From: Stanley Chu <stanley.chu@mediatek.com>
To: <linux-scsi@vger.kernel.org>, <martin.petersen@oracle.com>,
<avri.altman@wdc.com>, <alim.akhtar@samsung.com>,
<jejb@linux.ibm.com>
Cc: <beanhuo@micron.com>, <asutoshd@codeaurora.org>,
<cang@codeaurora.org>, <matthias.bgg@gmail.com>,
<bvanassche@acm.org>, <linux-mediatek@lists.infradead.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <kuohong.wang@mediatek.com>,
<peter.wang@mediatek.com>, <chun-hung.wu@mediatek.com>,
<andy.teng@mediatek.com>, Stanley Chu <stanley.chu@mediatek.com>
Subject: [PATCH v1 2/3] scsi: ufs: export some functions for vendor usage
Date: Fri, 17 Jan 2020 11:51:07 +0800 [thread overview]
Message-ID: <20200117035108.19699-3-stanley.chu@mediatek.com> (raw)
In-Reply-To: <20200117035108.19699-1-stanley.chu@mediatek.com>
Export below functions for vendor usage,
int ufshcd_hba_enable(struct ufs_hba *hba);
int ufshcd_make_hba_operational(struct ufs_hba *hba);
int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
drivers/scsi/ufs/ufshcd.c | 11 +++++++----
drivers/scsi/ufs/ufshcd.h | 3 +++
2 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index bea036ab189a..1168baf358ea 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -250,7 +250,6 @@ static int ufshcd_probe_hba(struct ufs_hba *hba);
static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
bool skip_ref_clk);
static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on);
-static int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba);
static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba);
static int ufshcd_host_reset_and_restore(struct ufs_hba *hba);
@@ -3865,7 +3864,7 @@ static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba)
return ret;
}
-static int ufshcd_uic_hibern8_exit(struct ufs_hba *hba)
+int ufshcd_uic_hibern8_exit(struct ufs_hba *hba)
{
struct uic_command uic_cmd = {0};
int ret;
@@ -3891,6 +3890,7 @@ static int ufshcd_uic_hibern8_exit(struct ufs_hba *hba)
return ret;
}
+EXPORT_SYMBOL_GPL(ufshcd_uic_hibern8_exit);
void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit)
{
@@ -4162,7 +4162,7 @@ static int ufshcd_complete_dev_init(struct ufs_hba *hba)
*
* Returns 0 on success, non-zero value on failure
*/
-static int ufshcd_make_hba_operational(struct ufs_hba *hba)
+int ufshcd_make_hba_operational(struct ufs_hba *hba)
{
int err = 0;
u32 reg;
@@ -4208,6 +4208,7 @@ static int ufshcd_make_hba_operational(struct ufs_hba *hba)
out:
return err;
}
+EXPORT_SYMBOL_GPL(ufshcd_make_hba_operational);
/**
* ufshcd_hba_stop - Send controller to reset state
@@ -4285,7 +4286,7 @@ static int ufshcd_hba_execute_hce(struct ufs_hba *hba)
return 0;
}
-static int ufshcd_hba_enable(struct ufs_hba *hba)
+int ufshcd_hba_enable(struct ufs_hba *hba)
{
int ret;
@@ -4310,6 +4311,8 @@ static int ufshcd_hba_enable(struct ufs_hba *hba)
return ret;
}
+EXPORT_SYMBOL_GPL(ufshcd_hba_enable);
+
static int ufshcd_disable_tx_lcc(struct ufs_hba *hba, bool peer)
{
int tx_lanes, i, err = 0;
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index b1a1c65be8b1..fca372d98495 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -799,8 +799,11 @@ static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg)
int ufshcd_alloc_host(struct device *, struct ufs_hba **);
void ufshcd_dealloc_host(struct ufs_hba *);
+int ufshcd_hba_enable(struct ufs_hba *hba);
int ufshcd_init(struct ufs_hba * , void __iomem * , unsigned int);
+int ufshcd_make_hba_operational(struct ufs_hba *hba);
void ufshcd_remove(struct ufs_hba *);
+int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask,
u32 val, unsigned long interval_us,
unsigned long timeout_ms, bool can_sleep);
--
2.18.0
next prev parent reply other threads:[~2020-01-17 3:51 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-17 3:51 [PATCH v1 0/3] scsi: ufs-mediatek: add MediaTek vendor implementation part II Stanley Chu
2020-01-17 3:51 ` [PATCH v1 1/3] scsi: ufs-mediatek: add dbg_register_dump implementation Stanley Chu
2020-01-19 14:05 ` Alim Akhtar
2020-01-17 3:51 ` Stanley Chu [this message]
2020-01-19 14:12 ` [PATCH v1 2/3] scsi: ufs: export some functions for vendor usage Alim Akhtar
2020-01-20 20:49 ` Asutosh Das (asd)
2020-01-17 3:51 ` [PATCH v1 3/3] scsi: ufs-mediatek: enable low-power mode for hibern8 state Stanley Chu
2020-01-19 14:27 ` Alim Akhtar
2020-01-20 20:52 ` Asutosh Das (asd)
2020-01-21 0:10 ` [PATCH v1 0/3] scsi: ufs-mediatek: add MediaTek vendor implementation part II Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200117035108.19699-3-stanley.chu@mediatek.com \
--to=stanley.chu@mediatek.com \
--cc=alim.akhtar@samsung.com \
--cc=andy.teng@mediatek.com \
--cc=asutoshd@codeaurora.org \
--cc=avri.altman@wdc.com \
--cc=beanhuo@micron.com \
--cc=bvanassche@acm.org \
--cc=cang@codeaurora.org \
--cc=chun-hung.wu@mediatek.com \
--cc=jejb@linux.ibm.com \
--cc=kuohong.wang@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=matthias.bgg@gmail.com \
--cc=peter.wang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox