From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org, Bart Van Assche <bvanassche@acm.org>,
Johannes Thumshirn <johannes.thumshirn@wdc.com>,
"James E.J. Bottomley" <jejb@linux.ibm.com>
Subject: [PATCH v2 26/44] mac53c94: Move the SCSI pointer to private command data
Date: Tue, 8 Feb 2022 09:24:56 -0800 [thread overview]
Message-ID: <20220208172514.3481-27-bvanassche@acm.org> (raw)
In-Reply-To: <20220208172514.3481-1-bvanassche@acm.org>
Set .cmd_size in the SCSI host template instead of using the SCSI pointer
from struct scsi_cmnd. This patch prepares for removal of the SCSI pointer
from struct scsi_cmnd.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
drivers/scsi/mac53c94.c | 24 +++++++++++++-----------
drivers/scsi/mac53c94.h | 11 +++++++++++
2 files changed, 24 insertions(+), 11 deletions(-)
diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c
index afa08309de36..f3005b38931f 100644
--- a/drivers/scsi/mac53c94.c
+++ b/drivers/scsi/mac53c94.c
@@ -193,7 +193,8 @@ static void mac53c94_interrupt(int irq, void *dev_id)
struct fsc_state *state = (struct fsc_state *) dev_id;
struct mac53c94_regs __iomem *regs = state->regs;
struct dbdma_regs __iomem *dma = state->dma;
- struct scsi_cmnd *cmd = state->current_req;
+ struct scsi_cmnd *const cmd = state->current_req;
+ struct scsi_pointer *const scsi_pointer = mac53c94_scsi_pointer(cmd);
int nb, stat, seq, intr;
static int mac53c94_errors;
@@ -263,10 +264,10 @@ static void mac53c94_interrupt(int irq, void *dev_id)
/* set DMA controller going if any data to transfer */
if ((stat & (STAT_MSG|STAT_CD)) == 0
&& (scsi_sg_count(cmd) > 0 || scsi_bufflen(cmd))) {
- nb = cmd->SCp.this_residual;
+ nb = scsi_pointer->this_residual;
if (nb > 0xfff0)
nb = 0xfff0;
- cmd->SCp.this_residual -= nb;
+ scsi_pointer->this_residual -= nb;
writeb(nb, ®s->count_lo);
writeb(nb >> 8, ®s->count_mid);
writeb(CMD_DMA_MODE + CMD_NOP, ®s->command);
@@ -293,13 +294,13 @@ static void mac53c94_interrupt(int irq, void *dev_id)
cmd_done(state, DID_ERROR << 16);
return;
}
- if (cmd->SCp.this_residual != 0
+ if (scsi_pointer->this_residual != 0
&& (stat & (STAT_MSG|STAT_CD)) == 0) {
/* Set up the count regs to transfer more */
- nb = cmd->SCp.this_residual;
+ nb = scsi_pointer->this_residual;
if (nb > 0xfff0)
nb = 0xfff0;
- cmd->SCp.this_residual -= nb;
+ scsi_pointer->this_residual -= nb;
writeb(nb, ®s->count_lo);
writeb(nb >> 8, ®s->count_mid);
writeb(CMD_DMA_MODE + CMD_NOP, ®s->command);
@@ -321,8 +322,8 @@ static void mac53c94_interrupt(int irq, void *dev_id)
cmd_done(state, DID_ERROR << 16);
return;
}
- cmd->SCp.Status = readb(®s->fifo);
- cmd->SCp.Message = readb(®s->fifo);
+ scsi_pointer->Status = readb(®s->fifo);
+ scsi_pointer->Message = readb(®s->fifo);
writeb(CMD_ACCEPT_MSG, ®s->command);
state->phase = busfreeing;
break;
@@ -330,8 +331,8 @@ static void mac53c94_interrupt(int irq, void *dev_id)
if (intr != INTR_DISCONNECT) {
printk(KERN_DEBUG "got intr %x when expected disconnect\n", intr);
}
- cmd_done(state, (DID_OK << 16) + (cmd->SCp.Message << 8)
- + cmd->SCp.Status);
+ cmd_done(state, (DID_OK << 16) + (scsi_pointer->Message << 8)
+ + scsi_pointer->Status);
break;
default:
printk(KERN_DEBUG "don't know about phase %d\n", state->phase);
@@ -389,7 +390,7 @@ static void set_dma_cmds(struct fsc_state *state, struct scsi_cmnd *cmd)
dma_cmd += OUTPUT_LAST - OUTPUT_MORE;
dcmds[-1].command = cpu_to_le16(dma_cmd);
dcmds->command = cpu_to_le16(DBDMA_STOP);
- cmd->SCp.this_residual = total;
+ mac53c94_scsi_pointer(cmd)->this_residual = total;
}
static struct scsi_host_template mac53c94_template = {
@@ -401,6 +402,7 @@ static struct scsi_host_template mac53c94_template = {
.this_id = 7,
.sg_tablesize = SG_ALL,
.max_segment_size = 65535,
+ .cmd_size = sizeof(struct mac53c94_cmd_priv),
};
static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *match)
diff --git a/drivers/scsi/mac53c94.h b/drivers/scsi/mac53c94.h
index 5df6e81f78a8..37d7d30f42ef 100644
--- a/drivers/scsi/mac53c94.h
+++ b/drivers/scsi/mac53c94.h
@@ -212,4 +212,15 @@ struct mac53c94_regs {
#define CF4_TEST 0x02
#define CF4_BBTE 0x01
+struct mac53c94_cmd_priv {
+ struct scsi_pointer scsi_pointer;
+};
+
+static inline struct scsi_pointer *mac53c94_scsi_pointer(struct scsi_cmnd *cmd)
+{
+ struct mac53c94_cmd_priv *mcmd = scsi_cmd_priv(cmd);
+
+ return &mcmd->scsi_pointer;
+}
+
#endif /* _MAC53C94_H */
next prev parent reply other threads:[~2022-02-08 17:26 UTC|newest]
Thread overview: 168+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-08 17:24 [PATCH v2 00/44] Remove the SCSI pointer from struct scsi_cmnd Bart Van Assche
2022-02-08 17:24 ` [PATCH v2 01/44] ips: Use true and false instead of TRUE and FALSE Bart Van Assche
2022-02-08 18:04 ` John Garry
2022-02-09 0:04 ` Bart Van Assche
2022-02-09 9:06 ` John Garry
2022-02-08 20:00 ` Himanshu Madhani
2022-02-09 7:23 ` Hannes Reinecke
2022-02-08 17:24 ` [PATCH v2 02/44] nsp_cs: " Bart Van Assche
2022-02-08 19:22 ` Himanshu Madhani
2022-02-09 7:23 ` Hannes Reinecke
2022-02-09 9:11 ` John Garry
2022-02-08 17:24 ` [PATCH v2 03/44] scsi: Remove drivers/scsi/scsi.h Bart Van Assche
2022-02-08 19:22 ` Himanshu Madhani
2022-02-09 7:26 ` Hannes Reinecke
2022-02-09 17:39 ` Bart Van Assche
2022-02-09 8:55 ` Johannes Thumshirn
2022-02-09 9:17 ` John Garry
2022-02-09 18:21 ` John Garry
2022-02-08 17:24 ` [PATCH v2 04/44] NCR5380: Remove the NCR5380_CMD_SIZE macro Bart Van Assche
2022-02-08 19:22 ` Himanshu Madhani
2022-02-08 22:14 ` Finn Thain
2022-02-09 7:27 ` Hannes Reinecke
2022-02-08 17:24 ` [PATCH v2 05/44] NCR5380: Move the SCSI pointer to private command data Bart Van Assche
2022-02-08 19:48 ` Himanshu Madhani
2022-02-08 22:22 ` Finn Thain
2022-02-09 0:10 ` Bart Van Assche
2022-02-09 7:29 ` Hannes Reinecke
2022-02-09 17:58 ` Bart Van Assche
2022-02-08 17:24 ` [PATCH v2 06/44] scsi: arm: Rename arm/scsi.h into arm/arm_scsi.h Bart Van Assche
2022-02-08 19:49 ` Himanshu Madhani
2022-02-09 7:30 ` Hannes Reinecke
2022-02-08 17:24 ` [PATCH v2 07/44] scsi: arm: Move the SCSI pointer to private command data Bart Van Assche
2022-02-09 7:32 ` Hannes Reinecke
2022-02-09 17:49 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 08/44] 53c700: Stop clearing SCSI pointer fields Bart Van Assche
2022-02-08 19:58 ` Himanshu Madhani
2022-02-09 7:32 ` Hannes Reinecke
2022-02-08 17:24 ` [PATCH v2 09/44] aacraid: Move the SCSI pointer to private command data Bart Van Assche
2022-02-09 7:34 ` Hannes Reinecke
2022-02-09 17:47 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 10/44] advansys: " Bart Van Assche
2022-02-08 17:24 ` [PATCH v2 11/44] aha1542: Remove a set-but-not-used array Bart Van Assche
2022-02-09 7:35 ` Hannes Reinecke
2022-02-09 17:50 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 12/44] aha152x: Move the SCSI pointer to private command data Bart Van Assche
2022-02-09 7:35 ` Hannes Reinecke
2022-02-09 17:57 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 13/44] bfa: Stop using the SCSI pointer Bart Van Assche
2022-02-09 7:40 ` Hannes Reinecke
2022-02-09 18:19 ` Bart Van Assche
2022-02-10 7:29 ` Hannes Reinecke
2022-02-09 18:00 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 14/44] csio: " Bart Van Assche
2022-02-09 7:41 ` Hannes Reinecke
2022-02-09 18:03 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 15/44] dc395x: " Bart Van Assche
2022-02-09 7:42 ` Hannes Reinecke
2022-02-09 18:03 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 16/44] esp_scsi: " Bart Van Assche
2022-02-09 7:45 ` Hannes Reinecke
2022-02-09 18:04 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 17/44] fdomain: Move the SCSI pointer to private command data Bart Van Assche
2022-02-08 20:35 ` Himanshu Madhani
2022-02-09 7:46 ` Hannes Reinecke
2022-02-08 17:24 ` [PATCH v2 18/44] fnic: Fix a tracing statement Bart Van Assche
2022-02-09 7:46 ` Hannes Reinecke
2022-02-09 18:05 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 19/44] fnic: Stop using the SCSI pointer Bart Van Assche
2022-02-09 7:56 ` Hannes Reinecke
2022-02-09 18:22 ` Bart Van Assche
2022-02-10 7:30 ` Hannes Reinecke
2022-02-09 18:17 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 20/44] hptiop: " Bart Van Assche
2022-02-09 7:57 ` Hannes Reinecke
2022-02-09 18:24 ` Bart Van Assche
2022-02-10 7:32 ` Hannes Reinecke
2022-02-09 18:18 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 21/44] imm: Move the SCSI pointer to private command data Bart Van Assche
2022-02-09 7:58 ` Hannes Reinecke
2022-02-09 18:27 ` Bart Van Assche
2022-02-10 7:42 ` Hannes Reinecke
2022-02-10 23:54 ` Bart Van Assche
2022-02-09 18:19 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 22/44] iscsi: Stop using the SCSI pointer Bart Van Assche
2022-02-09 7:59 ` Hannes Reinecke
2022-02-09 18:22 ` Himanshu Madhani
2022-02-09 19:55 ` Lee Duncan
2022-02-09 21:24 ` Mike Christie
2022-02-09 23:35 ` Chris Leech
2022-02-10 1:21 ` Bart Van Assche
2022-02-09 23:37 ` Chris Leech
2022-02-10 1:26 ` Bart Van Assche
2022-02-08 17:24 ` [PATCH v2 23/44] initio: " Bart Van Assche
2022-02-09 8:04 ` Hannes Reinecke
2022-02-09 18:24 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 24/44] libfc: " Bart Van Assche
2022-02-09 8:10 ` Hannes Reinecke
2022-02-09 18:33 ` Bart Van Assche
2022-02-09 18:28 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 25/44] mac53c94: Fix a set-but-not-used compiler warning Bart Van Assche
2022-02-09 8:10 ` Hannes Reinecke
2022-02-09 18:33 ` Himanshu Madhani
2022-02-08 17:24 ` Bart Van Assche [this message]
2022-02-09 8:11 ` [PATCH v2 26/44] mac53c94: Move the SCSI pointer to private command data Hannes Reinecke
2022-02-09 18:35 ` Bart Van Assche
2022-02-10 7:52 ` Hannes Reinecke
2022-02-09 18:37 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 27/44] megaraid: Stop using the SCSI pointer Bart Van Assche
2022-02-09 8:14 ` Hannes Reinecke
2022-02-09 18:38 ` Bart Van Assche
2022-02-09 18:39 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 28/44] megasas: " Bart Van Assche
2022-02-09 8:16 ` Hannes Reinecke
2022-02-09 18:45 ` Himanshu Madhani
2022-02-08 17:24 ` [PATCH v2 29/44] mesh: Move the SCSI pointer to private command data Bart Van Assche
2022-02-09 8:49 ` Hannes Reinecke
2022-02-09 18:42 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 30/44] mvsas: Fix a set-but-not-used warning Bart Van Assche
2022-02-08 17:50 ` John Garry
2022-02-09 0:19 ` Bart Van Assche
2022-02-09 8:49 ` Hannes Reinecke
2022-02-09 18:43 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 31/44] mvumi: Stop using the SCSI pointer Bart Van Assche
2022-02-09 8:18 ` Hannes Reinecke
2022-02-09 18:46 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 32/44] nsp32: " Bart Van Assche
2022-02-09 8:18 ` Hannes Reinecke
2022-02-09 8:19 ` Hannes Reinecke
2022-02-09 18:48 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 33/44] nsp_cs: Move the SCSI pointer to private command data Bart Van Assche
2022-02-09 8:20 ` Hannes Reinecke
2022-02-09 18:50 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 34/44] sym53c500_cs: " Bart Van Assche
2022-02-09 8:21 ` Hannes Reinecke
2022-02-09 18:56 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 35/44] ppa: " Bart Van Assche
2022-02-09 8:22 ` Hannes Reinecke
2022-02-09 18:56 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 36/44] qla1280: " Bart Van Assche
2022-02-09 8:22 ` Hannes Reinecke
2022-02-09 18:58 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 37/44] qla2xxx: Stop using the SCSI pointer Bart Van Assche
2022-02-08 18:38 ` Himanshu Madhani
2022-02-09 8:24 ` Hannes Reinecke
2022-02-09 10:11 ` Daniel Wagner
2022-02-08 17:25 ` [PATCH v2 38/44] smartpqi: " Bart Van Assche
2022-02-09 8:33 ` Hannes Reinecke
2022-02-09 18:59 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 39/44] sym53c8xx_2: Move the SCSI pointer to private command data Bart Van Assche
2022-02-09 8:34 ` Hannes Reinecke
2022-02-09 19:10 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 40/44] scsi: usb: Stop using the SCSI pointer Bart Van Assche
2022-02-09 8:35 ` Hannes Reinecke
2022-02-09 19:01 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 41/44] wd719x: " Bart Van Assche
2022-02-09 8:35 ` Hannes Reinecke
2022-02-09 19:04 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 42/44] wdc33c93: Move the SCSI pointer to private command data Bart Van Assche
2022-02-09 8:36 ` Hannes Reinecke
2022-02-09 19:10 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 43/44] zalon: Stop using the SCSI pointer Bart Van Assche
2022-02-09 8:36 ` Hannes Reinecke
2022-02-09 19:11 ` Himanshu Madhani
2022-02-08 17:25 ` [PATCH v2 44/44] scsi: core: Remove struct scsi_pointer from struct scsi_cmnd Bart Van Assche
2022-02-08 17:54 ` John Garry
2022-02-09 0:24 ` Bart Van Assche
2022-02-08 19:22 ` Himanshu Madhani
2022-02-09 8:38 ` Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220208172514.3481-27-bvanassche@acm.org \
--to=bvanassche@acm.org \
--cc=jejb@linux.ibm.com \
--cc=johannes.thumshirn@wdc.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox