linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tyrel Datwyler <tyreld@linux.ibm.com>
To: james.bottomley@hansenpartnership.com
Cc: martin.petersen@oracle.com, linux-scsi@vger.kernel.org,
	linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
	brking@linux.ibm.com, Tyrel Datwyler <tyreld@linux.ibm.com>
Subject: [PATCH v2 15/17] ibmvfc: send Cancel MAD down each hw scsi channel
Date: Tue,  1 Dec 2020 18:53:27 -0600	[thread overview]
Message-ID: <20201202005329.4538-16-tyreld@linux.ibm.com> (raw)
In-Reply-To: <20201202005329.4538-1-tyreld@linux.ibm.com>

In general the client needs to send Cancel MADs and task management
commands down the same channel as the command(s) intended to cancel or
abort. The client assigns cancel keys per LUN and thus must send a
Cancel down each channel commands were submitted for that LUN. Further,
the client then must wait for those cancel completions prior to
submitting a LUN RESET or ABORT TASK SET.

Allocate event pointers for each possible scsi channel and assign an
event for each channel that requires a cancel. Wait for completion each
submitted cancel.

Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 106 +++++++++++++++++++++------------
 1 file changed, 68 insertions(+), 38 deletions(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 0b6284020f06..97e8eed04b01 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -2339,32 +2339,52 @@ static int ibmvfc_cancel_all(struct scsi_device *sdev, int type)
 {
 	struct ibmvfc_host *vhost = shost_priv(sdev->host);
 	struct ibmvfc_event *evt, *found_evt;
-	union ibmvfc_iu rsp;
-	int rsp_rc = -EBUSY;
+	struct ibmvfc_event **evt_list;
+	union ibmvfc_iu *rsp;
+	int rsp_rc = 0;
 	unsigned long flags;
 	u16 status;
+	int num_hwq = 1;
+	int i;
+	int ret = 0;
 
 	ENTER;
 	spin_lock_irqsave(vhost->host->host_lock, flags);
-	found_evt = NULL;
-	list_for_each_entry(evt, &vhost->sent, queue) {
-		if (evt->cmnd && evt->cmnd->device == sdev) {
-			found_evt = evt;
-			break;
+	if (vhost->using_channels && vhost->scsi_scrqs.active_queues)
+		num_hwq = vhost->scsi_scrqs.active_queues;
+
+	evt_list = kcalloc(num_hwq, sizeof(*evt_list), GFP_KERNEL);
+	rsp = kcalloc(num_hwq, sizeof(*rsp), GFP_KERNEL);
+
+	for (i = 0; i < num_hwq; i++) {
+		sdev_printk(KERN_INFO, sdev, "Cancelling outstanding commands on queue %d.\n", i);
+
+		found_evt = NULL;
+		list_for_each_entry(evt, &vhost->sent, queue) {
+			if (evt->cmnd && evt->cmnd->device == sdev && evt->hwq == i) {
+				found_evt = evt;
+				break;
+			}
 		}
-	}
 
-	if (!found_evt) {
-		if (vhost->log_level > IBMVFC_DEFAULT_LOG_LEVEL)
-			sdev_printk(KERN_INFO, sdev, "No events found to cancel\n");
-		spin_unlock_irqrestore(vhost->host->host_lock, flags);
-		return 0;
-	}
+		if (!found_evt) {
+			if (vhost->log_level > IBMVFC_DEFAULT_LOG_LEVEL)
+				sdev_printk(KERN_INFO, sdev, "No events found to cancel on queue %d\n", i);
+			continue;
+		}
 
-	if (vhost->logged_in) {
-		evt = ibmvfc_init_tmf(vhost, sdev, type);
-		evt->sync_iu = &rsp;
-		rsp_rc = ibmvfc_send_event(evt, vhost, default_timeout);
+
+		if (vhost->logged_in) {
+			evt_list[i] = ibmvfc_init_tmf(vhost, sdev, type);
+			evt_list[i]->hwq = i;
+			evt_list[i]->sync_iu = &rsp[i];
+			rsp_rc = ibmvfc_send_event(evt_list[i], vhost, default_timeout);
+			if (rsp_rc)
+				break;
+		} else {
+			rsp_rc = -EBUSY;
+			break;
+		}
 	}
 
 	spin_unlock_irqrestore(vhost->host->host_lock, flags);
@@ -2374,32 +2394,42 @@ static int ibmvfc_cancel_all(struct scsi_device *sdev, int type)
 		/* If failure is received, the host adapter is most likely going
 		 through reset, return success so the caller will wait for the command
 		 being cancelled to get returned */
-		return 0;
+		goto free_mem;
 	}
 
-	sdev_printk(KERN_INFO, sdev, "Cancelling outstanding commands.\n");
-
-	wait_for_completion(&evt->comp);
-	status = be16_to_cpu(rsp.mad_common.status);
-	spin_lock_irqsave(vhost->host->host_lock, flags);
-	ibmvfc_free_event(evt);
-	spin_unlock_irqrestore(vhost->host->host_lock, flags);
+	for (i = 0; i < num_hwq; i++) {
+		if (!evt_list[i])
+			continue;
 
