 ` [PATCH 14/42] lpfc: Fix FLOGI handling across multiple link up/down conditions James Smart
2019-08-14 23:56 ` [PATCH 15/42] lpfc: Fix null ptr oops updating lpfc_devloss_tmo via sysfs attribute James Smart
2019-08-14 23:56 ` [PATCH 16/42] lpfc: Fix devices that don't return after devloss followed by rediscovery James Smart
2019-08-14 23:56 ` [PATCH 17/42] lpfc: Fix loss of remote port after devloss due to lack of RPIs James Smart
2019-08-14 23:56 ` [PATCH 18/42] lpfc: Fix propagation of devloss_tmo setting to nvme transport James Smart
2019-08-14 23:56 ` [PATCH 19/42] lpfc: Fix sg_seg_cnt for HBAs that don't support NVME James Smart
2019-08-14 23:56 ` [PATCH 20/42] lpfc: Fix driver nvme rescan logging James Smart
2019-08-14 23:56 ` [PATCH 21/42] lpfc: Fix error in remote port address change James Smart
2019-08-14 23:56 ` [PATCH 22/42] lpfc: Fix deadlock on host_lock during cable pulls James Smart
2019-08-14 23:56 ` [PATCH 23/42] lpfc: Fix crash due to port reset racing vs adapter error handling James Smart
2019-08-14 23:56 ` [PATCH 24/42] lpfc: Fix too many sg segments spamming in kernel log James Smart
2019-08-14 23:56 ` [PATCH 25/42] lpfc: Fix hang when downloading fw on port enabled for nvme James Smart
2019-08-14 23:56 ` [PATCH 26/42] lpfc: Fix nvme target mode ABTSing a received ABTS James Smart
2019-08-14 23:56 ` [PATCH 27/42] lpfc: Fix nvme sg_seg_cnt display if HBA does not support NVME James Smart
2019-08-14 23:56 ` [PATCH 28/42] lpfc: Fix sli4 adapter initialization with MSI James Smart
2019-08-14 23:56 ` James Smart [this message]
2019-08-14 23:57 ` [PATCH 30/42] lpfc: Fix Max Frame Size value shown in fdmishow output James Smart
2019-08-14 23:57 ` [PATCH 31/42] lpfc: Fix reported physical link speed on a disabled trunked link James Smart
2019-08-14 23:57 ` [PATCH 32/42] lpfc: Fix BlockGuard enablement on FCoE adapters James Smart
2019-08-14 23:57 ` [PATCH 33/42] lpfc: Fix nvme first burst module parameter description James Smart
2019-08-14 23:57 ` [PATCH 34/42] lpfc: Fix coverity warnings James Smart
2019-08-14 23:57 ` [PATCH 35/42] lpfc: Add simple unlikely optimizations to reduce NVME latency James Smart
2019-08-14 23:57 ` [PATCH 36/42] lpfc: Migrate to %px and %pf in kernel print calls James Smart
2019-08-14 23:57 ` [PATCH 37/42] lpfc: Add first and second level hardware revisions to sysfs reporting James Smart
2019-08-14 23:57 ` [PATCH 38/42] lpfc: Add MDS driver loopback diagnostics support James Smart
2019-08-14 23:57 ` [PATCH 39/42] lpfc: Support dynamic unbounded SGL lists on G7 hardware James Smart
2019-08-14 23:57 ` [PATCH 40/42] lpfc: Add NVMe sequence level error recovery support James Smart
2019-08-14 23:57 ` [PATCH 41/42] lpfc: Merge per-protocol WQ/CQ pairs into single per-cpu pair James Smart
2019-08-14 23:57 ` [PATCH 42/42] lpfc: Update lpfc version to 12.4.0.0 James Smart
2019-08-20 3:06 ` [PATCH 00/42] lpfc: Update lpfc to revision 12.4.0.0 Martin K. Petersen
2019-08-27 13:31 ` Hannes Reinecke
2019-08-28 0:10 ` James Smart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190814235712.4487-30-jsmart2021@gmail.com \
--to=jsmart2021@gmail.com \
--cc=dick.kennedy@broadcom.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).