From: Hannes Reinecke <hare@suse.de>
To: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>,
James Bottomley <james.bottomley@hansenpartnership.com>,
linux-scsi@vger.kernel.org, Bart van Assche <bvanassche@acm.org>,
Hannes Reinecke <hare@suse.de>
Subject: [PATCH 34/39] fdomain: drop last argument to fdomain_finish_cmd()
Date: Fri, 23 Apr 2021 13:39:39 +0200 [thread overview]
Message-ID: <20210423113944.42672-35-hare@suse.de> (raw)
In-Reply-To: <20210423113944.42672-1-hare@suse.de>
Set the SCSI host status before calling fdomein_finish_cmd(),
and drop the last argument to that function.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/fdomain.c | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c
index 772bdc93930a..294dbfa5c761 100644
--- a/drivers/scsi/fdomain.c
+++ b/drivers/scsi/fdomain.c
@@ -202,11 +202,10 @@ static int fdomain_select(struct Scsi_Host *sh, int target)
return 1;
}
-static void fdomain_finish_cmd(struct fdomain *fd, int result)
+static void fdomain_finish_cmd(struct fdomain *fd)
{
outb(0, fd->base + REG_ICTL);
fdomain_make_bus_idle(fd);
- fd->cur_cmd->result = result;
fd->cur_cmd->scsi_done(fd->cur_cmd);
fd->cur_cmd = NULL;
}
@@ -273,7 +272,8 @@ static void fdomain_work(struct work_struct *work)
if (cmd->SCp.phase & in_arbitration) {
status = inb(fd->base + REG_ASTAT);
if (!(status & ASTAT_ARB)) {
- fdomain_finish_cmd(fd, DID_BUS_BUSY << 16);
+ set_host_byte(cmd, DID_BUS_BUSY);
+ fdomain_finish_cmd(fd);
goto out;
}
cmd->SCp.phase = in_selection;
@@ -290,7 +290,8 @@ static void fdomain_work(struct work_struct *work)
if (!(status & BSTAT_BSY)) {
/* Try again, for slow devices */
if (fdomain_select(cmd->device->host, scmd_id(cmd))) {
- fdomain_finish_cmd(fd, DID_NO_CONNECT << 16);
+ set_host_byte(cmd, DID_NO_CONNECT);
+ fdomain_finish_cmd(fd);
goto out;
}
/* Stop arbitration and enable parity */
@@ -333,7 +334,7 @@ static void fdomain_work(struct work_struct *work)
break;
case BSTAT_MSG | BSTAT_CMD | BSTAT_IO: /* MESSAGE IN */
cmd->SCp.Message = inb(fd->base + REG_SCSI_DATA);
- if (!cmd->SCp.Message)
+ if (cmd->SCp.Message == COMMAND_COMPLETE)
++done;
break;
}
@@ -359,9 +360,10 @@ static void fdomain_work(struct work_struct *work)
fdomain_read_data(cmd);
if (done) {
- fdomain_finish_cmd(fd, (cmd->SCp.Status & 0xff) |
- ((cmd->SCp.Message & 0xff) << 8) |
- (DID_OK << 16));
+ set_status_byte(cmd, cmd->SCp.Status);
+ set_msg_byte(cmd, cmd->SCp.Message);
+ set_host_byte(cmd, DID_OK);
+ fdomain_finish_cmd(fd);
} else {
if (cmd->SCp.phase & disconnect) {
outb(ICTL_FIFO | ICTL_SEL | ICTL_REQ | FIFO_COUNT,
@@ -439,10 +441,10 @@ static int fdomain_abort(struct scsi_cmnd *cmd)
fdomain_make_bus_idle(fd);
fd->cur_cmd->SCp.phase |= aborted;
- fd->cur_cmd->result = DID_ABORT << 16;
/* Aborts are not done well. . . */
- fdomain_finish_cmd(fd, DID_ABORT << 16);
+ set_host_byte(fd->cur_cmd, DID_ABORT);
+ fdomain_finish_cmd(fd);
spin_unlock_irqrestore(sh->host_lock, flags);
return SUCCESS;
}
--
2.29.2
next prev parent reply other threads:[~2021-04-23 11:40 UTC|newest]
Thread overview: 93+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-23 11:39 [RFC PATCHv2 00/39] SCSI result cleanup, part 2 Hannes Reinecke
2021-04-23 11:39 ` [PATCH 01/39] st: return error code in st_scsi_execute() Hannes Reinecke
2021-04-26 3:19 ` Bart Van Assche
2021-04-26 14:51 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 02/39] scsi_ioctl: return error code when blk_rq_map_kern() fails Hannes Reinecke
2021-04-26 3:20 ` Bart Van Assche
2021-04-26 14:51 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 03/39] scsi_dh_alua: do not interpret DRIVER_ERROR Hannes Reinecke
2021-04-26 14:54 ` Christoph Hellwig
2021-04-26 15:17 ` Hannes Reinecke
2021-04-23 11:39 ` [PATCH 04/39] scsi: Fixup calling convention for scsi_mode_sense() Hannes Reinecke
2021-04-26 3:21 ` Bart Van Assche
2021-04-26 14:57 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 05/39] scsi: stop using DRIVER_ERROR Hannes Reinecke
2021-04-26 3:26 ` Bart Van Assche
2021-04-26 15:01 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 06/39] scsi: introduce scsi_build_sense() Hannes Reinecke
2021-04-26 3:31 ` Bart Van Assche
2021-04-26 15:02 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 07/39] scsi: introduce scsi_status_is_check_condition() Hannes Reinecke
2021-04-26 3:34 ` Bart Van Assche
2021-04-26 6:58 ` Hannes Reinecke
2021-04-26 15:02 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 08/39] scsi: Kill DRIVER_SENSE Hannes Reinecke
2021-04-26 3:41 ` Bart Van Assche
2021-04-26 7:02 ` Hannes Reinecke
2021-04-26 15:20 ` Christoph Hellwig
2021-04-27 7:15 ` Hannes Reinecke
2021-04-23 11:39 ` [PATCH 09/39] scsi: do not use DRIVER_INVALID Hannes Reinecke
2021-04-26 3:42 ` Bart Van Assche
2021-04-26 15:20 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 10/39] scsi_error: use DID_TIME_OUT instead of DRIVER_TIMEOUT Hannes Reinecke
2021-04-26 3:42 ` Bart Van Assche
2021-04-26 15:21 ` Christoph Hellwig
2021-04-26 15:38 ` Hannes Reinecke
2021-04-23 11:39 ` [PATCH 11/39] xen-scsiback: use DID_ERROR instead of DRIVER_ERROR Hannes Reinecke
2021-04-26 3:43 ` Bart Van Assche
2021-04-26 15:22 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 12/39] xen-scsifront: compability status handling Hannes Reinecke
2021-04-26 3:44 ` Bart Van Assche
2021-04-26 7:03 ` Hannes Reinecke
2021-04-23 11:39 ` [PATCH 13/39] scsi: Drop the now obsolete driver_byte definitions Hannes Reinecke
2021-04-26 3:46 ` Bart Van Assche
2021-04-26 15:22 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 14/39] NCR5380: Fold SCSI message ABORT onto DID_ABORT Hannes Reinecke
2021-04-26 15:23 ` Christoph Hellwig
2021-04-26 15:43 ` Hannes Reinecke
2021-04-23 11:39 ` [PATCH 15/39] scsi: add get_{status,host}_byte() accessor function Hannes Reinecke
2021-04-26 3:47 ` Bart Van Assche
2021-04-26 7:05 ` Hannes Reinecke
2021-04-26 15:23 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 16/39] scsi: add translate_msg_byte() Hannes Reinecke
2021-04-26 3:48 ` Bart Van Assche
2021-04-26 15:24 ` Christoph Hellwig
2021-04-26 15:43 ` Hannes Reinecke
2021-04-23 11:39 ` [PATCH 17/39] dc395: use standard macros to set SCSI result Hannes Reinecke
2021-04-26 15:25 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 18/39] dc395: translate message bytes Hannes Reinecke
2021-04-26 15:25 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 19/39] qlogicfas408: make ql_pcmd() a void function Hannes Reinecke
2021-04-26 15:26 ` Christoph Hellwig
2021-04-26 15:45 ` Hannes Reinecke
2021-04-27 7:36 ` Hannes Reinecke
2021-04-23 11:39 ` [PATCH 20/39] qlogicfas408: whitespace cleanup Hannes Reinecke
2021-04-23 11:39 ` [PATCH 21/39] qlogicfas408: translate message to host byte status Hannes Reinecke
2021-04-23 11:39 ` [PATCH 22/39] nsp32: whitespace cleanup Hannes Reinecke
2021-04-23 11:39 ` [PATCH 23/39] nsp32: do not set message byte Hannes Reinecke
2021-04-23 11:39 ` [PATCH 24/39] wd33c93: translate message byte to host byte Hannes Reinecke
2021-04-24 9:20 ` Finn Thain
2021-04-26 9:07 ` Hannes Reinecke
2021-04-27 4:39 ` Finn Thain
2021-04-27 6:11 ` Hannes Reinecke
2021-04-23 11:39 ` [PATCH 25/39] mesh: translate message to host byte status Hannes Reinecke
2021-04-23 11:39 ` [PATCH 26/39] acornscsi: remove acornscsi_reportstatus() Hannes Reinecke
2021-04-26 15:32 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 27/39] acornscsi: translate message byte to host byte Hannes Reinecke
2021-04-23 11:39 ` [PATCH 28/39] aha152x: modify done() to use separate status bytes Hannes Reinecke
2021-04-23 11:39 ` [PATCH 29/39] aha152x: do not set message byte when calling scsi_done() Hannes Reinecke
2021-04-23 11:39 ` [PATCH 30/39] advansys: do not set message byte in SCSI status Hannes Reinecke
2021-04-23 11:39 ` [PATCH 31/39] fas216: translate message to host byte status Hannes Reinecke
2021-04-23 11:39 ` [PATCH 32/39] fas216: Use get_status_byte() to avoid using linux-specific status codes Hannes Reinecke
2021-04-23 11:39 ` [PATCH 33/39] FlashPoint: Use standard SCSI definitions Hannes Reinecke
2021-04-23 11:39 ` Hannes Reinecke [this message]
2021-04-23 11:39 ` [PATCH 35/39] fdomain: translate message to host byte status Hannes Reinecke
2021-04-24 9:21 ` Finn Thain
2021-04-23 11:39 ` [PATCH 36/39] scsi: drop message byte helper Hannes Reinecke
2021-04-26 3:48 ` Bart Van Assche
2021-04-23 11:39 ` [PATCH 37/39] scsi: kill message byte Hannes Reinecke
2021-04-26 3:50 ` Bart Van Assche
2021-04-23 11:39 ` [PATCH 38/39] target: use standard SAM status types Hannes Reinecke
2021-04-26 3:51 ` Bart Van Assche
2021-04-23 11:39 ` [PATCH 39/39] scsi: drop obsolete linux-specific SCSI status codes Hannes Reinecke
2021-04-26 3:55 ` Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210423113944.42672-35-hare@suse.de \
--to=hare@suse.de \
--cc=bvanassche@acm.org \
--cc=hch@lst.de \
--cc=james.bottomley@hansenpartnership.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox