From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Marc Gonzalez <marc.w.gonzalez@free.fr>
Cc: SCSI <linux-scsi@vger.kernel.org>,
MSM <linux-arm-msm@vger.kernel.org>,
Avri Altman <avri.altman@wdc.com>,
Alim Akhtar <alim.akhtar@samsung.com>,
Lee Jones <lee.jones@linaro.org>,
Ard Biesheuvel <ard.biesheuvel@linaro.org>,
Evan Green <evgreen@chromium.org>,
Douglas Anderson <dianders@chromium.org>,
Vivek Gautam <vivek.gautam@codeaurora.org>,
Nikita Shvets <runetmember@gmail.com>,
Stanley Chu <stanley.chu@mediatek.com>
Subject: Re: ufshcd_abort: Device abort task at tag 7
Date: Wed, 28 Aug 2019 12:20:31 -0700 [thread overview]
Message-ID: <20190828192031.GN6167@minitux> (raw)
In-Reply-To: <9f3ed253-5f6b-1893-531d-085f881956dd@free.fr>
On Wed 28 Aug 02:09 PDT 2019, Marc Gonzalez wrote:
> Hello,
>
> Someone posted a bug report for UFS on an sdm850 tablet:
> https://bugzilla.kernel.org/show_bug.cgi?id=204685
>
> If I'm reading the boot logs right, this board is EFI rather than DT.
It's UEFI-based and Linux will either operate based on DT or ACPI
tables, depending on what was provided.
> (Lee: EFI on qcom is one of your areas, right?
> The UFSHC driver is DT-aware, but is it EFI-aware?)
>
> [ 0.000000] efi: memattr: Unexpected EFI Memory Attributes table version -1347440721
> I suppose this may be safely ignored?
>
> [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.2.0-99-generic root=UUID=66e85825-5c21-4120-b4ee-e17e4cdc1e58 ro efi=novamap ignore_loglevel clk_ignore_unused pd_ignore_unused console=tty0
> IIUC, the kernel is supposed to boot successfully even without
> "clk_ignore_unused pd_ignore_unused" (tangential, unrelated)
>
> Bjorn, any ideas? Ever see this issue?
>
I don't remember the exact splats seen, but I would suggest that this is
retested after applying the following series:
https://lore.kernel.org/linux-arm-msm/20190828191756.24312-1-bjorn.andersson@linaro.org/T/#u
Regards,
Bjorn
> Regards.
>
>
> Notable events:
>
> [ 2.438780] geni_se_qup 8c0000.geniqup: Err getting AHB clks -517
> [ 2.439030] geni_se_qup ac0000.geniqup: Err getting AHB clks -517
>
> [ 2.453050] ufshcd-qcom 1d84000.ufshc: ufshcd_get_vreg: vcc get failed, err=-517
> [ 2.458477] ufshcd-qcom 1d84000.ufshc: Initialization failed
>
> [ 2.540980] ufshcd-qcom 1d84000.ufshc: ufs_qcom_init: required phy device. hasn't probed yet. err = -517
> [ 2.540986] ufshcd-qcom 1d84000.ufshc: ufshcd_variant_hba_init: variant qcom init failed err -517
> [ 2.541052] ufshcd-qcom 1d84000.ufshc: Initialization failed
>
> [ 2.695052] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
> [ 2.699182] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
> [ 2.706287] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
> [ 2.866207] ufshcd-qcom 1d84000.ufshc: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
>
> [ 33.772190] ufshcd-qcom 1d84000.ufshc: ufshcd_abort: Device abort task at tag 7
> [ 33.774946] sd 0:0:0:5: [sdf] tag#7 CDB: Read(10) 28 00 00 00 00 00 00 00 01 00
> [ 33.805525] ufshcd-qcom 1d84000.ufshc: hba->ufs_version = 0x210, hba->capabilities = 0x1587031f
> [ 33.808338] ufshcd-qcom 1d84000.ufshc: hba->outstanding_reqs = 0xab000080, hba->outstanding_tasks = 0x0
>
> [ 34.045961] ufshcd-qcom 1d84000.ufshc: UPIU[7] - issue time 3165714 us
> [ 34.047069] ufshcd-qcom 1d84000.ufshc: UPIU[7] - complete time 0 us
> [ 34.048196] ufshcd-qcom 1d84000.ufshc: UPIU[7] - Transfer Request Descriptor phys@0x2661cd0e0
> [ 34.051799] ufshcd-qcom 1d84000.ufshc: UPIU[7] - Request UPIU phys@0xdf045400
> [ 34.055715] ufshcd-qcom 1d84000.ufshc: UPIU[7] - Response UPIU phys@0xdf045600
> [ 34.062761] ufshcd-qcom 1d84000.ufshc: UPIU[7] - PRDT - 1 entries phys@0xdf045800
> [ 34.065836] ufshcd-qcom 1d84000.ufshc: ufshcd_abort: cmd pending in the device. tag = 7
> [ 34.168171] ufshcd-qcom 1d84000.ufshc: __ufshcd_issue_tm_cmd: task management cmd 0x01 timed-out
> [ 34.169822] ufshcd-qcom 1d84000.ufshc: ufshcd_abort: failed with err -110
> [ 34.171497] ufshcd-qcom 1d84000.ufshc: ufshcd_abort: Device abort task at tag 29
> [ 34.174951] ufshcd-qcom 1d84000.ufshc: UPIU[29] - issue time 3036529 us
> [ 34.176740] ufshcd-qcom 1d84000.ufshc: UPIU[29] - complete time 0 us
> [ 34.178534] ufshcd-qcom 1d84000.ufshc: UPIU[29] - Transfer Request Descriptor phys@0x2661cd3a0
> [ 34.184172] ufshcd-qcom 1d84000.ufshc: UPIU[29] - Request UPIU phys@0xdf055c00
> [ 34.190105] ufshcd-qcom 1d84000.ufshc: UPIU[29] - Response UPIU phys@0xdf055e00
> [ 34.200535] ufshcd-qcom 1d84000.ufshc: UPIU[29] - PRDT - 1 entries phys@0xdf056000
> [ 34.202707] ufshcd-qcom 1d84000.ufshc: ufshcd_abort: failed with err -5
> [ 34.204910] ufshcd-qcom 1d84000.ufshc: ufshcd_abort: Device abort task at tag 25
> [ 34.209414] ufshcd-qcom 1d84000.ufshc: UPIU[25] - issue time 3017240 us
> [ 34.211722] ufshcd-qcom 1d84000.ufshc: UPIU[25] - complete time 0 us
> [ 34.214048] ufshcd-qcom 1d84000.ufshc: UPIU[25] - Transfer Request Descriptor phys@0x2661cd320
> [ 34.221259] ufshcd-qcom 1d84000.ufshc: UPIU[25] - Request UPIU phys@0xdf052c00
> [ 34.228788] ufshcd-qcom 1d84000.ufshc: UPIU[25] - Response UPIU phys@0xdf052e00
> [ 34.241869] ufshcd-qcom 1d84000.ufshc: UPIU[25] - PRDT - 1 entries phys@0xdf053000
> [ 34.244578] ufshcd-qcom 1d84000.ufshc: ufshcd_abort: failed with err -5
> [ 34.247307] ufshcd-qcom 1d84000.ufshc: ufshcd_abort: Device abort task at tag 24
> [ 34.252877] ufshcd-qcom 1d84000.ufshc: UPIU[24] - issue time 3018666 us
> [ 34.255718] ufshcd-qcom 1d84000.ufshc: UPIU[24] - complete time 0 us
> [ 34.258540] ufshcd-qcom 1d84000.ufshc: UPIU[24] - Transfer Request Descriptor phys@0x2661cd300
> [ 34.266987] ufshcd-qcom 1d84000.ufshc: UPIU[24] - Request UPIU phys@0xdf052000
> [ 34.275500] ufshcd-qcom 1d84000.ufshc: UPIU[24] - Response UPIU phys@0xdf052200
> [ 34.289559] ufshcd-qcom 1d84000.ufshc: UPIU[24] - PRDT - 1 entries phys@0xdf052400
> [ 34.292343] ufshcd-qcom 1d84000.ufshc: ufshcd_abort: failed with err -5
> [ 34.295114] ufshcd-qcom 1d84000.ufshc: ufshcd_abort: Device abort task at tag 27
> [ 34.300650] ufshcd-qcom 1d84000.ufshc: UPIU[27] - issue time 3040502 us
> [ 34.303419] ufshcd-qcom 1d84000.ufshc: UPIU[27] - complete time 0 us
> [ 34.306159] ufshcd-qcom 1d84000.ufshc: UPIU[27] - Transfer Request Descriptor phys@0x2661cd360
> [ 34.314450] ufshcd-qcom 1d84000.ufshc: UPIU[27] - Request UPIU phys@0xdf054400
> [ 34.322892] ufshcd-qcom 1d84000.ufshc: UPIU[27] - Response UPIU phys@0xdf054600
> [ 34.336707] ufshcd-qcom 1d84000.ufshc: UPIU[27] - PRDT - 1 entries phys@0xdf054800
> [ 34.339447] ufshcd-qcom 1d84000.ufshc: ufshcd_abort: failed with err -5
> [ 34.342173] ufshcd-qcom 1d84000.ufshc: ufshcd_abort: Device abort task at tag 31
> [ 34.347604] ufshcd-qcom 1d84000.ufshc: UPIU[31] - issue time 3036762 us
> [ 34.350345] ufshcd-qcom 1d84000.ufshc: UPIU[31] - complete time 0 us
> [ 34.353042] ufshcd-qcom 1d84000.ufshc: UPIU[31] - Transfer Request Descriptor phys@0x2661cd3e0
> [ 34.361194] ufshcd-qcom 1d84000.ufshc: UPIU[31] - Request UPIU phys@0xdf057400
> [ 34.369347] ufshcd-qcom 1d84000.ufshc: UPIU[31] - Response UPIU phys@0xdf057600
> [ 34.383041] ufshcd-qcom 1d84000.ufshc: UPIU[31] - PRDT - 1 entries phys@0xdf057800
> [ 34.385789] ufshcd-qcom 1d84000.ufshc: ufshcd_abort: failed with err -5
> [ 34.508188] ufshcd-qcom 1d84000.ufshc: __ufshcd_issue_tm_cmd: task management cmd 0x08 timed-out
> [ 34.511533] ufshcd-qcom 1d84000.ufshc: ufshcd_eh_device_reset_handler: failed with err -110
> [ 34.616170] ufshcd-qcom 1d84000.ufshc: __ufshcd_issue_tm_cmd: task management cmd 0x08 timed-out
> [ 34.619542] ufshcd-qcom 1d84000.ufshc: ufshcd_eh_device_reset_handler: failed with err -110
> [ 34.724170] ufshcd-qcom 1d84000.ufshc: __ufshcd_issue_tm_cmd: task management cmd 0x08 timed-out
> [ 34.727563] ufshcd-qcom 1d84000.ufshc: ufshcd_eh_device_reset_handler: failed with err -110
> [ 34.832169] ufshcd-qcom 1d84000.ufshc: __ufshcd_issue_tm_cmd: task management cmd 0x08 timed-out
> [ 34.835539] ufshcd-qcom 1d84000.ufshc: ufshcd_eh_device_reset_handler: failed with err -110
> [ 34.940170] ufshcd-qcom 1d84000.ufshc: __ufshcd_issue_tm_cmd: task management cmd 0x08 timed-out
> [ 34.943576] ufshcd-qcom 1d84000.ufshc: ufshcd_eh_device_reset_handler: failed with err -110
> [ 35.048171] ufshcd-qcom 1d84000.ufshc: __ufshcd_issue_tm_cmd: task management cmd 0x08 timed-out
> [ 35.051618] ufshcd-qcom 1d84000.ufshc: ufshcd_eh_device_reset_handler: failed with err -110
> [ 35.095792] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
> [ 35.099829] ufshcd-qcom 1d84000.ufshc: UPIU[7] - issue time 3165714 us
> [ 35.103402] ufshcd-qcom 1d84000.ufshc: UPIU[7] - complete time 0 us
> [ 35.106937] ufshcd-qcom 1d84000.ufshc: UPIU[7] - Transfer Request Descriptor phys@0x2661cd0e0
> [ 35.117587] ufshcd-qcom 1d84000.ufshc: UPIU[7] - Request UPIU phys@0xdf045400
> [ 35.128237] ufshcd-qcom 1d84000.ufshc: UPIU[7] - Response UPIU phys@0xdf045600
> [ 35.145785] ufshcd-qcom 1d84000.ufshc: UPIU[7] - PRDT - 1 entries phys@0xdf045800
> [ 35.152773] ufshcd-qcom 1d84000.ufshc: UPIU[24] - issue time 3018666 us
> [ 35.156346] ufshcd-qcom 1d84000.ufshc: UPIU[24] - complete time 0 us
> [ 35.159906] ufshcd-qcom 1d84000.ufshc: UPIU[24] - Transfer Request Descriptor phys@0x2661cd300
> [ 35.170605] ufshcd-qcom 1d84000.ufshc: UPIU[24] - Request UPIU phys@0xdf052000
> [ 35.181279] ufshcd-qcom 1d84000.ufshc: UPIU[24] - Response UPIU phys@0xdf052200
> [ 35.198877] ufshcd-qcom 1d84000.ufshc: UPIU[24] - PRDT - 1 entries phys@0xdf052400
> [ 35.205904] ufshcd-qcom 1d84000.ufshc: UPIU[25] - issue time 3017240 us
> [ 35.209398] ufshcd-qcom 1d84000.ufshc: UPIU[25] - complete time 0 us
> [ 35.212913] ufshcd-qcom 1d84000.ufshc: UPIU[25] - Transfer Request Descriptor phys@0x2661cd320
> [ 35.223656] ufshcd-qcom 1d84000.ufshc: UPIU[25] - Request UPIU phys@0xdf052c00
> [ 35.234408] ufshcd-qcom 1d84000.ufshc: UPIU[25] - Response UPIU phys@0xdf052e00
> [ 35.252106] ufshcd-qcom 1d84000.ufshc: UPIU[25] - PRDT - 1 entries phys@0xdf053000
> [ 35.259137] ufshcd-qcom 1d84000.ufshc: UPIU[27] - issue time 3040502 us
> [ 35.262691] ufshcd-qcom 1d84000.ufshc: UPIU[27] - complete time 0 us
> [ 35.266202] ufshcd-qcom 1d84000.ufshc: UPIU[27] - Transfer Request Descriptor phys@0x2661cd360
> [ 35.276857] ufshcd-qcom 1d84000.ufshc: UPIU[27] - Request UPIU phys@0xdf054400
> [ 35.287652] ufshcd-qcom 1d84000.ufshc: UPIU[27] - Response UPIU phys@0xdf054600
> [ 35.305317] ufshcd-qcom 1d84000.ufshc: UPIU[27] - PRDT - 1 entries phys@0xdf054800
> [ 35.312298] ufshcd-qcom 1d84000.ufshc: UPIU[29] - issue time 3036529 us
> [ 35.315788] ufshcd-qcom 1d84000.ufshc: UPIU[29] - complete time 0 us
> [ 35.319240] ufshcd-qcom 1d84000.ufshc: UPIU[29] - Transfer Request Descriptor phys@0x2661cd3a0
> [ 35.329591] ufshcd-qcom 1d84000.ufshc: UPIU[29] - Request UPIU phys@0xdf055c00
> [ 35.339727] ufshcd-qcom 1d84000.ufshc: UPIU[29] - Response UPIU phys@0xdf055e00
> [ 35.356361] ufshcd-qcom 1d84000.ufshc: UPIU[29] - PRDT - 1 entries phys@0xdf056000
> [ 35.363009] ufshcd-qcom 1d84000.ufshc: UPIU[31] - issue time 3036762 us
> [ 35.366321] ufshcd-qcom 1d84000.ufshc: UPIU[31] - complete time 0 us
> [ 35.369646] ufshcd-qcom 1d84000.ufshc: UPIU[31] - Transfer Request Descriptor phys@0x2661cd3e0
> [ 35.379815] ufshcd-qcom 1d84000.ufshc: UPIU[31] - Request UPIU phys@0xdf057400
> [ 35.389919] ufshcd-qcom 1d84000.ufshc: UPIU[31] - Response UPIU phys@0xdf057600
> [ 35.406573] ufshcd-qcom 1d84000.ufshc: UPIU[31] - PRDT - 1 entries phys@0xdf057800
> [ 35.506995] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
next prev parent reply other threads:[~2019-08-28 19:20 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-28 9:09 ufshcd_abort: Device abort task at tag 7 Marc Gonzalez
2019-08-28 19:20 ` Bjorn Andersson [this message]
2019-08-30 13:16 ` russianneuromancer
2019-09-02 8:12 ` Lee Jones
2019-09-03 15:17 ` russianneuromancer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190828192031.GN6167@minitux \
--to=bjorn.andersson@linaro.org \
--cc=alim.akhtar@samsung.com \
--cc=ard.biesheuvel@linaro.org \
--cc=avri.altman@wdc.com \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=marc.w.gonzalez@free.fr \
--cc=runetmember@gmail.com \
--cc=stanley.chu@mediatek.com \
--cc=vivek.gautam@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox