From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org, Bart Van Assche <bvanassche@acm.org>,
Johannes Thumshirn <johannes.thumshirn@wdc.com>,
"James E.J. Bottomley" <jejb@linux.ibm.com>
Subject: [PATCH v2 21/44] imm: Move the SCSI pointer to private command data
Date: Tue, 8 Feb 2022 09:24:51 -0800 [thread overview]
Message-ID: <20220208172514.3481-22-bvanassche@acm.org> (raw)
In-Reply-To: <20220208172514.3481-1-bvanassche@acm.org>
Set .cmd_size in the SCSI host template instead of using the SCSI pointer.
This patch prepares for removal of the SCSI pointer from struct scsi_cmnd.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
drivers/scsi/imm.c | 88 ++++++++++++++++++++++++----------------------
drivers/scsi/imm.h | 11 ++++++
2 files changed, 56 insertions(+), 43 deletions(-)
diff --git a/drivers/scsi/imm.c b/drivers/scsi/imm.c
index 8afdb4dba2be..3d86e3a52866 100644
--- a/drivers/scsi/imm.c
+++ b/drivers/scsi/imm.c
@@ -66,7 +66,7 @@ static void got_it(imm_struct *dev)
{
dev->base = dev->dev->port->base;
if (dev->cur_cmd)
- dev->cur_cmd->SCp.phase = 1;
+ imm_scsi_pointer(dev->cur_cmd)->phase = 1;
else
wake_up(dev->waiting);
}
@@ -618,13 +618,14 @@ static inline int imm_send_command(struct scsi_cmnd *cmd)
* The driver appears to remain stable if we speed up the parallel port
* i/o in this function, but not elsewhere.
*/
-static int imm_completion(struct scsi_cmnd *cmd)
+static int imm_completion(struct scsi_cmnd *const cmd)
{
/* Return codes:
* -1 Error
* 0 Told to schedule
* 1 Finished data transfer
*/
+ struct scsi_pointer *scsi_pointer = imm_scsi_pointer(cmd);
imm_struct *dev = imm_dev(cmd->device->host);
unsigned short ppb = dev->base;
unsigned long start_jiffies = jiffies;
@@ -660,44 +661,43 @@ static int imm_completion(struct scsi_cmnd *cmd)
* a) Drive status is screwy (!ready && !present)
* b) Drive is requesting/sending more data than expected
*/
- if (((r & 0x88) != 0x88) || (cmd->SCp.this_residual <= 0)) {
+ if ((r & 0x88) != 0x88 || scsi_pointer->this_residual <= 0) {
imm_fail(dev, DID_ERROR);
return -1; /* ERROR_RETURN */
}
/* determine if we should use burst I/O */
if (dev->rd == 0) {
- fast = (bulk
- && (cmd->SCp.this_residual >=
- IMM_BURST_SIZE)) ? IMM_BURST_SIZE : 2;
- status = imm_out(dev, cmd->SCp.ptr, fast);
+ fast = bulk && scsi_pointer->this_residual >=
+ IMM_BURST_SIZE ? IMM_BURST_SIZE : 2;
+ status = imm_out(dev, scsi_pointer->ptr, fast);
} else {
- fast = (bulk
- && (cmd->SCp.this_residual >=
- IMM_BURST_SIZE)) ? IMM_BURST_SIZE : 1;
- status = imm_in(dev, cmd->SCp.ptr, fast);
+ fast = bulk && scsi_pointer->this_residual >=
+ IMM_BURST_SIZE ? IMM_BURST_SIZE : 1;
+ status = imm_in(dev, scsi_pointer->ptr, fast);
}
- cmd->SCp.ptr += fast;
- cmd->SCp.this_residual -= fast;
+ scsi_pointer->ptr += fast;
+ scsi_pointer->this_residual -= fast;
if (!status) {
imm_fail(dev, DID_BUS_BUSY);
return -1; /* ERROR_RETURN */
}
- if (cmd->SCp.buffer && !cmd->SCp.this_residual) {
+ if (scsi_pointer->buffer && !scsi_pointer->this_residual) {
/* if scatter/gather, advance to the next segment */
- if (cmd->SCp.buffers_residual--) {
- cmd->SCp.buffer = sg_next(cmd->SCp.buffer);
- cmd->SCp.this_residual =
- cmd->SCp.buffer->length;
- cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
+ if (scsi_pointer->buffers_residual--) {
+ scsi_pointer->buffer =
+ sg_next(scsi_pointer->buffer);
+ scsi_pointer->this_residual =
+ scsi_pointer->buffer->length;
+ scsi_pointer->ptr = sg_virt(scsi_pointer->buffer);
/*
* Make sure that we transfer even number of bytes
* otherwise it makes imm_byte_out() messy.
*/
- if (cmd->SCp.this_residual & 0x01)
- cmd->SCp.this_residual++;
+ if (scsi_pointer->this_residual & 0x01)
+ scsi_pointer->this_residual++;
}
}
/* Now check to see if the drive is ready to comunicate */
@@ -762,7 +762,7 @@ static void imm_interrupt(struct work_struct *work)
}
#endif
- if (cmd->SCp.phase > 1)
+ if (imm_scsi_pointer(cmd)->phase > 1)
imm_disconnect(dev);
imm_pb_dismiss(dev);
@@ -774,8 +774,9 @@ static void imm_interrupt(struct work_struct *work)
return;
}
-static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
+static int imm_engine(imm_struct *dev, struct scsi_cmnd *const cmd)
{
+ struct scsi_pointer *scsi_pointer = imm_scsi_pointer(cmd);
unsigned short ppb = dev->base;
unsigned char l = 0, h = 0;
int retv, x;
@@ -786,7 +787,7 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
if (dev->failed)
return 0;
- switch (cmd->SCp.phase) {
+ switch (scsi_pointer->phase) {
case 0: /* Phase 0 - Waiting for parport */
if (time_after(jiffies, dev->jstart + HZ)) {
/*
@@ -800,7 +801,7 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
case 1: /* Phase 1 - Connected */
imm_connect(dev, CONNECT_EPP_MAYBE);
- cmd->SCp.phase++;
+ scsi_pointer->phase++;
fallthrough;
case 2: /* Phase 2 - We are now talking to the scsi bus */
@@ -808,7 +809,7 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
imm_fail(dev, DID_NO_CONNECT);
return 0;
}
- cmd->SCp.phase++;
+ scsi_pointer->phase++;
fallthrough;
case 3: /* Phase 3 - Ready to accept a command */
@@ -818,23 +819,23 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
if (!imm_send_command(cmd))
return 0;
- cmd->SCp.phase++;
+ scsi_pointer->phase++;
fallthrough;
case 4: /* Phase 4 - Setup scatter/gather buffers */
if (scsi_bufflen(cmd)) {
- cmd->SCp.buffer = scsi_sglist(cmd);
- cmd->SCp.this_residual = cmd->SCp.buffer->length;
- cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
+ scsi_pointer->buffer = scsi_sglist(cmd);
+ scsi_pointer->this_residual = scsi_pointer->buffer->length;
+ scsi_pointer->ptr = sg_virt(scsi_pointer->buffer);
} else {
- cmd->SCp.buffer = NULL;
- cmd->SCp.this_residual = 0;
- cmd->SCp.ptr = NULL;
+ scsi_pointer->buffer = NULL;
+ scsi_pointer->this_residual = 0;
+ scsi_pointer->ptr = NULL;
}
- cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1;
- cmd->SCp.phase++;
- if (cmd->SCp.this_residual & 0x01)
- cmd->SCp.this_residual++;
+ scsi_pointer->buffers_residual = scsi_sg_count(cmd) - 1;
+ scsi_pointer->phase++;
+ if (scsi_pointer->this_residual & 0x01)
+ scsi_pointer->this_residual++;
fallthrough;
case 5: /* Phase 5 - Pre-Data transfer stage */
@@ -851,7 +852,7 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
if ((dev->dp) && (dev->rd))
if (imm_negotiate(dev))
return 0;
- cmd->SCp.phase++;
+ scsi_pointer->phase++;
fallthrough;
case 6: /* Phase 6 - Data transfer stage */
@@ -867,7 +868,7 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
if (retv == 0)
return 1;
}
- cmd->SCp.phase++;
+ scsi_pointer->phase++;
fallthrough;
case 7: /* Phase 7 - Post data transfer stage */
@@ -879,7 +880,7 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
w_ctr(ppb, 0x4);
}
}
- cmd->SCp.phase++;
+ scsi_pointer->phase++;
fallthrough;
case 8: /* Phase 8 - Read status/message */
@@ -922,7 +923,7 @@ static int imm_queuecommand_lck(struct scsi_cmnd *cmd)
dev->jstart = jiffies;
dev->cur_cmd = cmd;
cmd->result = DID_ERROR << 16; /* default return code */
- cmd->SCp.phase = 0; /* bus free */
+ imm_scsi_pointer(cmd)->phase = 0; /* bus free */
schedule_delayed_work(&dev->imm_tq, 0);
@@ -961,7 +962,7 @@ static int imm_abort(struct scsi_cmnd *cmd)
* have tied the SCSI_MESSAGE line high in the interface
*/
- switch (cmd->SCp.phase) {
+ switch (imm_scsi_pointer(cmd)->phase) {
case 0: /* Do not have access to parport */
case 1: /* Have not connected to interface */
dev->cur_cmd = NULL; /* Forget the problem */
@@ -987,7 +988,7 @@ static int imm_reset(struct scsi_cmnd *cmd)
{
imm_struct *dev = imm_dev(cmd->device->host);
- if (cmd->SCp.phase)
+ if (imm_scsi_pointer(cmd)->phase)
imm_disconnect(dev);
dev->cur_cmd = NULL; /* Forget the problem */
@@ -1109,6 +1110,7 @@ static struct scsi_host_template imm_template = {
.sg_tablesize = SG_ALL,
.can_queue = 1,
.slave_alloc = imm_adjust_queue,
+ .cmd_size = sizeof(struct imm_cmd_priv),
};
/***************************************************************************
diff --git a/drivers/scsi/imm.h b/drivers/scsi/imm.h
index 7f2bb35b1b87..12cbc7ee8bba 100644
--- a/drivers/scsi/imm.h
+++ b/drivers/scsi/imm.h
@@ -139,6 +139,17 @@ static char *IMM_MODE_STRING[] =
#define w_ctr(x,y) outb(y, (x)+2)
#endif
+struct imm_cmd_priv {
+ struct scsi_pointer scsi_pointer;
+};
+
+static inline struct scsi_pointer *imm_scsi_pointer(struct scsi_cmnd *cmd)
+{
+ struct imm_cmd_priv *icmd = scsi_cmd_priv(cmd);
+
+ return &icmd->scsi_pointer;
+}
+
static int imm_engine(imm_struct *, struct scsi_cmnd *);
#endif /* _IMM_H */
next prev parent reply other threads:[~2022-02-08 17:26 UTC|newest]
Thread overview: 168+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-08 17:24 [PATCH v2 00/44] Remove the SCSI pointer from struct scsi_cmnd Bart Van Assche
2022-02-08 17:24 ` [PATCH v2 01/44] ips: Use true and false instead of TRUE and FALSE Bart Van Assche
2022-02-08 18:04 ` John Garry
2022-02-09 0:04 ` Bart Van Assche
2022-02-09 9:06 ` John Garry
2022-02-08 20:00 ` Himanshu Madhani
2022-02-09 7:23 ` Hannes Reinecke
2022-02-08 17:24 ` [PATCH v2 02/44] nsp_cs: " Bart Van Assche
2022-02-08 19:22 ` Himanshu Madhani
2022-02-09 7:23 ` Hannes Reinecke
2022-02-09 9:11 ` John Garry
2022-02-08 17:24 ` [PATCH v2 03/44] scsi: Remove drivers/scsi/scsi.h Bart Van Assche
2022-02-08 19:22 ` Himanshu Madhani
2022-02-09 7:26 ` Hannes Reinecke
2022-02-09 17:39 ` Bart Van Assche
2022-02-09 8:55 ` Johannes Thumshirn
2022-02-09 9:17 ` John Garry
2022-02-09 18:21 ` John Garry
2022-02-08 17:24 ` [PATCH v2 04/44] NCR5380: Remove the NCR5380_CMD_SIZE macro Bart Van Assche
2022-02-08 19:22 ` Himanshu Madhani
2022-02-08 22:14 ` Finn Thain
2022-02-09 7:27 ` Hannes Reinecke
2022-02-08 17:24 ` [PATCH v2 05/44] NCR5380: Move the SCSI pointer to private command data Bart Van Assche
2022-02-08 19:48 ` Himanshu Madhani
2022-02-08 22:22 ` Finn Thain
2022-02-09 0:10 ` Bart Van Assche
2022-02-09 7:29 ` Hannes Reinecke
2022-02-09 17:58 ` Bart Van Assche
2022-02-08 17:24 ` [PATCH v2 06/44] scsi: arm: Rename arm/scsi.h into arm/arm_scsi.h Bart Van Assche
2022-02-08 19:49 ` Himanshu Madhani
2022-02-09 7:30 ` Hannes Reinecke
2022-02-08 17:24 ` [PATCH v2 07/44] scsi: arm: Move the SCSI pointer to private command data Bart Van Assche
2022-02-09 7:32 ` Hannes Reinecke
2022-02-09 17:49 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 08/44] 53c700: Stop clearing SCSI pointer fields Bart Van Assche
2022-02-08 19:58 ` Himanshu Madhani
2022-02-09 7:32 ` Hannes Reinecke
2022-02-08 17:24 ` [PATCH v2 09/44] aacraid: Move the SCSI pointer to private command data Bart Van Assche
2022-02-09 7:34 ` Hannes Reinecke
2022-02-09 17:47 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 10/44] advansys: " Bart Van Assche
2022-02-08 17:24 ` [PATCH v2 11/44] aha1542: Remove a set-but-not-used array Bart Van Assche
2022-02-09 7:35 ` Hannes Reinecke
2022-02-09 17:50 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 12/44] aha152x: Move the SCSI pointer to private command data Bart Van Assche
2022-02-09 7:35 ` Hannes Reinecke
2022-02-09 17:57 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 13/44] bfa: Stop using the SCSI pointer Bart Van Assche
2022-02-09 7:40 ` Hannes Reinecke
2022-02-09 18:19 ` Bart Van Assche
2022-02-10 7:29 ` Hannes Reinecke
2022-02-09 18:00 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 14/44] csio: " Bart Van Assche
2022-02-09 7:41 ` Hannes Reinecke
2022-02-09 18:03 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 15/44] dc395x: " Bart Van Assche
2022-02-09 7:42 ` Hannes Reinecke
2022-02-09 18:03 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 16/44] esp_scsi: " Bart Van Assche
2022-02-09 7:45 ` Hannes Reinecke
2022-02-09 18:04 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 17/44] fdomain: Move the SCSI pointer to private command data Bart Van Assche
2022-02-08 20:35 ` Himanshu Madhani
2022-02-09 7:46 ` Hannes Reinecke
2022-02-08 17:24 ` [PATCH v2 18/44] fnic: Fix a tracing statement Bart Van Assche
2022-02-09 7:46 ` Hannes Reinecke
2022-02-09 18:05 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 19/44] fnic: Stop using the SCSI pointer Bart Van Assche
2022-02-09 7:56 ` Hannes Reinecke
2022-02-09 18:22 ` Bart Van Assche
2022-02-10 7:30 ` Hannes Reinecke
2022-02-09 18:17 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 20/44] hptiop: " Bart Van Assche
2022-02-09 7:57 ` Hannes Reinecke
2022-02-09 18:24 ` Bart Van Assche
2022-02-10 7:32 ` Hannes Reinecke
2022-02-09 18:18 ` Himanshu Madhani
2022-02-08 17:24 ` Bart Van Assche [this message]
2022-02-09 7:58 ` [PATCH v2 21/44] imm: Move the SCSI pointer to private command data Hannes Reinecke
2022-02-09 18:27 ` Bart Van Assche
2022-02-10 7:42 ` Hannes Reinecke
2022-02-10 23:54 ` Bart Van Assche
2022-02-09 18:19 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 22/44] iscsi: Stop using the SCSI pointer Bart Van Assche
2022-02-09 7:59 ` Hannes Reinecke
2022-02-09 18:22 ` Himanshu Madhani
2022-02-09 19:55 ` Lee Duncan
2022-02-09 21:24 ` Mike Christie
2022-02-09 23:35 ` Chris Leech
2022-02-10 1:21 ` Bart Van Assche
2022-02-09 23:37 ` Chris Leech
2022-02-10 1:26 ` Bart Van Assche
2022-02-08 17:24 ` [PATCH v2 23/44] initio: " Bart Van Assche
2022-02-09 8:04 ` Hannes Reinecke
2022-02-09 18:24 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 24/44] libfc: " Bart Van Assche
2022-02-09 8:10 ` Hannes Reinecke
2022-02-09 18:33 ` Bart Van Assche
2022-02-09 18:28 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 25/44] mac53c94: Fix a set-but-not-used compiler warning Bart Van Assche
2022-02-09 8:10 ` Hannes Reinecke
2022-02-09 18:33 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 26/44] mac53c94: Move the SCSI pointer to private command data Bart Van Assche
2022-02-09 8:11 ` Hannes Reinecke
2022-02-09 18:35 ` Bart Van Assche
2022-02-10 7:52 ` Hannes Reinecke
2022-02-09 18:37 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 27/44] megaraid: Stop using the SCSI pointer Bart Van Assche
2022-02-09 8:14 ` Hannes Reinecke
2022-02-09 18:38 ` Bart Van Assche
2022-02-09 18:39 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 28/44] megasas: " Bart Van Assche
2022-02-09 8:16 ` Hannes Reinecke
2022-02-09 18:45 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 29/44] mesh: Move the SCSI pointer to private command data Bart Van Assche
2022-02-09 8:49 ` Hannes Reinecke
2022-02-09 18:42 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 30/44] mvsas: Fix a set-but-not-used warning Bart Van Assche
2022-02-08 17:50 ` John Garry
2022-02-09 0:19 ` Bart Van Assche
2022-02-09 8:49 ` Hannes Reinecke
2022-02-09 18:43 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 31/44] mvumi: Stop using the SCSI pointer Bart Van Assche
2022-02-09 8:18 ` Hannes Reinecke
2022-02-09 18:46 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 32/44] nsp32: " Bart Van Assche
2022-02-09 8:18 ` Hannes Reinecke
2022-02-09 8:19 ` Hannes Reinecke
2022-02-09 18:48 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 33/44] nsp_cs: Move the SCSI pointer to private command data Bart Van Assche
2022-02-09 8:20 ` Hannes Reinecke
2022-02-09 18:50 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 34/44] sym53c500_cs: " Bart Van Assche
2022-02-09 8:21 ` Hannes Reinecke
2022-02-09 18:56 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 35/44] ppa: " Bart Van Assche
2022-02-09 8:22 ` Hannes Reinecke
2022-02-09 18:56 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 36/44] qla1280: " Bart Van Assche
2022-02-09 8:22 ` Hannes Reinecke
2022-02-09 18:58 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 37/44] qla2xxx: Stop using the SCSI pointer Bart Van Assche
2022-02-08 18:38 ` Himanshu Madhani
2022-02-09 8:24 ` Hannes Reinecke
2022-02-09 10:11 ` Daniel Wagner
2022-02-08 17:25 ` [PATCH v2 38/44] smartpqi: " Bart Van Assche
2022-02-09 8:33 ` Hannes Reinecke
2022-02-09 18:59 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 39/44] sym53c8xx_2: Move the SCSI pointer to private command data Bart Van Assche
2022-02-09 8:34 ` Hannes Reinecke
2022-02-09 19:10 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 40/44] scsi: usb: Stop using the SCSI pointer Bart Van Assche
2022-02-09 8:35 ` Hannes Reinecke
2022-02-09 19:01 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 41/44] wd719x: " Bart Van Assche
2022-02-09 8:35 ` Hannes Reinecke
2022-02-09 19:04 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 42/44] wdc33c93: Move the SCSI pointer to private command data Bart Van Assche
2022-02-09 8:36 ` Hannes Reinecke
2022-02-09 19:10 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 43/44] zalon: Stop using the SCSI pointer Bart Van Assche
2022-02-09 8:36 ` Hannes Reinecke
2022-02-09 19:11 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 44/44] scsi: core: Remove struct scsi_pointer from struct scsi_cmnd Bart Van Assche
2022-02-08 17:54 ` John Garry
2022-02-09 0:24 ` Bart Van Assche
2022-02-08 19:22 ` Himanshu Madhani
2022-02-09 8:38 ` Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220208172514.3481-22-bvanassche@acm.org \
--to=bvanassche@acm.org \
--cc=jejb@linux.ibm.com \
--cc=johannes.thumshirn@wdc.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox