From: Hannes Reinecke <hare@suse.de>
To: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>,
James Bottomley <james.bottomley@hansenpartnership.com>,
Bart van Assche <bvanassche@acm.org>,
linux-scsi@vger.kernel.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCH 33/42] aha152x: modify done() to use separate status bytes
Date: Wed, 21 Apr 2021 19:47:40 +0200 [thread overview]
Message-ID: <20210421174749.11221-34-hare@suse.de> (raw)
In-Reply-To: <20210421174749.11221-1-hare@suse.de>
Instead of passing in the combined SCSI result value split them
off into separate status, message, and host byte values.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/aha152x.c | 43 ++++++++++++++++++++++++++++--------------
1 file changed, 29 insertions(+), 14 deletions(-)
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index d8e19afa7a14..f59d11f8080a 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -619,7 +619,8 @@ static struct {
static irqreturn_t intr(int irq, void *dev_id);
static void reset_ports(struct Scsi_Host *shpnt);
static void aha152x_error(struct Scsi_Host *shpnt, char *msg);
-static void done(struct Scsi_Host *shpnt, int error);
+static void done(struct Scsi_Host *shpnt, unsigned char status_byte,
+ unsigned char msg_byte, unsigned char host_byte);
/* diagnostics */
static void show_command(struct scsi_cmnd * ptr);
@@ -1271,7 +1272,8 @@ static int aha152x_biosparam(struct scsi_device *sdev, struct block_device *bdev
* Internal done function
*
*/
-static void done(struct Scsi_Host *shpnt, int error)
+static void done(struct Scsi_Host *shpnt, unsigned char status_byte,
+ unsigned char msg_byte, unsigned char host_byte)
{
if (CURRENT_SC) {
if(DONE_SC)
@@ -1281,7 +1283,9 @@ static void done(struct Scsi_Host *shpnt, int error)
DONE_SC = CURRENT_SC;
CURRENT_SC = NULL;
- DONE_SC->result = error;
+ DONE_SC->result = status_byte;
+ set_msg_byte(DONE_SC, msg_byte);
+ set_host_byte(DONE_SC, host_byte);
} else
printk(KERN_ERR "aha152x: done() called outside of command\n");
}
@@ -1376,13 +1380,16 @@ static void busfree_run(struct Scsi_Host *shpnt)
if(CURRENT_SC->SCp.phase & completed) {
/* target sent COMMAND COMPLETE */
- done(shpnt, (CURRENT_SC->SCp.Status & 0xff) | ((CURRENT_SC->SCp.Message & 0xff) << 8) | (DID_OK << 16));
+ done(shpnt, CURRENT_SC->SCp.Status,
+ CURRENT_SC->SCp.Message, DID_OK);
} else if(CURRENT_SC->SCp.phase & aborted) {
- done(shpnt, (CURRENT_SC->SCp.Status & 0xff) | ((CURRENT_SC->SCp.Message & 0xff) << 8) | (DID_ABORT << 16));
+ done(shpnt, CURRENT_SC->SCp.Status,
+ CURRENT_SC->SCp.Message, DID_ABORT);
} else if(CURRENT_SC->SCp.phase & resetted) {
- done(shpnt, (CURRENT_SC->SCp.Status & 0xff) | ((CURRENT_SC->SCp.Message & 0xff) << 8) | (DID_RESET << 16));
+ done(shpnt, CURRENT_SC->SCp.Status,
+ CURRENT_SC->SCp.Message, DID_RESET);
} else if(CURRENT_SC->SCp.phase & disconnected) {
/* target sent DISCONNECT */
@@ -1394,7 +1401,8 @@ static void busfree_run(struct Scsi_Host *shpnt)
CURRENT_SC = NULL;
} else {
- done(shpnt, DID_ERROR << 16);
+ done(shpnt, SAM_STAT_GOOD,
+ COMMAND_COMPLETE, DID_ERROR);
}
#if defined(AHA152X_STAT)
} else {
@@ -1515,7 +1523,8 @@ static void seldo_run(struct Scsi_Host *shpnt)
if (TESTLO(SSTAT0, SELDO)) {
scmd_printk(KERN_ERR, CURRENT_SC,
"aha152x: passing bus free condition\n");
- done(shpnt, DID_NO_CONNECT << 16);
+ done(shpnt, SAM_STAT_GOOD,
+ COMMAND_COMPLETE, DID_NO_CONNECT);
return;
}
@@ -1552,12 +1561,15 @@ static void selto_run(struct Scsi_Host *shpnt)
CURRENT_SC->SCp.phase &= ~selecting;
if (CURRENT_SC->SCp.phase & aborted)
- done(shpnt, DID_ABORT << 16);
+ done(shpnt, SAM_STAT_GOOD,
+ COMMAND_COMPLETE, DID_ABORT);
else if (TESTLO(SSTAT0, SELINGO))
- done(shpnt, DID_BUS_BUSY << 16);
+ done(shpnt, SAM_STAT_GOOD,
+ COMMAND_COMPLETE, DID_BUS_BUSY);
else
/* ARBITRATION won, but SELECTION failed */
- done(shpnt, DID_NO_CONNECT << 16);
+ done(shpnt, SAM_STAT_GOOD,
+ COMMAND_COMPLETE, DID_NO_CONNECT);
}
/*
@@ -1891,7 +1903,8 @@ static void cmd_init(struct Scsi_Host *shpnt)
if (CURRENT_SC->SCp.sent_command) {
scmd_printk(KERN_ERR, CURRENT_SC,
"command already sent\n");
- done(shpnt, DID_ERROR << 16);
+ done(shpnt, SAM_STAT_GOOD,
+ COMMAND_COMPLETE, DID_ERROR);
return;
}
@@ -2231,7 +2244,8 @@ static int update_state(struct Scsi_Host *shpnt)
static void parerr_run(struct Scsi_Host *shpnt)
{
scmd_printk(KERN_ERR, CURRENT_SC, "parity error\n");
- done(shpnt, DID_PARITY << 16);
+ done(shpnt, SAM_STAT_GOOD,
+ COMMAND_COMPLETE, DID_PARITY);
}
/*
@@ -2262,7 +2276,8 @@ static void rsti_run(struct Scsi_Host *shpnt)
}
if(CURRENT_SC && !CURRENT_SC->device->soft_reset)
- done(shpnt, DID_RESET << 16 );
+ done(shpnt, SAM_STAT_GOOD,
+ COMMAND_COMPLETE, DID_RESET);
}
--
2.29.2
next prev parent reply other threads:[~2021-04-21 17:48 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-21 17:47 [RFC PATCH 00/42] SCSI result cleanup, part 2 Hannes Reinecke
2021-04-21 17:47 ` [PATCH 01/42] st: return error code in st_scsi_execute() Hannes Reinecke
2021-04-21 20:56 ` Bart Van Assche
2021-04-21 17:47 ` [PATCH 02/42] scsi_ioctl: return error code when blk_rq_map_kern() fails Hannes Reinecke
2021-04-21 21:01 ` Bart Van Assche
2021-04-22 6:29 ` Hannes Reinecke
2021-04-21 17:47 ` [PATCH 03/42] scsi_dh_alua: do not interpret DRIVER_ERROR Hannes Reinecke
2021-04-21 17:47 ` [PATCH 04/42] scsi: Fixup calling convention for scsi_mode_sense() Hannes Reinecke
2021-04-21 17:47 ` [PATCH 05/42] scsi: stop using DRIVER_ERROR Hannes Reinecke
2021-04-21 21:30 ` Bart Van Assche
2021-04-22 8:39 ` Hannes Reinecke
2021-04-21 17:47 ` [PATCH 06/42] scsi: introduce scsi_build_sense() Hannes Reinecke
2021-04-21 17:47 ` [PATCH 07/42] scsi: Kill DRIVER_SENSE Hannes Reinecke
2021-04-21 19:46 ` Douglas Gilbert
2021-04-21 20:07 ` Hannes Reinecke
2021-04-21 21:06 ` Bart Van Assche
2021-04-22 6:31 ` Hannes Reinecke
2021-04-22 15:46 ` Douglas Gilbert
2021-04-21 17:47 ` [PATCH 08/42] scsi: do not use DRIVER_INVALID Hannes Reinecke
2021-04-21 17:47 ` [PATCH 09/42] scsi_error: use DID_TIME_OUT instead of DRIVER_TIMEOUT Hannes Reinecke
2021-04-21 17:47 ` [PATCH 10/42] xen-scsiback: use DID_ERROR instead of DRIVER_ERROR Hannes Reinecke
2021-04-21 17:47 ` [PATCH 11/42] xen-scsifront: compability status handling Hannes Reinecke
2021-04-21 17:47 ` [PATCH 12/42] scsi: Drop the now obsolete driver_byte definitions Hannes Reinecke
2021-04-21 17:47 ` [PATCH 13/42] scsi: add get_{status,host}_byte() accessor function Hannes Reinecke
2021-04-21 21:09 ` Bart Van Assche
2021-04-22 6:33 ` Hannes Reinecke
2021-04-21 17:47 ` [PATCH 14/42] scsi: add scsi_result_is_good() Hannes Reinecke
2021-04-21 21:10 ` Bart Van Assche
2021-04-21 21:58 ` Douglas Gilbert
2021-04-22 8:42 ` Hannes Reinecke
2021-04-22 9:36 ` Finn Thain
2021-04-22 15:56 ` Douglas Gilbert
2021-04-22 16:51 ` Douglas Gilbert
2021-04-22 16:52 ` Bart Van Assche
2021-04-22 17:33 ` Douglas Gilbert
2021-04-26 8:45 ` Hannes Reinecke
2021-04-22 6:34 ` Hannes Reinecke
2021-04-21 17:47 ` [PATCH 15/42] NCR5380: use SCSI result accessors Hannes Reinecke
2021-04-21 21:11 ` Bart Van Assche
2021-04-22 6:37 ` Hannes Reinecke
2021-04-22 16:10 ` Bart Van Assche
2021-04-26 8:30 ` Hannes Reinecke
2021-04-22 9:36 ` Finn Thain
2021-04-21 17:47 ` [PATCH 16/42] NCR5380: Fold SCSI message ABORT onto DID_ABORT Hannes Reinecke
2021-04-22 9:35 ` Finn Thain
2021-04-21 17:47 ` [PATCH 17/42] scsi: add translate_msg_byte() Hannes Reinecke
2021-04-21 17:47 ` [PATCH 18/42] dc395: use standard macros to set SCSI result Hannes Reinecke
2021-04-21 22:26 ` Bart Van Assche
2021-04-22 8:52 ` Hannes Reinecke
2021-04-22 16:12 ` Bart Van Assche
2021-04-21 17:47 ` [PATCH 19/42] dc395: translate message bytes Hannes Reinecke
2021-04-21 17:47 ` [PATCH 20/42] qlogicfas408: make ql_pcmd() a void function Hannes Reinecke
2021-04-21 17:47 ` [PATCH 21/42] qlogicfas408: whitespace cleanup Hannes Reinecke
2021-04-21 17:47 ` [PATCH 22/42] qlogicfas408: translate message to host byte status Hannes Reinecke
2021-04-21 17:47 ` [PATCH 23/42] nsp32: use standard macros to set SCSI result Hannes Reinecke
2021-04-21 17:47 ` [PATCH 24/42] nsp32: whitespace cleanup Hannes Reinecke
2021-04-21 17:47 ` [PATCH 25/42] nsp32: do not set message byte Hannes Reinecke
2021-04-21 17:47 ` [PATCH 26/42] wd33c93: use standard macros to set SCSI result Hannes Reinecke
2021-04-21 17:47 ` [PATCH 27/42] wd33c93: translate message byte to host byte Hannes Reinecke
2021-04-21 17:47 ` [PATCH 28/42] mesh: use standard macros to set SCSI result Hannes Reinecke
2021-04-21 17:47 ` [PATCH 29/42] mesh: translate message to host byte status Hannes Reinecke
2021-04-21 17:47 ` [PATCH 30/42] acornscsi: use standard macros to set SCSI result Hannes Reinecke
2021-04-21 17:47 ` [PATCH 31/42] acornscsi: remove acornscsi_reportstatus() Hannes Reinecke
2021-04-21 17:47 ` [PATCH 32/42] acornscsi: translate message byte to host byte Hannes Reinecke
2021-04-21 17:47 ` Hannes Reinecke [this message]
2021-04-21 17:47 ` [PATCH 34/42] aha152x: do not set message byte when calling scsi_done() Hannes Reinecke
2021-04-21 17:47 ` [PATCH 35/42] advansys: do not set message byte in SCSI status Hannes Reinecke
2021-04-21 17:47 ` [PATCH 36/42] advansys: use SCSI result accessors Hannes Reinecke
2021-04-21 17:47 ` [PATCH 37/42] fas216: translate message to host byte status Hannes Reinecke
2021-04-21 17:47 ` [PATCH 38/42] fas216: convert to SCSI Accessors Hannes Reinecke
2021-04-21 17:47 ` [PATCH 39/42] fdomain: drop last argument to fdomain_finish_cmd() Hannes Reinecke
2021-04-21 17:47 ` [PATCH 40/42] fdomain: translate message to host byte status Hannes Reinecke
2021-04-21 17:47 ` [PATCH 41/42] scsi: drop message byte helper Hannes Reinecke
2021-04-21 21:14 ` Bart Van Assche
2021-04-22 6:37 ` Hannes Reinecke
2021-04-21 17:47 ` [PATCH 42/42] scsi: kill message byte Hannes Reinecke
2021-04-21 20:54 ` [RFC PATCH 00/42] SCSI result cleanup, part 2 Bart Van Assche
2021-04-21 22:26 ` Bart Van Assche
2021-04-22 8:49 ` Hannes Reinecke
2021-04-22 16:28 ` Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210421174749.11221-34-hare@suse.de \
--to=hare@suse.de \
--cc=bvanassche@acm.org \
--cc=hch@lst.de \
--cc=james.bottomley@hansenpartnership.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox