From: Alexander Lobakin <alobakin@marvell.com>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>
Cc: Alexander Lobakin <alobakin@marvell.com>,
Igor Russkikh <irusskikh@marvell.com>,
Michal Kalderon <michal.kalderon@marvell.com>,
"Ariel Elior" <aelior@marvell.com>,
Denis Bolotin <denis.bolotin@marvell.com>,
"James E.J. Bottomley" <jejb@linux.ibm.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
<GR-everest-linux-l2@marvell.com>,
<QLogic-Storage-Upstream@cavium.com>, <netdev@vger.kernel.org>,
<linux-scsi@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH net-next 10/13] qed: add support for new port modes
Date: Thu, 16 Jul 2020 14:54:43 +0300 [thread overview]
Message-ID: <20200716115446.994-11-alobakin@marvell.com> (raw)
In-Reply-To: <20200716115446.994-1-alobakin@marvell.com>
These ports ship on new boards revisions and are supported by newer
firmware versions.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
---
drivers/net/ethernet/qlogic/qed/qed.h | 5 +++++
drivers/net/ethernet/qlogic/qed/qed_dev.c | 15 +++++++++++++++
drivers/net/ethernet/qlogic/qed/qed_hsi.h | 5 +++++
3 files changed, 25 insertions(+)
diff --git a/drivers/net/ethernet/qlogic/qed/qed.h b/drivers/net/ethernet/qlogic/qed/qed.h
index 6a1d12da7910..63fcbd5a295a 100644
--- a/drivers/net/ethernet/qlogic/qed/qed.h
+++ b/drivers/net/ethernet/qlogic/qed/qed.h
@@ -257,6 +257,11 @@ enum QED_PORT_MODE {
QED_PORT_MODE_DE_1X25G,
QED_PORT_MODE_DE_4X25G,
QED_PORT_MODE_DE_2X10G,
+ QED_PORT_MODE_DE_2X50G_R1,
+ QED_PORT_MODE_DE_4X50G_R1,
+ QED_PORT_MODE_DE_1X100G_R2,
+ QED_PORT_MODE_DE_2X100G_R2,
+ QED_PORT_MODE_DE_1X100G_R4,
};
enum qed_dev_cap {
diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index d929556247a5..4bad836d0f74 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -4026,6 +4026,21 @@ static int qed_hw_get_nvm_info(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
case NVM_CFG1_GLOB_NETWORK_PORT_MODE_4X25G:
p_hwfn->hw_info.port_mode = QED_PORT_MODE_DE_4X25G;
break;
+ case NVM_CFG1_GLOB_NETWORK_PORT_MODE_AHP_2X50G_R1:
+ p_hwfn->hw_info.port_mode = QED_PORT_MODE_DE_2X50G_R1;
+ break;
+ case NVM_CFG1_GLOB_NETWORK_PORT_MODE_AHP_4X50G_R1:
+ p_hwfn->hw_info.port_mode = QED_PORT_MODE_DE_4X50G_R1;
+ break;
+ case NVM_CFG1_GLOB_NETWORK_PORT_MODE_AHP_1X100G_R2:
+ p_hwfn->hw_info.port_mode = QED_PORT_MODE_DE_1X100G_R2;
+ break;
+ case NVM_CFG1_GLOB_NETWORK_PORT_MODE_AHP_2X100G_R2:
+ p_hwfn->hw_info.port_mode = QED_PORT_MODE_DE_2X100G_R2;
+ break;
+ case NVM_CFG1_GLOB_NETWORK_PORT_MODE_AHP_1X100G_R4:
+ p_hwfn->hw_info.port_mode = QED_PORT_MODE_DE_1X100G_R4;
+ break;
default:
DP_NOTICE(p_hwfn, "Unknown port mode in 0x%08x\n", core_cfg);
break;
diff --git a/drivers/net/ethernet/qlogic/qed/qed_hsi.h b/drivers/net/ethernet/qlogic/qed/qed_hsi.h
index a4a845579fd2..debc55923251 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_hsi.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_hsi.h
@@ -13015,6 +13015,11 @@ struct nvm_cfg1_glob {
#define NVM_CFG1_GLOB_NETWORK_PORT_MODE_1X25G 0xd
#define NVM_CFG1_GLOB_NETWORK_PORT_MODE_4X25G 0xe
#define NVM_CFG1_GLOB_NETWORK_PORT_MODE_2X10G 0xf
+#define NVM_CFG1_GLOB_NETWORK_PORT_MODE_AHP_2X50G_R1 0x11
+#define NVM_CFG1_GLOB_NETWORK_PORT_MODE_AHP_4X50G_R1 0x12
+#define NVM_CFG1_GLOB_NETWORK_PORT_MODE_AHP_1X100G_R2 0x13
+#define NVM_CFG1_GLOB_NETWORK_PORT_MODE_AHP_2X100G_R2 0x14
+#define NVM_CFG1_GLOB_NETWORK_PORT_MODE_AHP_1X100G_R4 0x15
u32 e_lane_cfg1;
u32 e_lane_cfg2;
--
2.25.1
next prev parent reply other threads:[~2020-07-16 11:57 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-16 11:54 [PATCH net-next 00/13] qed/qede: add support for new operating modes Alexander Lobakin
2020-07-16 11:54 ` [PATCH net-next 01/13] qed: convert link mode from u32 to bitmap Alexander Lobakin
2020-07-16 11:54 ` [PATCH net-next 02/13] qed: reformat public_port::transceiver_data a bit Alexander Lobakin
2020-07-16 11:54 ` [PATCH net-next 03/13] qed: add support for multi-rate transceivers Alexander Lobakin
2020-07-16 11:54 ` [PATCH net-next 04/13] qed: use transceiver data to fill link partner's advertising speeds Alexander Lobakin
2020-07-16 11:54 ` [PATCH net-next 05/13] qed: reformat several structures a bit Alexander Lobakin
2020-07-16 11:54 ` [PATCH net-next 06/13] qed: add support for Forward Error Correction Alexander Lobakin
2020-07-16 11:54 ` [PATCH net-next 07/13] qede: format qede{,_vf}_ethtool_ops Alexander Lobakin
2020-07-16 11:54 ` [PATCH net-next 08/13] qede: introduce support for FEC control Alexander Lobakin
2020-07-16 11:54 ` [PATCH net-next 09/13] qed: reformat several structures a bit Alexander Lobakin
2020-07-16 11:54 ` Alexander Lobakin [this message]
2020-07-17 1:18 ` [PATCH net-next 10/13] qed: add support for new port modes Jakub Kicinski
2020-07-17 10:44 ` Alexander Lobakin
2020-07-17 10:49 ` [EXT] " Igor Russkikh
2020-07-17 18:31 ` Jakub Kicinski
2020-07-17 19:26 ` Alexander Lobakin
2020-07-16 11:54 ` [PATCH net-next 11/13] qed: add missing loopback modes Alexander Lobakin
2020-07-16 11:54 ` [PATCH net-next 12/13] qed: populate supported link modes maps on module init Alexander Lobakin
2020-07-16 11:54 ` [PATCH net-next 13/13] qed/qede: add support for the extended speed and FEC modes Alexander Lobakin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200716115446.994-11-alobakin@marvell.com \
--to=alobakin@marvell.com \
--cc=GR-everest-linux-l2@marvell.com \
--cc=QLogic-Storage-Upstream@cavium.com \
--cc=aelior@marvell.com \
--cc=davem@davemloft.net \
--cc=denis.bolotin@marvell.com \
--cc=irusskikh@marvell.com \
--cc=jejb@linux.ibm.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=michal.kalderon@marvell.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox