[PATCH AUTOSEL 5.14 16/40] scsi: sd: Free scsi_disk device via put_device()

[PATCH AUTOSEL 5.14 16/40] scsi: sd: Free scsi_disk device via put_device()

[Sasha Levin]

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit 265dfe8ebbabae7959060bd1c3f75c2473b697ed ]

After a device is initialized via device_initialize() it should be freed
via put_device(). sd_probe() currently gets this wrong, fix it up.

Link: https://lore.kernel.org/r/20210906090112.531442-1-ming.lei@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/sd.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index b8d55af763f9..134c7a8145ef 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -3441,15 +3441,16 @@ static int sd_probe(struct device *dev)
 	}
 
 	device_initialize(&sdkp->dev);
-	sdkp->dev.parent = dev;
+	sdkp->dev.parent = get_device(dev);
 	sdkp->dev.class = &sd_disk_class;
 	dev_set_name(&sdkp->dev, "%s", dev_name(dev));
 
 	error = device_add(&sdkp->dev);
-	if (error)
-		goto out_free_index;
+	if (error) {
+		put_device(&sdkp->dev);
+		goto out;
+	}
 
-	get_device(dev);
 	dev_set_drvdata(dev, sdkp);
 
 	gd->major = sd_major((index & 0xf0) >> 4);
-- 
2.33.0

[PATCH AUTOSEL 5.14 17/40] scsi: elx: efct: Do not hold lock while calling fc_vport_terminate()

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 450907424d9ebcc28fab42a065c3cddce49ee97d ]

Smatch checker reported the following error:

  drivers/base/power/sysfs.c:833 dpm_sysfs_remove()
  warn: sleeping in atomic context

With a calling sequence of:

  efct_lio_npiv_drop_nport() <- disables preempt
  -> fc_vport_terminate()
     -> device_del()
        -> dpm_sysfs_remove()

Issue is efct_lio_npiv_drop_nport() is making the fc_vport_terminate() call
while holding a lock w/ ipl raised.

It is unnecessary to hold the lock over this call, shift where the lock is
taken.

Link: https://lore.kernel.org/r/20210907165225.10821-1-jsmart2021@gmail.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/elx/efct/efct_lio.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/elx/efct/efct_lio.c b/drivers/scsi/elx/efct/efct_lio.c
index e0d798d6baee..f1d6fcfe12f0 100644
--- a/drivers/scsi/elx/efct/efct_lio.c
+++ b/drivers/scsi/elx/efct/efct_lio.c
@@ -880,11 +880,11 @@ efct_lio_npiv_drop_nport(struct se_wwn *wwn)
 	struct efct *efct = lio_vport->efct;
 	unsigned long flags = 0;
 
-	spin_lock_irqsave(&efct->tgt_efct.efct_lio_lock, flags);
-
 	if (lio_vport->fc_vport)
 		fc_vport_terminate(lio_vport->fc_vport);
 
+	spin_lock_irqsave(&efct->tgt_efct.efct_lio_lock, flags);
+
 	list_for_each_entry_safe(vport, next_vport, &efct->tgt_efct.vport_list,
 				 list_entry) {
 		if (vport->lio_vport == lio_vport) {
-- 
2.33.0

[PATCH AUTOSEL 5.14 33/40] scsi: ses: Retry failed Send/Receive Diagnostic commands

[Sasha Levin]

From: Wen Xiong <wenxiong@linux.ibm.com>

[ Upstream commit fbdac19e642899455b4e64c63aafe2325df7aafa ]

Setting SCSI logging level with error=3, we saw some errors from enclosues:

[108017.360833] ses 0:0:9:0: tag#641 Done: NEEDS_RETRY Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[108017.360838] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00
[108017.427778] ses 0:0:9:0: Power-on or device reset occurred
[108017.427784] ses 0:0:9:0: tag#641 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[108017.427788] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00
[108017.427791] ses 0:0:9:0: tag#641 Sense Key : Unit Attention [current]
[108017.427793] ses 0:0:9:0: tag#641 Add. Sense: Bus device reset function occurred
[108017.427801] ses 0:0:9:0: Failed to get diagnostic page 0x1
[108017.427804] ses 0:0:9:0: Failed to bind enclosure -19
[108017.427895] ses 0:0:10:0: Attached Enclosure device
[108017.427942] ses 0:0:10:0: Attached scsi generic sg18 type 13

Retry if the Send/Receive Diagnostic commands complete with a transient
error status (NOT_READY or UNIT_ATTENTION with ASC 0x29).

Link: https://lore.kernel.org/r/1631849061-10210-2-git-send-email-wenxiong@linux.ibm.com
Reviewed-by: Brian King <brking@linux.ibm.com>
Reviewed-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: Wen Xiong <wenxiong@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ses.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index c2afba2a5414..43e682297fd5 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -87,9 +87,16 @@ static int ses_recv_diag(struct scsi_device *sdev, int page_code,
 		0
 	};
 	unsigned char recv_page_code;
+	unsigned int retries = SES_RETRIES;
+	struct scsi_sense_hdr sshdr;
+
+	do {
+		ret = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen,
+				       &sshdr, SES_TIMEOUT, 1, NULL);
+	} while (ret > 0 && --retries && scsi_sense_valid(&sshdr) &&
+		 (sshdr.sense_key == NOT_READY ||
+		  (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29)));
 
-	ret =  scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen,
-				NULL, SES_TIMEOUT, SES_RETRIES, NULL);
 	if (unlikely(ret))
 		return ret;
 
@@ -121,9 +128,16 @@ static int ses_send_diag(struct scsi_device *sdev, int page_code,
 		bufflen & 0xff,
 		0
 	};
+	struct scsi_sense_hdr sshdr;
+	unsigned int retries = SES_RETRIES;
+
+	do {
+		result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, buf, bufflen,
+					  &sshdr, SES_TIMEOUT, 1, NULL);
+	} while (result > 0 && --retries && scsi_sense_valid(&sshdr) &&
+		 (sshdr.sense_key == NOT_READY ||
+		  (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29)));
 
-	result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, buf, bufflen,
-				  NULL, SES_TIMEOUT, SES_RETRIES, NULL);
 	if (result)
 		sdev_printk(KERN_ERR, sdev, "SEND DIAGNOSTIC result: %8x\n",
 			    result);
-- 
2.33.0