From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>,
"James E . J . Bottomley" <jejb@linux.vnet.ibm.com>
Cc: linux-scsi@vger.kernel.org, Christoph Hellwig <hch@lst.de>,
Bart Van Assche <bvanassche@acm.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Kiwoong Kim <kwmad.kim@samsung.com>
Subject: [PATCH] ufs-exynos: Move definitions from .h to .c
Date: Sun, 9 May 2021 14:38:17 -0700 [thread overview]
Message-ID: <20210509213817.4348-1-bvanassche@acm.org> (raw)
In the Linux kernel definitions of data structures should occur in .c
files. Hence move the exynos7_uic_attr definition from a .h into a .c
file. Additionally, declare exynos_ufs_drvs static. This patch fixes the
following two sparse warnings:
drivers/scsi/ufs/ufs-exynos.h:248:28: warning: symbol 'exynos_ufs_drvs' was not declared. Should it be static?
drivers/scsi/ufs/ufs-exynos.h:250:28: warning: symbol 'exynos7_uic_attr' was not declared. Should it be static?
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
drivers/scsi/ufs/ufs-exynos.c | 27 ++++++++++++++++++++++++++-
drivers/scsi/ufs/ufs-exynos.h | 26 --------------------------
2 files changed, 26 insertions(+), 27 deletions(-)
diff --git a/drivers/scsi/ufs/ufs-exynos.c b/drivers/scsi/ufs/ufs-exynos.c
index 70647eacf195..4c38689ecdd2 100644
--- a/drivers/scsi/ufs/ufs-exynos.c
+++ b/drivers/scsi/ufs/ufs-exynos.c
@@ -107,6 +107,7 @@ enum {
#define CNTR_DIV_VAL 40
+static struct exynos_ufs_drv_data exynos_ufs_drvs;
static void exynos_ufs_auto_ctrl_hcc(struct exynos_ufs *ufs, bool en);
static void exynos_ufs_ctrl_clkstop(struct exynos_ufs *ufs, bool en);
@@ -1231,8 +1232,32 @@ static int exynos_ufs_remove(struct platform_device *pdev)
return 0;
}
-struct exynos_ufs_drv_data exynos_ufs_drvs = {
+static struct exynos_ufs_uic_attr exynos7_uic_attr = {
+ .tx_trailingclks = 0x10,
+ .tx_dif_p_nsec = 3000000, /* unit: ns */
+ .tx_dif_n_nsec = 1000000, /* unit: ns */
+ .tx_high_z_cnt_nsec = 20000, /* unit: ns */
+ .tx_base_unit_nsec = 100000, /* unit: ns */
+ .tx_gran_unit_nsec = 4000, /* unit: ns */
+ .tx_sleep_cnt = 1000, /* unit: ns */
+ .tx_min_activatetime = 0xa,
+ .rx_filler_enable = 0x2,
+ .rx_dif_p_nsec = 1000000, /* unit: ns */
+ .rx_hibern8_wait_nsec = 4000000, /* unit: ns */
+ .rx_base_unit_nsec = 100000, /* unit: ns */
+ .rx_gran_unit_nsec = 4000, /* unit: ns */
+ .rx_sleep_cnt = 1280, /* unit: ns */
+ .rx_stall_cnt = 320, /* unit: ns */
+ .rx_hs_g1_sync_len_cap = SYNC_LEN_COARSE(0xf),
+ .rx_hs_g2_sync_len_cap = SYNC_LEN_COARSE(0xf),
+ .rx_hs_g3_sync_len_cap = SYNC_LEN_COARSE(0xf),
+ .rx_hs_g1_prep_sync_len_cap = PREP_LEN(0xf),
+ .rx_hs_g2_prep_sync_len_cap = PREP_LEN(0xf),
+ .rx_hs_g3_prep_sync_len_cap = PREP_LEN(0xf),
+ .pa_dbg_option_suite = 0x30103,
+};
+static struct exynos_ufs_drv_data exynos_ufs_drvs = {
.compatible = "samsung,exynos7-ufs",
.uic_attr = &exynos7_uic_attr,
.quirks = UFSHCD_QUIRK_PRDT_BYTE_GRAN |
diff --git a/drivers/scsi/ufs/ufs-exynos.h b/drivers/scsi/ufs/ufs-exynos.h
index 06ee565f7eb0..67505fe32ebf 100644
--- a/drivers/scsi/ufs/ufs-exynos.h
+++ b/drivers/scsi/ufs/ufs-exynos.h
@@ -245,30 +245,4 @@ static inline void exynos_ufs_disable_dbg_mode(struct ufs_hba *hba)
ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_MODE), FALSE);
}
-struct exynos_ufs_drv_data exynos_ufs_drvs;
-
-struct exynos_ufs_uic_attr exynos7_uic_attr = {
- .tx_trailingclks = 0x10,
- .tx_dif_p_nsec = 3000000, /* unit: ns */
- .tx_dif_n_nsec = 1000000, /* unit: ns */
- .tx_high_z_cnt_nsec = 20000, /* unit: ns */
- .tx_base_unit_nsec = 100000, /* unit: ns */
- .tx_gran_unit_nsec = 4000, /* unit: ns */
- .tx_sleep_cnt = 1000, /* unit: ns */
- .tx_min_activatetime = 0xa,
- .rx_filler_enable = 0x2,
- .rx_dif_p_nsec = 1000000, /* unit: ns */
- .rx_hibern8_wait_nsec = 4000000, /* unit: ns */
- .rx_base_unit_nsec = 100000, /* unit: ns */
- .rx_gran_unit_nsec = 4000, /* unit: ns */
- .rx_sleep_cnt = 1280, /* unit: ns */
- .rx_stall_cnt = 320, /* unit: ns */
- .rx_hs_g1_sync_len_cap = SYNC_LEN_COARSE(0xf),
- .rx_hs_g2_sync_len_cap = SYNC_LEN_COARSE(0xf),
- .rx_hs_g3_sync_len_cap = SYNC_LEN_COARSE(0xf),
- .rx_hs_g1_prep_sync_len_cap = PREP_LEN(0xf),
- .rx_hs_g2_prep_sync_len_cap = PREP_LEN(0xf),
- .rx_hs_g3_prep_sync_len_cap = PREP_LEN(0xf),
- .pa_dbg_option_suite = 0x30103,
-};
#endif /* _UFS_EXYNOS_H_ */
next reply other threads:[~2021-05-09 21:38 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20210509213827epcas5p173b48dab49036c8d85eadfc8bda9efd8@epcas5p1.samsung.com>
2021-05-09 21:38 ` Bart Van Assche [this message]
2021-05-16 2:12 ` [PATCH] ufs-exynos: Move definitions from .h to .c Alim Akhtar
2021-05-16 18:10 ` Bart Van Assche
2021-05-16 18:14 ` Martin K. Petersen
2021-05-21 20:07 ` Martin K. Petersen
2021-05-26 4:07 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210509213817.4348-1-bvanassche@acm.org \
--to=bvanassche@acm.org \
--cc=alim.akhtar@samsung.com \
--cc=hch@lst.de \
--cc=jejb@linux.vnet.ibm.com \
--cc=kwmad.kim@samsung.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox