From: Hannes Reinecke <hare@suse.de>
To: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>,
James Bottomley <james.bottomley@hansenpartnership.com>,
Bart van Assche <bvanassche@acm.org>,
linux-scsi@vger.kernel.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCH 39/42] fdomain: drop last argument to fdomain_finish_cmd()
Date: Wed, 21 Apr 2021 19:47:46 +0200 [thread overview]
Message-ID: <20210421174749.11221-40-hare@suse.de> (raw)
In-Reply-To: <20210421174749.11221-1-hare@suse.de>
Set the SCSI host status before calling fdomein_finish_cmd(),
and drop the last argument to that function.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/fdomain.c | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c
index 772bdc93930a..294dbfa5c761 100644
--- a/drivers/scsi/fdomain.c
+++ b/drivers/scsi/fdomain.c
@@ -202,11 +202,10 @@ static int fdomain_select(struct Scsi_Host *sh, int target)
return 1;
}
-static void fdomain_finish_cmd(struct fdomain *fd, int result)
+static void fdomain_finish_cmd(struct fdomain *fd)
{
outb(0, fd->base + REG_ICTL);
fdomain_make_bus_idle(fd);
- fd->cur_cmd->result = result;
fd->cur_cmd->scsi_done(fd->cur_cmd);
fd->cur_cmd = NULL;
}
@@ -273,7 +272,8 @@ static void fdomain_work(struct work_struct *work)
if (cmd->SCp.phase & in_arbitration) {
status = inb(fd->base + REG_ASTAT);
if (!(status & ASTAT_ARB)) {
- fdomain_finish_cmd(fd, DID_BUS_BUSY << 16);
+ set_host_byte(cmd, DID_BUS_BUSY);
+ fdomain_finish_cmd(fd);
goto out;
}
cmd->SCp.phase = in_selection;
@@ -290,7 +290,8 @@ static void fdomain_work(struct work_struct *work)
if (!(status & BSTAT_BSY)) {
/* Try again, for slow devices */
if (fdomain_select(cmd->device->host, scmd_id(cmd))) {
- fdomain_finish_cmd(fd, DID_NO_CONNECT << 16);
+ set_host_byte(cmd, DID_NO_CONNECT);
+ fdomain_finish_cmd(fd);
goto out;
}
/* Stop arbitration and enable parity */
@@ -333,7 +334,7 @@ static void fdomain_work(struct work_struct *work)
break;
case BSTAT_MSG | BSTAT_CMD | BSTAT_IO: /* MESSAGE IN */
cmd->SCp.Message = inb(fd->base + REG_SCSI_DATA);
- if (!cmd->SCp.Message)
+ if (cmd->SCp.Message == COMMAND_COMPLETE)
++done;
break;
}
@@ -359,9 +360,10 @@ static void fdomain_work(struct work_struct *work)
fdomain_read_data(cmd);
if (done) {
- fdomain_finish_cmd(fd, (cmd->SCp.Status & 0xff) |
- ((cmd->SCp.Message & 0xff) << 8) |
- (DID_OK << 16));
+ set_status_byte(cmd, cmd->SCp.Status);
+ set_msg_byte(cmd, cmd->SCp.Message);
+ set_host_byte(cmd, DID_OK);
+ fdomain_finish_cmd(fd);
} else {
if (cmd->SCp.phase & disconnect) {
outb(ICTL_FIFO | ICTL_SEL | ICTL_REQ | FIFO_COUNT,
@@ -439,10 +441,10 @@ static int fdomain_abort(struct scsi_cmnd *cmd)
fdomain_make_bus_idle(fd);
fd->cur_cmd->SCp.phase |= aborted;
- fd->cur_cmd->result = DID_ABORT << 16;
/* Aborts are not done well. . . */
- fdomain_finish_cmd(fd, DID_ABORT << 16);
+ set_host_byte(fd->cur_cmd, DID_ABORT);
+ fdomain_finish_cmd(fd);
spin_unlock_irqrestore(sh->host_lock, flags);
return SUCCESS;
}
--
2.29.2
next prev parent reply other threads:[~2021-04-21 17:49 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-21 17:47 [RFC PATCH 00/42] SCSI result cleanup, part 2 Hannes Reinecke
2021-04-21 17:47 ` [PATCH 01/42] st: return error code in st_scsi_execute() Hannes Reinecke
2021-04-21 20:56 ` Bart Van Assche
2021-04-21 17:47 ` [PATCH 02/42] scsi_ioctl: return error code when blk_rq_map_kern() fails Hannes Reinecke
2021-04-21 21:01 ` Bart Van Assche
2021-04-22 6:29 ` Hannes Reinecke
2021-04-21 17:47 ` [PATCH 03/42] scsi_dh_alua: do not interpret DRIVER_ERROR Hannes Reinecke
2021-04-21 17:47 ` [PATCH 04/42] scsi: Fixup calling convention for scsi_mode_sense() Hannes Reinecke
2021-04-21 17:47 ` [PATCH 05/42] scsi: stop using DRIVER_ERROR Hannes Reinecke
2021-04-21 21:30 ` Bart Van Assche
2021-04-22 8:39 ` Hannes Reinecke
2021-04-21 17:47 ` [PATCH 06/42] scsi: introduce scsi_build_sense() Hannes Reinecke
2021-04-21 17:47 ` [PATCH 07/42] scsi: Kill DRIVER_SENSE Hannes Reinecke
2021-04-21 19:46 ` Douglas Gilbert
2021-04-21 20:07 ` Hannes Reinecke
2021-04-21 21:06 ` Bart Van Assche
2021-04-22 6:31 ` Hannes Reinecke
2021-04-22 15:46 ` Douglas Gilbert
2021-04-21 17:47 ` [PATCH 08/42] scsi: do not use DRIVER_INVALID Hannes Reinecke
2021-04-21 17:47 ` [PATCH 09/42] scsi_error: use DID_TIME_OUT instead of DRIVER_TIMEOUT Hannes Reinecke
2021-04-21 17:47 ` [PATCH 10/42] xen-scsiback: use DID_ERROR instead of DRIVER_ERROR Hannes Reinecke
2021-04-21 17:47 ` [PATCH 11/42] xen-scsifront: compability status handling Hannes Reinecke
2021-04-21 17:47 ` [PATCH 12/42] scsi: Drop the now obsolete driver_byte definitions Hannes Reinecke
2021-04-21 17:47 ` [PATCH 13/42] scsi: add get_{status,host}_byte() accessor function Hannes Reinecke
2021-04-21 21:09 ` Bart Van Assche
2021-04-22 6:33 ` Hannes Reinecke
2021-04-21 17:47 ` [PATCH 14/42] scsi: add scsi_result_is_good() Hannes Reinecke
2021-04-21 21:10 ` Bart Van Assche
2021-04-21 21:58 ` Douglas Gilbert
2021-04-22 8:42 ` Hannes Reinecke
2021-04-22 9:36 ` Finn Thain
2021-04-22 15:56 ` Douglas Gilbert
2021-04-22 16:51 ` Douglas Gilbert
2021-04-22 16:52 ` Bart Van Assche
2021-04-22 17:33 ` Douglas Gilbert
2021-04-26 8:45 ` Hannes Reinecke
2021-04-22 6:34 ` Hannes Reinecke
2021-04-21 17:47 ` [PATCH 15/42] NCR5380: use SCSI result accessors Hannes Reinecke
2021-04-21 21:11 ` Bart Van Assche
2021-04-22 6:37 ` Hannes Reinecke
2021-04-22 16:10 ` Bart Van Assche
2021-04-26 8:30 ` Hannes Reinecke
2021-04-22 9:36 ` Finn Thain
2021-04-21 17:47 ` [PATCH 16/42] NCR5380: Fold SCSI message ABORT onto DID_ABORT Hannes Reinecke
2021-04-22 9:35 ` Finn Thain
2021-04-21 17:47 ` [PATCH 17/42] scsi: add translate_msg_byte() Hannes Reinecke
2021-04-21 17:47 ` [PATCH 18/42] dc395: use standard macros to set SCSI result Hannes Reinecke
2021-04-21 22:26 ` Bart Van Assche
2021-04-22 8:52 ` Hannes Reinecke
2021-04-22 16:12 ` Bart Van Assche
2021-04-21 17:47 ` [PATCH 19/42] dc395: translate message bytes Hannes Reinecke
2021-04-21 17:47 ` [PATCH 20/42] qlogicfas408: make ql_pcmd() a void function Hannes Reinecke
2021-04-21 17:47 ` [PATCH 21/42] qlogicfas408: whitespace cleanup Hannes Reinecke
2021-04-21 17:47 ` [PATCH 22/42] qlogicfas408: translate message to host byte status Hannes Reinecke
2021-04-21 17:47 ` [PATCH 23/42] nsp32: use standard macros to set SCSI result Hannes Reinecke
2021-04-21 17:47 ` [PATCH 24/42] nsp32: whitespace cleanup Hannes Reinecke
2021-04-21 17:47 ` [PATCH 25/42] nsp32: do not set message byte Hannes Reinecke
2021-04-21 17:47 ` [PATCH 26/42] wd33c93: use standard macros to set SCSI result Hannes Reinecke
2021-04-21 17:47 ` [PATCH 27/42] wd33c93: translate message byte to host byte Hannes Reinecke
2021-04-21 17:47 ` [PATCH 28/42] mesh: use standard macros to set SCSI result Hannes Reinecke
2021-04-21 17:47 ` [PATCH 29/42] mesh: translate message to host byte status Hannes Reinecke
2021-04-21 17:47 ` [PATCH 30/42] acornscsi: use standard macros to set SCSI result Hannes Reinecke
2021-04-21 17:47 ` [PATCH 31/42] acornscsi: remove acornscsi_reportstatus() Hannes Reinecke
2021-04-21 17:47 ` [PATCH 32/42] acornscsi: translate message byte to host byte Hannes Reinecke
2021-04-21 17:47 ` [PATCH 33/42] aha152x: modify done() to use separate status bytes Hannes Reinecke
2021-04-21 17:47 ` [PATCH 34/42] aha152x: do not set message byte when calling scsi_done() Hannes Reinecke
2021-04-21 17:47 ` [PATCH 35/42] advansys: do not set message byte in SCSI status Hannes Reinecke
2021-04-21 17:47 ` [PATCH 36/42] advansys: use SCSI result accessors Hannes Reinecke
2021-04-21 17:47 ` [PATCH 37/42] fas216: translate message to host byte status Hannes Reinecke
2021-04-21 17:47 ` [PATCH 38/42] fas216: convert to SCSI Accessors Hannes Reinecke
2021-04-21 17:47 ` Hannes Reinecke [this message]
2021-04-21 17:47 ` [PATCH 40/42] fdomain: translate message to host byte status Hannes Reinecke
2021-04-21 17:47 ` [PATCH 41/42] scsi: drop message byte helper Hannes Reinecke
2021-04-21 21:14 ` Bart Van Assche
2021-04-22 6:37 ` Hannes Reinecke
2021-04-21 17:47 ` [PATCH 42/42] scsi: kill message byte Hannes Reinecke
2021-04-21 20:54 ` [RFC PATCH 00/42] SCSI result cleanup, part 2 Bart Van Assche
2021-04-21 22:26 ` Bart Van Assche
2021-04-22 8:49 ` Hannes Reinecke
2021-04-22 16:28 ` Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210421174749.11221-40-hare@suse.de \
--to=hare@suse.de \
--cc=bvanassche@acm.org \
--cc=hch@lst.de \
--cc=james.bottomley@hansenpartnership.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox