From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org, Jaegeuk Kim <jaegeuk@kernel.org>,
Bart Van Assche <bvanassche@acm.org>
Subject: [PATCH v3 00/18] UFS patches for kernel v5.15
Date: Wed, 21 Jul 2021 20:34:21 -0700 [thread overview]
Message-ID: <20210722033439.26550-1-bvanassche@acm.org> (raw)
Hi Martin,
Please consider the patches in this series for kernel v5.15.
Thank you,
Bart.
Changes compared to v2:
- Included a stack corruption fix.
- Dropped patch "Remove a local variable" and added patches "Revert "Utilize
Transfer Request List Completion Notification Register"" and "Optimize
serialization of setup_xfer_req() calls".
- Added patch "Optimize serialization of setup_xfer_req() calls".
Changes compared to v1:
- Left out the SCSI core patches for the SCSI error handler in order not to
delay the UFS patches by the conversation around the SCSI error handler
patches.
- Restored the WARN_ON_ONCE(tag < 0) statements in the patch that removes
ufshcd_valid_tag().
- Split "Fix a race in the completion path" in two patches.
- Added a fault injection patch.
Bart Van Assche (18):
scsi: ufs: Fix memory corruption by ufshcd_read_desc_param()
scsi: ufs: Reduce power management code duplication
scsi: ufs: Only include power management code if necessary
scsi: ufs: Rename the second ufshcd_probe_hba() argument
scsi: ufs: Use DECLARE_COMPLETION_ONSTACK() where appropriate
scsi: ufs: Remove ufshcd_valid_tag()
scsi: ufs: Verify UIC locking requirements at runtime
scsi: ufs: Improve static type checking for the host controller state
scsi: ufs: Remove several wmb() calls
scsi: ufs: Inline ufshcd_outstanding_req_clear()
scsi: ufs: Revert "Utilize Transfer Request List Completion
Notification Register"
scsi: ufs: Optimize serialization of setup_xfer_req() calls
scsi: ufs: Optimize SCSI command processing
scsi: ufs: Fix the SCSI abort handler
scsi: ufs: Request sense data asynchronously
scsi: ufs: Synchronize SCSI and UFS error handling
scsi: ufs: Retry aborted SCSI commands instead of completing these
successfully
scsi: ufs: Add fault injection support
drivers/scsi/ufs/Kconfig | 7 +
drivers/scsi/ufs/Makefile | 1 +
drivers/scsi/ufs/cdns-pltfrm.c | 7 +-
drivers/scsi/ufs/tc-dwc-g210-pci.c | 32 +-
drivers/scsi/ufs/tc-dwc-g210-pltfrm.c | 7 +-
drivers/scsi/ufs/ufs-exynos.c | 7 +-
drivers/scsi/ufs/ufs-fault-injection.c | 70 ++++
drivers/scsi/ufs/ufs-fault-injection.h | 24 ++
drivers/scsi/ufs/ufs-hisi.c | 7 +-
drivers/scsi/ufs/ufs-mediatek.c | 7 +-
drivers/scsi/ufs/ufs-qcom.c | 7 +-
drivers/scsi/ufs/ufshcd-pci.c | 48 +--
drivers/scsi/ufs/ufshcd-pltfrm.c | 47 ---
drivers/scsi/ufs/ufshcd-pltfrm.h | 18 -
drivers/scsi/ufs/ufshcd.c | 491 +++++++++++--------------
drivers/scsi/ufs/ufshcd.h | 63 ++--
drivers/scsi/ufs/ufshci.h | 1 -
17 files changed, 373 insertions(+), 471 deletions(-)
create mode 100644 drivers/scsi/ufs/ufs-fault-injection.c
create mode 100644 drivers/scsi/ufs/ufs-fault-injection.h
next reply other threads:[~2021-07-22 3:34 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-22 3:34 Bart Van Assche [this message]
2021-07-22 3:34 ` [PATCH v3 01/18] scsi: ufs: Fix memory corruption by ufshcd_read_desc_param() Bart Van Assche
2021-07-25 12:40 ` Avri Altman
2021-07-22 3:34 ` [PATCH v3 02/18] scsi: ufs: Reduce power management code duplication Bart Van Assche
2021-07-31 14:44 ` Stanley Chu
2021-07-22 3:34 ` [PATCH v3 03/18] scsi: ufs: Only include power management code if necessary Bart Van Assche
2021-07-22 3:34 ` [PATCH v3 04/18] scsi: ufs: Rename the second ufshcd_probe_hba() argument Bart Van Assche
2021-08-02 8:17 ` Stanley Chu
2021-07-22 3:34 ` [PATCH v3 05/18] scsi: ufs: Use DECLARE_COMPLETION_ONSTACK() where appropriate Bart Van Assche
2021-07-22 3:34 ` [PATCH v3 06/18] scsi: ufs: Remove ufshcd_valid_tag() Bart Van Assche
2021-07-22 3:34 ` [PATCH v3 07/18] scsi: ufs: Verify UIC locking requirements at runtime Bart Van Assche
2021-07-22 3:34 ` [PATCH v3 08/18] scsi: ufs: Improve static type checking for the host controller state Bart Van Assche
2021-07-22 3:34 ` [PATCH v3 09/18] scsi: ufs: Remove several wmb() calls Bart Van Assche
2021-07-25 13:20 ` Avri Altman
2021-07-22 3:34 ` [PATCH v3 10/18] scsi: ufs: Inline ufshcd_outstanding_req_clear() Bart Van Assche
2021-07-29 7:42 ` Bean Huo
2021-07-22 3:34 ` [PATCH v3 11/18] scsi: ufs: Revert "Utilize Transfer Request List Completion Notification Register" Bart Van Assche
2021-07-29 8:03 ` Bean Huo
2021-07-29 16:10 ` Bart Van Assche
2021-07-29 16:13 ` Bart Van Assche
2021-07-29 21:14 ` Bean Huo
2021-08-02 15:24 ` Bean Huo
2021-08-03 18:49 ` Bart Van Assche
2021-07-22 3:34 ` [PATCH v3 12/18] scsi: ufs: Optimize serialization of setup_xfer_req() calls Bart Van Assche
2021-07-29 8:07 ` Bean Huo
2021-07-22 3:34 ` [PATCH v3 13/18] scsi: ufs: Optimize SCSI command processing Bart Van Assche
2021-07-29 9:12 ` Bean Huo
2021-07-29 16:11 ` Bart Van Assche
2021-08-02 12:11 ` Bean Huo
2021-07-22 3:34 ` [PATCH v3 14/18] scsi: ufs: Fix the SCSI abort handler Bart Van Assche
2021-08-02 13:15 ` Bean Huo
2021-07-22 3:34 ` [PATCH v3 15/18] scsi: ufs: Request sense data asynchronously Bart Van Assche
2021-08-02 13:16 ` Bean Huo
2021-07-22 3:34 ` [PATCH v3 16/18] scsi: ufs: Synchronize SCSI and UFS error handling Bart Van Assche
2021-08-02 14:24 ` Bean Huo
2021-08-28 9:47 ` Adrian Hunter
2021-08-29 7:17 ` Avri Altman
2021-08-29 21:33 ` Bart Van Assche
2021-08-29 9:57 ` Adrian Hunter
2021-08-29 22:18 ` Bart Van Assche
2021-08-31 7:24 ` Adrian Hunter
2021-08-31 10:04 ` Adrian Hunter
2021-08-31 17:18 ` Bart Van Assche
2021-09-01 7:42 ` Adrian Hunter
2021-09-01 20:46 ` Bart Van Assche
2021-09-02 6:02 ` Adrian Hunter
2021-07-22 3:34 ` [PATCH v3 17/18] scsi: ufs: Retry aborted SCSI commands instead of completing these successfully Bart Van Assche
2021-08-02 15:03 ` Bean Huo
2021-07-22 3:34 ` [PATCH v3 18/18] scsi: ufs: Add fault injection support Bart Van Assche
2021-08-02 15:03 ` Bean Huo
[not found] ` <CGME20210722033524epcas2p31e41c1db6883aaa644edf23bbe8a1ca2@epcms2p4>
2021-07-28 6:48 ` [PATCH v3 06/18] scsi: ufs: Remove ufshcd_valid_tag() Daejun Park
2021-07-28 22:48 ` Bart Van Assche
[not found] ` <CGME20210722033524epcas2p31e41c1db6883aaa644edf23bbe8a1ca2@epcms2p7>
2021-07-29 0:26 ` Daejun Park
[not found] ` <CGME20210722033530epcas2p4c76293e5fc5163fed3995acdd02678ce@epcms2p1>
2021-07-28 7:56 ` [PATCH v3 08/18] scsi: ufs: Improve static type checking for the host controller state Keoseong Park
[not found] ` <CGME20210722033504epcas2p1cc3c6f61e81814004c36b89c7c9e3dd5@epcms2p5>
2021-07-29 0:56 ` [PATCH v3 01/18] scsi: ufs: Fix memory corruption by ufshcd_read_desc_param() Daejun Park
[not found] ` <CGME20210722033510epcas2p410be4f2f387e98babeefc754a9fc1414@epcms2p2>
2021-07-29 0:56 ` [PATCH v3 02/18] scsi: ufs: Reduce power management code duplication Daejun Park
[not found] ` <CGME20210722033513epcas2p22e4c2e6ea644992ede2739ebe381d53f@epcms2p8>
2021-07-29 0:56 ` [PATCH v3 03/18] scsi: ufs: Only include power management code if necessary Daejun Park
2021-07-31 14:48 ` Stanley Chu
[not found] ` <CGME20210722033520epcas2p31c6f801eda7f100491c85e3f9c7d6600@epcms2p6>
2021-07-29 0:56 ` [PATCH v3 04/18] scsi: ufs: Rename the second ufshcd_probe_hba() argument Daejun Park
[not found] ` <CGME20210722033523epcas2p22ea9a4afaeb46870638ff4429010a3c1@epcms2p7>
2021-07-29 0:57 ` [PATCH v3 05/18] scsi: ufs: Use DECLARE_COMPLETION_ONSTACK() where appropriate Daejun Park
[not found] ` <CGME20210722033527epcas2p384eefb77dff85f5d8d59beede98b6bdc@epcms2p4>
2021-07-29 0:57 ` [PATCH v3 07/18] scsi: ufs: Verify UIC locking requirements at runtime Daejun Park
[not found] ` <CGME20210722033531epcas2p4a4a975689ad7966d3db56dd81a7a255f@epcms2p1>
2021-07-29 0:57 ` [PATCH v3 08/18] scsi: ufs: Improve static type checking for the host controller state Daejun Park
[not found] ` <CGME20210722033536epcas2p133eef1f5e2e5a1022ccef23e9c1035aa@epcms2p5>
2021-07-29 1:24 ` [PATCH v3 09/18] scsi: ufs: Remove several wmb() calls Daejun Park
[not found] ` <CGME20210722033552epcas2p39f68ea806091ffa9755a25b778d70101@epcms2p2>
2021-07-29 1:25 ` [PATCH v3 12/18] scsi: ufs: Optimize serialization of setup_xfer_req() calls Daejun Park
[not found] ` <CGME20210722033553epcas2p2818d9c1f046e8514415a72a4ddddc3db@epcms2p1>
2021-07-29 1:25 ` [PATCH v3 13/18] scsi: ufs: Optimize SCSI command processing Daejun Park
2021-08-03 2:13 ` [PATCH v3 00/18] UFS patches for kernel v5.15 Martin K. Petersen
2021-08-10 5:20 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210722033439.26550-1-bvanassche@acm.org \
--to=bvanassche@acm.org \
--cc=jaegeuk@kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).