From: Hannes Reinecke <hare@suse.de>
To: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>,
James Bottomley <james.bottomley@hansenpartnership.com>,
Bart van Assche <bvanassche@acm.org>,
linux-scsi@vger.kernel.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCH 20/40] qlogicfas408: make ql_pcmd() a void function
Date: Tue, 27 Apr 2021 10:30:26 +0200 [thread overview]
Message-ID: <20210427083046.31620-21-hare@suse.de> (raw)
In-Reply-To: <20210427083046.31620-1-hare@suse.de>
Make ql_pcmd() a void function and set the SCSI result directly.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/qlogicfas408.c | 75 ++++++++++++++++++++++++-------------
1 file changed, 49 insertions(+), 26 deletions(-)
diff --git a/drivers/scsi/qlogicfas408.c b/drivers/scsi/qlogicfas408.c
index 136681ad18a5..a1eabdc7db09 100644
--- a/drivers/scsi/qlogicfas408.c
+++ b/drivers/scsi/qlogicfas408.c
@@ -256,7 +256,7 @@ static void ql_icmd(struct scsi_cmnd *cmd)
* Process scsi command - usually after interrupt
*/
-static unsigned int ql_pcmd(struct scsi_cmnd *cmd)
+static void ql_pcmd(struct scsi_cmnd *cmd)
{
unsigned int i, j;
unsigned long k;
@@ -274,13 +274,15 @@ static unsigned int ql_pcmd(struct scsi_cmnd *cmd)
j = inb(qbase + 6);
i = inb(qbase + 5);
if (i == 0x20) {
- return (DID_NO_CONNECT << 16);
+ set_host_byte(cmd, DID_NO_CONNECT);
+ return;
}
i |= inb(qbase + 5); /* the 0x10 bit can be set after the 0x08 */
if (i != 0x18) {
printk(KERN_ERR "Ql:Bad Interrupt status:%02x\n", i);
ql_zap(priv);
- return (DID_BAD_INTR << 16);
+ set_host_byte(cmd, DID_BAD_INTR);
+ return;
}
j &= 7; /* j = inb( qbase + 7 ) >> 5; */
@@ -293,9 +295,10 @@ static unsigned int ql_pcmd(struct scsi_cmnd *cmd)
printk(KERN_ERR "Ql:Bad sequence for command %d, int %02X, cmdleft = %d\n",
j, i, inb(qbase + 7) & 0x1f);
ql_zap(priv);
- return (DID_ERROR << 16);
+ set_host_byte (cmd, DID_ERROR);
+ return;
}
- result = DID_OK;
+
if (inb(qbase + 7) & 0x1f) /* if some bytes in fifo */
outb(1, qbase + 3); /* clear fifo */
/* note that request_bufflen is the total xfer size when sg is used */
@@ -314,21 +317,24 @@ static unsigned int ql_pcmd(struct scsi_cmnd *cmd)
scsi_for_each_sg(cmd, sg, scsi_sg_count(cmd), i) {
if (priv->qabort) {
REG0;
- return ((priv->qabort == 1 ?
- DID_ABORT : DID_RESET) << 16);
+ set_host_byte(cmd,
+ priv->qabort == 1 ?
+ DID_ABORT : DID_RESET);
}
buf = sg_virt(sg);
if (ql_pdma(priv, phase, buf, sg->length))
break;
}
REG0;
- rtrc(2)
+ rtrc(2);
/*
* Wait for irq (split into second state of irq handler
* if this can take time)
*/
- if ((k = ql_wai(priv)))
- return (k << 16);
+ if ((k = ql_wai(priv))) {
+ set_host_byte(cmd, k);
+ return;
+ }
k = inb(qbase + 5); /* should be 0x10, bus service */
}
@@ -344,19 +350,25 @@ static unsigned int ql_pcmd(struct scsi_cmnd *cmd)
if (time_after_eq(jiffies, k)) {
ql_zap(priv);
- return (DID_TIME_OUT << 16);
+ set_host_byte(cmd, DID_TIME_OUT);
+ return;
}
/* FIXME: timeout ?? */
while (inb(qbase + 5))
cpu_relax(); /* clear pending ints */
- if (priv->qabort)
- return ((priv->qabort == 1 ? DID_ABORT : DID_RESET) << 16);
+ if (priv->qabort) {
+ set_host_byte(cmd,
+ priv->qabort == 1 ? DID_ABORT : DID_RESET);
+ return;
+ }
outb(0x11, qbase + 3); /* get status and message */
- if ((k = ql_wai(priv)))
- return (k << 16);
+ if ((k = ql_wai(priv))) {
+ set_host_byte(cmd, k);
+ return;
+ }
i = inb(qbase + 5); /* get chip irq stat */
j = inb(qbase + 7) & 0x1f; /* and bytes rec'd */
status = inb(qbase + 2);
@@ -368,12 +380,14 @@ static unsigned int ql_pcmd(struct scsi_cmnd *cmd)
*/
if (!((i == 8 && j == 2) || (i == 0x10 && j == 1))) {
printk(KERN_ERR "Ql:Error during status phase, int=%02X, %d bytes recd\n", i, j);
- result = DID_ERROR;
+ set_host_byte(cmd, DID_ERROR);
}
outb(0x12, qbase + 3); /* done, disconnect */
- rtrc(1)
- if ((k = ql_wai(priv)))
- return (k << 16);
+ rtrc(1);
+ if ((k = ql_wai(priv))) {
+ set_host_byte(cmd, k);
+ return;
+ }
/*
* Should get bus service interrupt and disconnect interrupt
@@ -385,12 +399,18 @@ static unsigned int ql_pcmd(struct scsi_cmnd *cmd)
cpu_relax();
i |= inb(qbase + 5);
}
- rtrc(0)
+ rtrc(0);
- if (priv->qabort)
- return ((priv->qabort == 1 ? DID_ABORT : DID_RESET) << 16);
-
- return (result << 16) | (message << 8) | (status & STATUS_MASK);
+ if (priv->qabort) {
+ set_host_byte(cmd,
+ priv->qabort == 1 ? DID_ABORT : DID_RESET);
+ return;
+ }
+
+ set_host_byte(cmd, result);
+ set_msg_byte(cmd, message);
+ set_status_byte(cmd, status);
+ return;
}
/*
@@ -415,7 +435,7 @@ static void ql_ihandl(void *dev_id)
return;
}
icmd = priv->qlcmd;
- icmd->result = ql_pcmd(icmd);
+ ql_pcmd(icmd);
priv->qlcmd = NULL;
/*
* If result is CHECK CONDITION done calls qcommand to request
@@ -443,8 +463,11 @@ static int qlogicfas408_queuecommand_lck(struct scsi_cmnd *cmd,
void (*done) (struct scsi_cmnd *))
{
struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
+
+ set_host_byte(cmd, DID_OK);
+ set_status_byte(cmd, SAM_STAT_GOOD);
if (scmd_id(cmd) == priv->qinitid) {
- cmd->result = DID_BAD_TARGET << 16;
+ set_host_byte(cmd, DID_BAD_TARGET);
done(cmd);
return 0;
}
--
2.29.2
next prev parent reply other threads:[~2021-04-27 8:31 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-27 8:30 [PATCHv3 00/40] SCSI result cleanup, part 2 Hannes Reinecke
2021-04-27 8:30 ` [PATCH 01/40] st: return error code in st_scsi_execute() Hannes Reinecke
2021-04-27 12:11 ` "Kai Mäkisara (Kolumbus)"
2021-04-27 8:30 ` [PATCH 02/40] scsi_ioctl: return error code when blk_rq_map_kern() fails Hannes Reinecke
2021-04-27 8:30 ` [PATCH 03/40] scsi: Fixup calling convention for scsi_mode_sense() Hannes Reinecke
2021-04-27 8:30 ` [PATCH 04/40] scsi: reshuffle response handling in scsi_mode_sense() Hannes Reinecke
2021-04-27 8:30 ` [PATCH 05/40] scsi_dh_alua: check for negative result value Hannes Reinecke
2021-04-27 8:30 ` [PATCH 06/40] scsi: stop using DRIVER_ERROR Hannes Reinecke
2021-04-27 8:30 ` [PATCH 07/40] scsi: introduce scsi_build_sense() Hannes Reinecke
2021-04-27 8:30 ` [PATCH 08/40] scsi: introduce scsi_status_is_check_condition() Hannes Reinecke
2021-04-27 8:30 ` [PATCH 09/40] scsi: Kill DRIVER_SENSE Hannes Reinecke
2021-04-27 8:30 ` [PATCH 10/40] scsi: do not use DRIVER_INVALID Hannes Reinecke
2021-04-27 8:30 ` [PATCH 11/40] scsi_error: use DID_TIME_OUT instead of DRIVER_TIMEOUT Hannes Reinecke
2021-04-27 8:30 ` [PATCH 12/40] xen-scsiback: use DID_ERROR instead of DRIVER_ERROR Hannes Reinecke
2021-04-27 8:30 ` [PATCH 13/40] xen-scsifront: compability status handling Hannes Reinecke
2021-04-27 8:30 ` [PATCH 14/40] scsi: Drop the now obsolete driver_byte definitions Hannes Reinecke
2021-04-27 8:30 ` [PATCH 15/40] NCR5380: Fold SCSI message ABORT onto DID_ABORT Hannes Reinecke
2021-04-27 8:30 ` [PATCH 16/40] scsi: add get_{status,host}_byte() accessor function Hannes Reinecke
2021-04-27 8:30 ` [PATCH 17/40] scsi: add scsi_msg_to_host_byte() Hannes Reinecke
2021-04-27 8:30 ` [PATCH 18/40] dc395: use standard macros to set SCSI result Hannes Reinecke
2021-04-27 8:30 ` [PATCH 19/40] dc395: translate message bytes Hannes Reinecke
2021-04-27 8:30 ` Hannes Reinecke [this message]
2021-04-27 8:30 ` [PATCH 21/40] qlogicfas408: whitespace cleanup Hannes Reinecke
2021-04-27 8:30 ` [PATCH 22/40] qlogicfas408: translate message to host byte status Hannes Reinecke
2021-04-27 8:30 ` [PATCH 23/40] nsp32: whitespace cleanup Hannes Reinecke
2021-04-27 8:30 ` [PATCH 24/40] nsp32: do not set message byte Hannes Reinecke
2021-04-27 8:30 ` [PATCH 25/40] wd33c93: translate message byte to host byte Hannes Reinecke
2021-04-27 8:30 ` [PATCH 26/40] mesh: translate message to host byte status Hannes Reinecke
2021-04-27 8:30 ` [PATCH 27/40] acornscsi: remove acornscsi_reportstatus() Hannes Reinecke
2021-04-27 8:30 ` [PATCH 28/40] acornscsi: translate message byte to host byte Hannes Reinecke
2021-04-27 8:30 ` [PATCH 29/40] aha152x: modify done() to use separate status bytes Hannes Reinecke
2021-04-27 8:30 ` [PATCH 30/40] aha152x: do not set message byte when calling scsi_done() Hannes Reinecke
2021-04-27 8:30 ` [PATCH 31/40] advansys: do not set message byte in SCSI status Hannes Reinecke
2021-04-27 8:30 ` [PATCH 32/40] fas216: translate message to host byte status Hannes Reinecke
2021-04-27 8:30 ` [PATCH 33/40] fas216: Use get_status_byte() to avoid using linux-specific status codes Hannes Reinecke
2021-04-27 8:30 ` [PATCH 34/40] FlashPoint: Use standard SCSI definitions Hannes Reinecke
2021-04-27 8:30 ` [PATCH 35/40] fdomain: drop last argument to fdomain_finish_cmd() Hannes Reinecke
2021-04-27 8:30 ` [PATCH 36/40] fdomain: translate message to host byte status Hannes Reinecke
2021-04-27 8:30 ` [PATCH 37/40] scsi: drop message byte helper Hannes Reinecke
2021-04-27 8:30 ` [PATCH 38/40] scsi: kill message byte Hannes Reinecke
2021-04-27 8:30 ` [PATCH 39/40] target: use standard SAM status types Hannes Reinecke
2021-04-27 8:30 ` [PATCH 40/40] scsi: drop obsolete linux-specific SCSI status codes Hannes Reinecke
2021-04-29 6:48 ` Christoph Hellwig
2021-04-29 7:29 ` Hannes Reinecke
2021-04-29 15:52 ` Douglas Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210427083046.31620-21-hare@suse.de \
--to=hare@suse.de \
--cc=bvanassche@acm.org \
--cc=hch@lst.de \
--cc=james.bottomley@hansenpartnership.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox