[PATCH AUTOSEL 4.14 002/127] scsi: lpfc: Fix dif and first burst use in write commands

[Sasha Levin <sashal@kernel.org>]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 7c4042a4d0b7532cfbc90478fd3084b2dab5849e ]

When dif and first burst is used in a write command wqe, the driver was not
properly setting fields in the io command request. This resulted in no dif
bytes being sent and invalid xfer_rdy's, resulting in the io being aborted
by the hardware.

Correct the wqe initializaton when both dif and first burst are used.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_scsi.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 07cb671bb8550..2eba0c39ac1c4 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -2714,6 +2714,7 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba,
 	int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
 	int prot_group_type = 0;
 	int fcpdl;
+	struct lpfc_vport *vport = phba->pport;
 
 	/*
 	 * Start the lpfc command prep by bumping the bpl beyond fcp_cmnd
@@ -2819,6 +2820,14 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba,
 	 */
 	iocb_cmd->un.fcpi.fcpi_parm = fcpdl;
 
+	/*
+	 * For First burst, we may need to adjust the initial transfer
+	 * length for DIF
+	 */
+	if (iocb_cmd->un.fcpi.fcpi_XRdy &&
+	    (fcpdl < vport->cfg_first_burst_size))
+		iocb_cmd->un.fcpi.fcpi_XRdy = fcpdl;
+
 	return 0;
 err:
 	if (lpfc_cmd->seg_cnt)
@@ -3371,6 +3380,7 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
 	int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
 	int prot_group_type = 0;
 	int fcpdl;
+	struct lpfc_vport *vport = phba->pport;
 
 	/*
 	 * Start the lpfc command prep by bumping the sgl beyond fcp_cmnd
@@ -3486,6 +3496,14 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
 	 */
 	iocb_cmd->un.fcpi.fcpi_parm = fcpdl;
 
+	/*
+	 * For First burst, we may need to adjust the initial transfer
+	 * length for DIF
+	 */
+	if (iocb_cmd->un.fcpi.fcpi_XRdy &&
+	    (fcpdl < vport->cfg_first_burst_size))
+		iocb_cmd->un.fcpi.fcpi_XRdy = fcpdl;
+
 	/*
 	 * If the OAS driver feature is enabled and the lun is enabled for
 	 * OAS, set the oas iocb related flags.
-- 
2.20.1