-	if (status != IBMVFC_MAD_SUCCESS) {
-		sdev_printk(KERN_WARNING, sdev, "Cancel failed with rc=%x\n", status);
-		switch (status) {
-		case IBMVFC_MAD_DRIVER_FAILED:
-		case IBMVFC_MAD_CRQ_ERROR:
-			/* Host adapter most likely going through reset, return success to
-			 the caller will wait for the command being cancelled to get returned */
-			return 0;
-		default:
-			return -EIO;
-		};
+		wait_for_completion(&evt_list[i]->comp);
+		status = be16_to_cpu(rsp[i].mad_common.status);
+
+		if (status != IBMVFC_MAD_SUCCESS) {
+			sdev_printk(KERN_WARNING, sdev, "Cancel failed with rc=%x\n", status);
+			switch (status) {
+			case IBMVFC_MAD_DRIVER_FAILED:
+			case IBMVFC_MAD_CRQ_ERROR:
+				/* Host adapter most likely going through reset, return success to
+				 the caller will wait for the command being cancelled to get returned */
+				goto free_mem;
+			default:
+				ret = -EIO;
+				goto free_mem;
+			};
+		}
 	}
 
 	sdev_printk(KERN_INFO, sdev, "Successfully cancelled outstanding commands\n");
-	return 0;
+free_mem:
+	spin_lock_irqsave(vhost->host->host_lock, flags);
+	for (i = 0; i < num_hwq; i++)
+		if (evt_list[i])
+			ibmvfc_free_event(evt_list[i]);
+	spin_unlock_irqrestore(vhost->host->host_lock, flags);
+	kfree(evt_list);
+	kfree(rsp);
+
+	return ret;
 }
 
 /**
-- 
2.27.0


  parent reply	other threads:[~2020-12-02  0:54 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-02  0:53 [PATCH v2 00/17] ibmvfc: initial MQ development Tyrel Datwyler
2020-12-02  0:53 ` [PATCH v2 01/17] ibmvfc: add vhost fields and defaults for MQ enablement Tyrel Datwyler
2020-12-02 15:14   ` Brian King
2020-12-02 17:27     ` Tyrel Datwyler
2020-12-04 14:26       ` Brian King
2020-12-07 11:56         ` Hannes Reinecke
2020-12-08 22:37           ` Tyrel Datwyler
2020-12-17 11:49             ` John Garry
2020-12-02  0:53 ` [PATCH v2 02/17] ibmvfc: define hcall wrapper for registering a Sub-CRQ Tyrel Datwyler
2020-12-02  0:53 ` [PATCH v2 03/17] ibmvfc: add Subordinate CRQ definitions Tyrel Datwyler
2020-12-02  0:53 ` [PATCH v2 04/17] ibmvfc: add alloc/dealloc routines for SCSI Sub-CRQ Channels Tyrel Datwyler
2020-12-02 15:25   ` Brian King
2020-12-02 22:23     ` Tyrel Datwyler
2020-12-02  0:53 ` [PATCH v2 05/17] ibmvfc: add Sub-CRQ IRQ enable/disable routine Tyrel Datwyler
2020-12-02  0:53 ` [PATCH v2 06/17] ibmvfc: add handlers to drain and complete Sub-CRQ responses Tyrel Datwyler
2020-12-02 15:46   ` Brian King
2020-12-02 22:28     ` Tyrel Datwyler
2020-12-02 15:56   ` Brian King
2020-12-02  0:53 ` [PATCH v2 07/17] ibmvfc: define Sub-CRQ interrupt handler routine Tyrel Datwyler
2020-12-02  0:53 ` [PATCH v2 08/17] ibmvfc: map/request irq and register Sub-CRQ interrupt handler Tyrel Datwyler
2020-12-02  0:53 ` [PATCH v2 09/17] ibmvfc: implement channel enquiry and setup commands Tyrel Datwyler
2020-12-02 15:51   ` Brian King
2020-12-02  0:53 ` [PATCH v2 10/17] ibmvfc: advertise client support for using hardware channels Tyrel Datwyler
2020-12-02  0:53 ` [PATCH v2 11/17] ibmvfc: set and track hw queue in ibmvfc_event struct Tyrel Datwyler
2020-12-02  0:53 ` [PATCH v2 12/17] ibmvfc: send commands down HW Sub-CRQ when channelized Tyrel Datwyler
2020-12-02  0:53 ` [PATCH v2 13/17] ibmvfc: register Sub-CRQ handles with VIOS during channel setup Tyrel Datwyler
2020-12-02  0:53 ` [PATCH v2 14/17] ibmvfc: add cancel mad initialization helper Tyrel Datwyler
2020-12-02 16:00   ` Brian King
2020-12-02  0:53 ` Tyrel Datwyler [this message]
2020-12-02 18:27   ` [PATCH v2 15/17] ibmvfc: send Cancel MAD down each hw scsi channel Brian King
2020-12-02 22:09     ` Tyrel Datwyler
2020-12-02  0:53 ` [PATCH v2 16/17] ibmvfc: enable MQ and set reasonable defaults Tyrel Datwyler
2020-12-02 18:31   ` Brian King
2020-12-02  0:53 ` [PATCH v2 17/17] ibmvfc: provide modules parameters for MQ settings Tyrel Datwyler
2020-12-02 18:40   ` Brian King
2020-12-02 22:17     ` Tyrel Datwyler

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201202005329.4538-16-tyreld@linux.ibm.com \
    --to=tyreld@linux.ibm.com \
    --cc=brking@linux.ibm.com \
    --cc=james.bottomley@hansenpartnership.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=martin.petersen@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).