From: Manish Rangankar <mrangankar@marvell.com>
To: <martin.petersen@oracle.com>, <lduncan@suse.com>, <cleech@redhat.com>
Cc: <linux-scsi@vger.kernel.org>, <GR-QLogic-Storage-Upstream@marvell.com>
Subject: [PATCH v2] qedi: Fix cmd_cleanup_cmpl counter mismatch issue.
Date: Thu, 25 Nov 2021 23:28:53 -0800 [thread overview]
Message-ID: <20211126072853.7862-1-mrangankar@marvell.com> (raw)
When issued LUN reset under heavy i/o, we hit the qedi WARN_ON
because of a mismatch in firmware i/o cmd cleanup request count
and i/o cmd cleanup response count received. The mismatch is
because of the race caused by the postfix increment of
cmd_cleanup_cmpl.
[qedi_clearsq:1295]:18: fatal error, need hard reset, cid=0x0
WARNING: CPU: 48 PID: 110963 at drivers/scsi/qedi/qedi_fw.c:1296 qedi_clearsq+0xa5/0xd0 [qedi]
CPU: 48 PID: 110963 Comm: kworker/u130:0 Kdump: loaded Tainted: G W
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 04/15/2020
Workqueue: iscsi_conn_cleanup iscsi_cleanup_conn_work_fn [scsi_transport_iscsi]
RIP: 0010:qedi_clearsq+0xa5/0xd0 [qedi]
RSP: 0018:ffffac2162c7fd98 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff975213c40ab8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9761bf816858 RDI: ffff9761bf816858
RBP: ffff975247018628 R08: 000000000000522c R09: 000000000000005b
R10: 0000000000000000 R11: ffffac2162c7fbd8 R12: ffff97522e1b2be8
R13: 0000000000000000 R14: ffff97522e1b2800 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff9761bf800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1a34e3e1a0 CR3: 0000000108bb2000 CR4: 0000000000350ee0
Call Trace:
qedi_ep_disconnect+0x533/0x550 [qedi]
? iscsi_dbg_trace+0x63/0x80 [scsi_transport_iscsi]
? _cond_resched+0x15/0x30
? iscsi_suspend_queue+0x19/0x40 [libiscsi]
iscsi_ep_disconnect+0xb0/0x130 [scsi_transport_iscsi]
iscsi_cleanup_conn_work_fn+0x82/0x130 [scsi_transport_iscsi]
process_one_work+0x1a7/0x360
? create_worker+0x1a0/0x1a0
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x116/0x130
? kthread_flush_work_fn+0x10/0x10
ret_from_fork+0x22/0x40
---[ end trace 5f1441f59082235c ]---
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
---
drivers/scsi/qedi/qedi_fw.c | 37 ++++++++++++++--------------------
drivers/scsi/qedi/qedi_iscsi.c | 2 +-
drivers/scsi/qedi/qedi_iscsi.h | 2 +-
3 files changed, 17 insertions(+), 24 deletions(-)
diff --git a/drivers/scsi/qedi/qedi_fw.c b/drivers/scsi/qedi/qedi_fw.c
index 84a4204a2cb4..5916ed7662d5 100644
--- a/drivers/scsi/qedi/qedi_fw.c
+++ b/drivers/scsi/qedi/qedi_fw.c
@@ -732,7 +732,6 @@ static void qedi_process_cmd_cleanup_resp(struct qedi_ctx *qedi,
{
struct qedi_work_map *work, *work_tmp;
u32 proto_itt = cqe->itid;
- itt_t protoitt = 0;
int found = 0;
struct qedi_cmd *qedi_cmd = NULL;
u32 iscsi_cid;
@@ -812,16 +811,12 @@ static void qedi_process_cmd_cleanup_resp(struct qedi_ctx *qedi,
return;
check_cleanup_reqs:
- if (qedi_conn->cmd_cleanup_req > 0) {
- QEDI_INFO(&qedi->dbg_ctx, QEDI_LOG_TID,
+ if (atomic_inc_return(&qedi_conn->cmd_cleanup_cmpl) ==
+ qedi_conn->cmd_cleanup_req) {
+ QEDI_INFO(&qedi->dbg_ctx, QEDI_LOG_SCSI_TM,
"Freeing tid=0x%x for cid=0x%x\n",
cqe->itid, qedi_conn->iscsi_conn_id);
- qedi_conn->cmd_cleanup_cmpl++;
wake_up(&qedi_conn->wait_queue);
- } else {
- QEDI_ERR(&qedi->dbg_ctx,
- "Delayed or untracked cleanup response, itt=0x%x, tid=0x%x, cid=0x%x\n",
- protoitt, cqe->itid, qedi_conn->iscsi_conn_id);
}
}
@@ -1163,7 +1158,7 @@ int qedi_cleanup_all_io(struct qedi_ctx *qedi, struct qedi_conn *qedi_conn,
}
qedi_conn->cmd_cleanup_req = 0;
- qedi_conn->cmd_cleanup_cmpl = 0;
+ atomic_set(&qedi_conn->cmd_cleanup_cmpl, 0);
QEDI_INFO(&qedi->dbg_ctx, QEDI_LOG_SCSI_TM,
"active_cmd_count=%d, cid=0x%x, in_recovery=%d, lun_reset=%d\n",
@@ -1215,16 +1210,15 @@ int qedi_cleanup_all_io(struct qedi_ctx *qedi, struct qedi_conn *qedi_conn,
qedi_conn->iscsi_conn_id);
rval = wait_event_interruptible_timeout(qedi_conn->wait_queue,
- ((qedi_conn->cmd_cleanup_req ==
- qedi_conn->cmd_cleanup_cmpl) ||
- test_bit(QEDI_IN_RECOVERY,
- &qedi->flags)),
- 5 * HZ);
+ (qedi_conn->cmd_cleanup_req ==
+ atomic_read(&qedi_conn->cmd_cleanup_cmpl)) ||
+ test_bit(QEDI_IN_RECOVERY, &qedi->flags),
+ 5 * HZ);
if (rval) {
QEDI_INFO(&qedi->dbg_ctx, QEDI_LOG_SCSI_TM,
"i/o cmd_cleanup_req=%d, equal to cmd_cleanup_cmpl=%d, cid=0x%x\n",
qedi_conn->cmd_cleanup_req,
- qedi_conn->cmd_cleanup_cmpl,
+ atomic_read(&qedi_conn->cmd_cleanup_cmpl),
qedi_conn->iscsi_conn_id);
return 0;
@@ -1233,7 +1227,7 @@ int qedi_cleanup_all_io(struct qedi_ctx *qedi, struct qedi_conn *qedi_conn,
QEDI_INFO(&qedi->dbg_ctx, QEDI_LOG_SCSI_TM,
"i/o cmd_cleanup_req=%d, not equal to cmd_cleanup_cmpl=%d, cid=0x%x\n",
qedi_conn->cmd_cleanup_req,
- qedi_conn->cmd_cleanup_cmpl,
+ atomic_read(&qedi_conn->cmd_cleanup_cmpl),
qedi_conn->iscsi_conn_id);
iscsi_host_for_each_session(qedi->shost,
@@ -1242,11 +1236,10 @@ int qedi_cleanup_all_io(struct qedi_ctx *qedi, struct qedi_conn *qedi_conn,
/* Enable IOs for all other sessions except current.*/
if (!wait_event_interruptible_timeout(qedi_conn->wait_queue,
- (qedi_conn->cmd_cleanup_req ==
- qedi_conn->cmd_cleanup_cmpl) ||
- test_bit(QEDI_IN_RECOVERY,
- &qedi->flags),
- 5 * HZ)) {
+ (qedi_conn->cmd_cleanup_req ==
+ atomic_read(&qedi_conn->cmd_cleanup_cmpl)) ||
+ test_bit(QEDI_IN_RECOVERY, &qedi->flags),
+ 5 * HZ)) {
iscsi_host_for_each_session(qedi->shost,
qedi_mark_device_available);
return -1;
@@ -1266,7 +1259,7 @@ void qedi_clearsq(struct qedi_ctx *qedi, struct qedi_conn *qedi_conn,
qedi_ep = qedi_conn->ep;
qedi_conn->cmd_cleanup_req = 0;
- qedi_conn->cmd_cleanup_cmpl = 0;
+ atomic_set(&qedi_conn->cmd_cleanup_cmpl, 0);
if (!qedi_ep) {
QEDI_WARN(&qedi->dbg_ctx,
diff --git a/drivers/scsi/qedi/qedi_iscsi.c b/drivers/scsi/qedi/qedi_iscsi.c
index 88aa7d8b11c9..282ecb4e39bb 100644
--- a/drivers/scsi/qedi/qedi_iscsi.c
+++ b/drivers/scsi/qedi/qedi_iscsi.c
@@ -412,7 +412,7 @@ static int qedi_conn_bind(struct iscsi_cls_session *cls_session,
qedi_conn->iscsi_conn_id = qedi_ep->iscsi_cid;
qedi_conn->fw_cid = qedi_ep->fw_cid;
qedi_conn->cmd_cleanup_req = 0;
- qedi_conn->cmd_cleanup_cmpl = 0;
+ atomic_set(&qedi_conn->cmd_cleanup_cmpl, 0);
if (qedi_bind_conn_to_iscsi_cid(qedi, qedi_conn)) {
rc = -EINVAL;
diff --git a/drivers/scsi/qedi/qedi_iscsi.h b/drivers/scsi/qedi/qedi_iscsi.h
index a282860da0aa..9b9f2e44fdde 100644
--- a/drivers/scsi/qedi/qedi_iscsi.h
+++ b/drivers/scsi/qedi/qedi_iscsi.h
@@ -155,7 +155,7 @@ struct qedi_conn {
spinlock_t list_lock; /* internal conn lock */
u32 active_cmd_count;
u32 cmd_cleanup_req;
- u32 cmd_cleanup_cmpl;
+ atomic_t cmd_cleanup_cmpl;
u32 iscsi_conn_id;
int itt;
--
2.18.2
next reply other threads:[~2021-11-26 7:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-26 7:28 Manish Rangankar [this message]
2021-12-01 4:22 ` [PATCH v2] qedi: Fix cmd_cleanup_cmpl counter mismatch issue Manish Rangankar
2021-12-03 2:53 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211126072853.7862-1-mrangankar@marvell.com \
--to=mrangankar@marvell.com \
--cc=GR-QLogic-Storage-Upstream@marvell.com \
--cc=cleech@redhat.com \
--cc=lduncan@suse.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox