[PATCH V2 04/13] pm80xx : Convert 'long' mdelay to msleep.

[Deepak Ukey <deepak.ukey@microchip.com>]

From: Vikram Auradkar <auradkar@google.com>

For delays longer than 20ms [um]delay isn't recommended.
pm80xx_chip_soft_rst starts off with a 500ms delay before it even
gets around to checking for the results of the reset. As long as
it's at least 500ms it doesn't matter what the scheduler is doing.
The delay in the pm8001_exec_internal_task_abort does nothing, and
theory is this is a delay to avoid a double-free.

Signed-off-by: Vikram Auradkar <auradkar@google.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
---
 drivers/scsi/pm8001/pm80xx_hwi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index ee9c187d8caa..1a1adda15db8 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -1241,7 +1241,7 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
 		pm8001_printk("reset register before write : 0x%x\n", regval));
 
 	pm8001_cw32(pm8001_ha, 0, SPC_REG_SOFT_RESET, SPCv_NORMAL_RESET_VALUE);
-	mdelay(500);
+	msleep(500);
 
 	regval = pm8001_cr32(pm8001_ha, 0, SPC_REG_SOFT_RESET);
 	PM8001_INIT_DBG(pm8001_ha,
@@ -2986,7 +2986,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
 	pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
 	spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
 	if (pm8001_ha->flags == PM8001F_RUN_TIME)
-		mdelay(200);/*delay a moment to wait disk to spinup*/
+		msleep(200);/*delay a moment to wait disk to spinup*/
 	pm8001_bytes_dmaed(pm8001_ha, phy_id);
 }
 
-- 
2.16.3