From: Hannes Reinecke <hare@suse.de>
To: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>,
James Bottomley <james.bottomley@hansenpartnership.com>,
Bart van Assche <bvanassche@acm.org>,
linux-scsi@vger.kernel.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCH 15/42] NCR5380: use SCSI result accessors
Date: Wed, 21 Apr 2021 19:47:22 +0200 [thread overview]
Message-ID: <20210421174749.11221-16-hare@suse.de> (raw)
In-Reply-To: <20210421174749.11221-1-hare@suse.de>
Use accessors to set the SCSI result.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/NCR5380.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index d7594b794d3c..855edda9db41 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -538,7 +538,7 @@ static void complete_cmd(struct Scsi_Host *instance,
if (hostdata->sensing == cmd) {
/* Autosense processing ends here */
- if (status_byte(cmd->result) != GOOD) {
+ if (get_status_byte(cmd) != SAM_STAT_GOOD) {
scsi_eh_restore_cmnd(cmd, &hostdata->ses);
} else {
scsi_eh_restore_cmnd(cmd, &hostdata->ses);
@@ -567,18 +567,19 @@ static int NCR5380_queue_command(struct Scsi_Host *instance,
struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
unsigned long flags;
+ set_host_byte(cmd, DID_OK);
+ set_status_byte(cmd, SAM_STAT_GOOD);
#if (NDEBUG & NDEBUG_NO_WRITE)
switch (cmd->cmnd[0]) {
case WRITE_6:
case WRITE_10:
shost_printk(KERN_DEBUG, instance, "WRITE attempted with NDEBUG_NO_WRITE set\n");
- cmd->result = (DID_ERROR << 16);
+ set_host_byte(cmd, DID_ERROR);
cmd->scsi_done(cmd);
return 0;
}
#endif /* (NDEBUG & NDEBUG_NO_WRITE) */
- cmd->result = 0;
spin_lock_irqsave(&hostdata->lock, flags);
@@ -1154,7 +1155,7 @@ static bool NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
if (!hostdata->selecting)
return false;
- cmd->result = DID_BAD_TARGET << 16;
+ set_host_byte(cmd, DID_BAD_TARGET);
complete_cmd(instance, cmd);
dsprintk(NDEBUG_SELECTION, instance,
"target did not respond within 250ms\n");
@@ -1203,7 +1204,7 @@ static bool NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
NCR5380_transfer_pio(instance, &phase, &len, &data, 0);
if (len) {
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- cmd->result = DID_ERROR << 16;
+ set_host_byte(cmd, DID_ERROR);
complete_cmd(instance, cmd);
dsprintk(NDEBUG_SELECTION, instance, "IDENTIFY message transfer failed\n");
ret = false;
@@ -1743,7 +1744,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
shost_printk(KERN_DEBUG, instance, "NDEBUG_NO_DATAOUT set, attempted DATAOUT aborted\n");
sink = 1;
do_abort(instance, 0);
- cmd->result = DID_ERROR << 16;
+ set_host_byte(cmd, DID_ERROR);
complete_cmd(instance, cmd);
hostdata->connected = NULL;
hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
@@ -1826,9 +1827,8 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
hostdata->connected = NULL;
hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
- cmd->result &= ~0xffff;
- cmd->result |= cmd->SCp.Status;
- cmd->result |= cmd->SCp.Message << 8;
+ set_msg_byte(cmd, cmd->SCp.Message);
+ set_status_byte(cmd, cmd->SCp.Status);
set_resid_from_SCp(cmd);
@@ -1980,7 +1980,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
if (msgout == ABORT) {
hostdata->connected = NULL;
hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
- cmd->result = DID_ERROR << 16;
+ set_host_byte(cmd, DID_ERROR);
complete_cmd(instance, cmd);
return;
}
@@ -2261,7 +2261,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
if (list_del_cmd(&hostdata->unissued, cmd)) {
dsprintk(NDEBUG_ABORT, instance,
"abort: removed %p from issue queue\n", cmd);
- cmd->result = DID_ABORT << 16;
+ set_host_byte(cmd, DID_ABORT);
cmd->scsi_done(cmd); /* No tag or busy flag to worry about */
goto out;
}
@@ -2270,7 +2270,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
dsprintk(NDEBUG_ABORT, instance,
"abort: cmd %p == selecting\n", cmd);
hostdata->selecting = NULL;
- cmd->result = DID_ABORT << 16;
+ set_host_byte(cmd, DID_ABORT);
complete_cmd(instance, cmd);
goto out;
}
@@ -2341,7 +2341,7 @@ static void bus_reset_cleanup(struct Scsi_Host *instance)
*/
if (hostdata->selecting) {
- hostdata->selecting->result = DID_RESET << 16;
+ set_host_byte(hostdata->selecting, DID_RESET);
complete_cmd(instance, hostdata->selecting);
hostdata->selecting = NULL;
}
@@ -2399,7 +2399,7 @@ static int NCR5380_host_reset(struct scsi_cmnd *cmd)
list_for_each_entry(ncmd, &hostdata->unissued, list) {
struct scsi_cmnd *scmd = NCR5380_to_scmd(ncmd);
- scmd->result = DID_RESET << 16;
+ set_host_byte(scmd, DID_RESET);
scmd->scsi_done(scmd);
}
INIT_LIST_HEAD(&hostdata->unissued);
--
2.29.2
next prev parent reply other threads:[~2021-04-21 17:48 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-21 17:47 [RFC PATCH 00/42] SCSI result cleanup, part 2 Hannes Reinecke
2021-04-21 17:47 ` [PATCH 01/42] st: return error code in st_scsi_execute() Hannes Reinecke
2021-04-21 20:56 ` Bart Van Assche
2021-04-21 17:47 ` [PATCH 02/42] scsi_ioctl: return error code when blk_rq_map_kern() fails Hannes Reinecke
2021-04-21 21:01 ` Bart Van Assche
2021-04-22 6:29 ` Hannes Reinecke
2021-04-21 17:47 ` [PATCH 03/42] scsi_dh_alua: do not interpret DRIVER_ERROR Hannes Reinecke
2021-04-21 17:47 ` [PATCH 04/42] scsi: Fixup calling convention for scsi_mode_sense() Hannes Reinecke
2021-04-21 17:47 ` [PATCH 05/42] scsi: stop using DRIVER_ERROR Hannes Reinecke
2021-04-21 21:30 ` Bart Van Assche
2021-04-22 8:39 ` Hannes Reinecke
2021-04-21 17:47 ` [PATCH 06/42] scsi: introduce scsi_build_sense() Hannes Reinecke
2021-04-21 17:47 ` [PATCH 07/42] scsi: Kill DRIVER_SENSE Hannes Reinecke
2021-04-21 19:46 ` Douglas Gilbert
2021-04-21 20:07 ` Hannes Reinecke
2021-04-21 21:06 ` Bart Van Assche
2021-04-22 6:31 ` Hannes Reinecke
2021-04-22 15:46 ` Douglas Gilbert
2021-04-21 17:47 ` [PATCH 08/42] scsi: do not use DRIVER_INVALID Hannes Reinecke
2021-04-21 17:47 ` [PATCH 09/42] scsi_error: use DID_TIME_OUT instead of DRIVER_TIMEOUT Hannes Reinecke
2021-04-21 17:47 ` [PATCH 10/42] xen-scsiback: use DID_ERROR instead of DRIVER_ERROR Hannes Reinecke
2021-04-21 17:47 ` [PATCH 11/42] xen-scsifront: compability status handling Hannes Reinecke
2021-04-21 17:47 ` [PATCH 12/42] scsi: Drop the now obsolete driver_byte definitions Hannes Reinecke
2021-04-21 17:47 ` [PATCH 13/42] scsi: add get_{status,host}_byte() accessor function Hannes Reinecke
2021-04-21 21:09 ` Bart Van Assche
2021-04-22 6:33 ` Hannes Reinecke
2021-04-21 17:47 ` [PATCH 14/42] scsi: add scsi_result_is_good() Hannes Reinecke
2021-04-21 21:10 ` Bart Van Assche
2021-04-21 21:58 ` Douglas Gilbert
2021-04-22 8:42 ` Hannes Reinecke
2021-04-22 9:36 ` Finn Thain
2021-04-22 15:56 ` Douglas Gilbert
2021-04-22 16:51 ` Douglas Gilbert
2021-04-22 16:52 ` Bart Van Assche
2021-04-22 17:33 ` Douglas Gilbert
2021-04-26 8:45 ` Hannes Reinecke
2021-04-22 6:34 ` Hannes Reinecke
2021-04-21 17:47 ` Hannes Reinecke [this message]
2021-04-21 21:11 ` [PATCH 15/42] NCR5380: use SCSI result accessors Bart Van Assche
2021-04-22 6:37 ` Hannes Reinecke
2021-04-22 16:10 ` Bart Van Assche
2021-04-26 8:30 ` Hannes Reinecke
2021-04-22 9:36 ` Finn Thain
2021-04-21 17:47 ` [PATCH 16/42] NCR5380: Fold SCSI message ABORT onto DID_ABORT Hannes Reinecke
2021-04-22 9:35 ` Finn Thain
2021-04-21 17:47 ` [PATCH 17/42] scsi: add translate_msg_byte() Hannes Reinecke
2021-04-21 17:47 ` [PATCH 18/42] dc395: use standard macros to set SCSI result Hannes Reinecke
2021-04-21 22:26 ` Bart Van Assche
2021-04-22 8:52 ` Hannes Reinecke
2021-04-22 16:12 ` Bart Van Assche
2021-04-21 17:47 ` [PATCH 19/42] dc395: translate message bytes Hannes Reinecke
2021-04-21 17:47 ` [PATCH 20/42] qlogicfas408: make ql_pcmd() a void function Hannes Reinecke
2021-04-21 17:47 ` [PATCH 21/42] qlogicfas408: whitespace cleanup Hannes Reinecke
2021-04-21 17:47 ` [PATCH 22/42] qlogicfas408: translate message to host byte status Hannes Reinecke
2021-04-21 17:47 ` [PATCH 23/42] nsp32: use standard macros to set SCSI result Hannes Reinecke
2021-04-21 17:47 ` [PATCH 24/42] nsp32: whitespace cleanup Hannes Reinecke
2021-04-21 17:47 ` [PATCH 25/42] nsp32: do not set message byte Hannes Reinecke
2021-04-21 17:47 ` [PATCH 26/42] wd33c93: use standard macros to set SCSI result Hannes Reinecke
2021-04-21 17:47 ` [PATCH 27/42] wd33c93: translate message byte to host byte Hannes Reinecke
2021-04-21 17:47 ` [PATCH 28/42] mesh: use standard macros to set SCSI result Hannes Reinecke
2021-04-21 17:47 ` [PATCH 29/42] mesh: translate message to host byte status Hannes Reinecke
2021-04-21 17:47 ` [PATCH 30/42] acornscsi: use standard macros to set SCSI result Hannes Reinecke
2021-04-21 17:47 ` [PATCH 31/42] acornscsi: remove acornscsi_reportstatus() Hannes Reinecke
2021-04-21 17:47 ` [PATCH 32/42] acornscsi: translate message byte to host byte Hannes Reinecke
2021-04-21 17:47 ` [PATCH 33/42] aha152x: modify done() to use separate status bytes Hannes Reinecke
2021-04-21 17:47 ` [PATCH 34/42] aha152x: do not set message byte when calling scsi_done() Hannes Reinecke
2021-04-21 17:47 ` [PATCH 35/42] advansys: do not set message byte in SCSI status Hannes Reinecke
2021-04-21 17:47 ` [PATCH 36/42] advansys: use SCSI result accessors Hannes Reinecke
2021-04-21 17:47 ` [PATCH 37/42] fas216: translate message to host byte status Hannes Reinecke
2021-04-21 17:47 ` [PATCH 38/42] fas216: convert to SCSI Accessors Hannes Reinecke
2021-04-21 17:47 ` [PATCH 39/42] fdomain: drop last argument to fdomain_finish_cmd() Hannes Reinecke
2021-04-21 17:47 ` [PATCH 40/42] fdomain: translate message to host byte status Hannes Reinecke
2021-04-21 17:47 ` [PATCH 41/42] scsi: drop message byte helper Hannes Reinecke
2021-04-21 21:14 ` Bart Van Assche
2021-04-22 6:37 ` Hannes Reinecke
2021-04-21 17:47 ` [PATCH 42/42] scsi: kill message byte Hannes Reinecke
2021-04-21 20:54 ` [RFC PATCH 00/42] SCSI result cleanup, part 2 Bart Van Assche
2021-04-21 22:26 ` Bart Van Assche
2021-04-22 8:49 ` Hannes Reinecke
2021-04-22 16:28 ` Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210421174749.11221-16-hare@suse.de \
--to=hare@suse.de \
--cc=bvanassche@acm.org \
--cc=hch@lst.de \
--cc=james.bottomley@hansenpartnership.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox