From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org, Bart Van Assche <bvanassche@acm.org>,
Christoph Hellwig <hch@lst.de>, Ming Lei <ming.lei@redhat.com>,
Hannes Reinecke <hare@suse.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Himanshu Madhani <himanshu.madhani@oracle.com>,
Johannes Thumshirn <johannes.thumshirn@wdc.com>,
"James E.J. Bottomley" <jejb@linux.ibm.com>,
"Juergen E. Fischer" <fischer@norbit.de>,
Russell King <linux@armlinux.org.uk>,
Adaptec OEM Raid Solutions <aacraid@microsemi.com>,
Kashyap Desai <kashyap.desai@broadcom.com>,
Sumit Saxena <sumit.saxena@broadcom.com>,
Shivasharan S <shivasharan.srikanteshwara@broadcom.com>,
Doug Gilbert <dgilbert@interlog.com>,
Oliver Neukum <oliver@neukum.org>,
Alan Stern <stern@rowland.harvard.edu>
Subject: [PATCH v3 06/48] scsi: Remove drivers/scsi/scsi.h
Date: Fri, 11 Feb 2022 14:32:05 -0800 [thread overview]
Message-ID: <20220211223247.14369-7-bvanassche@acm.org> (raw)
In-Reply-To: <20220211223247.14369-1-bvanassche@acm.org>
The following two header files have the same file name: include/scsi/scsi.h
and drivers/scsi/scsi.h. This is confusing. Remove the latter since the
following note was added in drivers/scsi/scsi.h in 2004:
"NOTE: this file only contains compatibility glue for old drivers. All
these wrappers will be removed sooner or later. For new code please use
the interfaces declared in the headers in include/scsi/"
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
drivers/scsi/a2091.c | 6 +++-
drivers/scsi/a3000.c | 6 +++-
drivers/scsi/aha152x.c | 9 ++++--
drivers/scsi/aha1740.c | 6 +++-
drivers/scsi/arm/acornscsi.c | 6 +++-
drivers/scsi/arm/arxescsi.c | 6 +++-
drivers/scsi/arm/cumana_2.c | 6 +++-
drivers/scsi/arm/eesox.c | 6 +++-
drivers/scsi/arm/fas216.c | 6 +++-
drivers/scsi/arm/powertec.c | 6 +++-
drivers/scsi/arm/queue.c | 6 +++-
drivers/scsi/gvp11.c | 6 +++-
drivers/scsi/ips.c | 8 ++++--
drivers/scsi/megaraid.c | 8 ++++--
drivers/scsi/mvme147.c | 6 +++-
drivers/scsi/pcmcia/aha152x_stub.c | 9 ++++--
drivers/scsi/pcmcia/nsp_cs.c | 5 ++--
drivers/scsi/pcmcia/qlogic_stub.c | 9 ++++--
drivers/scsi/qlogicfas.c | 6 +++-
drivers/scsi/qlogicfas408.c | 6 +++-
drivers/scsi/scsi.h | 46 ------------------------------
drivers/scsi/sg.c | 8 ++++--
drivers/scsi/sgiwd93.c | 6 +++-
drivers/usb/image/microtek.c | 8 ++++--
drivers/usb/storage/debug.c | 1 -
25 files changed, 119 insertions(+), 82 deletions(-)
delete mode 100644 drivers/scsi/scsi.h
diff --git a/drivers/scsi/a2091.c b/drivers/scsi/a2091.c
index 5853db36eceb..bcbce23478b8 100644
--- a/drivers/scsi/a2091.c
+++ b/drivers/scsi/a2091.c
@@ -12,7 +12,11 @@
#include <asm/amigaints.h>
#include <asm/amigahw.h>
-#include "scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_tcq.h>
#include "wd33c93.h"
#include "a2091.h"
diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c
index 86f1da22aaa5..23f34411f7bf 100644
--- a/drivers/scsi/a3000.c
+++ b/drivers/scsi/a3000.c
@@ -13,7 +13,11 @@
#include <asm/amigaints.h>
#include <asm/amigahw.h>
-#include "scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_tcq.h>
#include "wd33c93.h"
#include "a3000.h"
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index d17880b57d17..901b78e8ffe6 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -243,13 +243,16 @@
#include <linux/workqueue.h>
#include <linux/list.h>
#include <linux/slab.h>
-#include <scsi/scsicam.h>
-#include "scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
#include <scsi/scsi_transport_spi.h>
-#include <scsi/scsi_eh.h>
+#include <scsi/scsicam.h>
#include "aha152x.h"
static LIST_HEAD(aha152x_host_list);
diff --git a/drivers/scsi/aha1740.c b/drivers/scsi/aha1740.c
index 18eb4cfcef9a..134255751819 100644
--- a/drivers/scsi/aha1740.c
+++ b/drivers/scsi/aha1740.c
@@ -55,8 +55,12 @@
#include <asm/dma.h>
#include <asm/io.h>
-#include "scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
#include "aha1740.h"
/* IF YOU ARE HAVING PROBLEMS WITH THIS DRIVER, AND WANT TO WATCH
diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c
index 81eb3bbdfc51..a8a72d822862 100644
--- a/drivers/scsi/arm/acornscsi.c
+++ b/drivers/scsi/arm/acornscsi.c
@@ -126,9 +126,13 @@
#include <asm/ecard.h>
-#include "../scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
#include <scsi/scsi_transport_spi.h>
#include "acornscsi.h"
#include "msgqueue.h"
diff --git a/drivers/scsi/arm/arxescsi.c b/drivers/scsi/arm/arxescsi.c
index 7f667c198f6d..2527b542bcdd 100644
--- a/drivers/scsi/arm/arxescsi.c
+++ b/drivers/scsi/arm/arxescsi.c
@@ -35,8 +35,12 @@
#include <asm/io.h>
#include <asm/ecard.h>
-#include "../scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
#include "fas216.h"
struct arxescsi_info {
diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c
index 3c00d7773876..536d6646e40b 100644
--- a/drivers/scsi/arm/cumana_2.c
+++ b/drivers/scsi/arm/cumana_2.c
@@ -29,8 +29,12 @@
#include <asm/ecard.h>
#include <asm/io.h>
-#include "../scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
#include "fas216.h"
#include "scsi.h"
diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c
index 1394590eecea..ab0f6422a6a9 100644
--- a/drivers/scsi/arm/eesox.c
+++ b/drivers/scsi/arm/eesox.c
@@ -35,8 +35,12 @@
#include <asm/dma.h>
#include <asm/ecard.h>
-#include "../scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
#include "fas216.h"
#include "scsi.h"
diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index 7019b91f0ce6..0d6df5ebf934 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -47,9 +47,13 @@
#include <asm/irq.h>
#include <asm/ecard.h>
-#include "../scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
#include "fas216.h"
#include "scsi.h"
diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c
index 8fec435cee18..797568b271e3 100644
--- a/drivers/scsi/arm/powertec.c
+++ b/drivers/scsi/arm/powertec.c
@@ -20,8 +20,12 @@
#include <asm/ecard.h>
#include <asm/io.h>
-#include "../scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
#include "fas216.h"
#include "scsi.h"
diff --git a/drivers/scsi/arm/queue.c b/drivers/scsi/arm/queue.c
index c6f71a7d1b8e..978df23ce188 100644
--- a/drivers/scsi/arm/queue.c
+++ b/drivers/scsi/arm/queue.c
@@ -20,7 +20,11 @@
#include <linux/list.h>
#include <linux/init.h>
-#include "../scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_tcq.h>
#define DEBUG
diff --git a/drivers/scsi/gvp11.c b/drivers/scsi/gvp11.c
index 727f8c8f30b5..43754c2f36b3 100644
--- a/drivers/scsi/gvp11.c
+++ b/drivers/scsi/gvp11.c
@@ -12,7 +12,11 @@
#include <asm/amigaints.h>
#include <asm/amigahw.h>
-#include "scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_tcq.h>
#include "wd33c93.h"
#include "gvp11.h"
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index d22ba53d6028..16419aeec02d 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -180,9 +180,13 @@
#include <linux/types.h>
#include <linux/dma-mapping.h>
-#include <scsi/sg.h>
-#include "scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/sg.h>
#include "ips.h"
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index bf987f3a7f3f..2061e3fe9824 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -44,10 +44,14 @@
#include <linux/dma-mapping.h>
#include <linux/mutex.h>
#include <linux/slab.h>
-#include <scsi/scsicam.h>
-#include "scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsicam.h>
#include "megaraid.h"
diff --git a/drivers/scsi/mvme147.c b/drivers/scsi/mvme147.c
index 869b8b058a43..0893d4c3a916 100644
--- a/drivers/scsi/mvme147.c
+++ b/drivers/scsi/mvme147.c
@@ -11,8 +11,12 @@
#include <asm/mvme147hw.h>
#include <asm/irq.h>
-#include "scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
#include "wd33c93.h"
#include "mvme147.h"
diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c
index df82a349e969..6a6621728c69 100644
--- a/drivers/scsi/pcmcia/aha152x_stub.c
+++ b/drivers/scsi/pcmcia/aha152x_stub.c
@@ -40,13 +40,16 @@
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/ioport.h>
-#include <scsi/scsi.h>
#include <linux/major.h>
#include <linux/blkdev.h>
-#include <scsi/scsi_ioctl.h>
-#include "scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_ioctl.h>
+#include <scsi/scsi_tcq.h>
#include "aha152x.h"
#include <pcmcia/cistpl.h>
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index a78a86511e94..dcffda384eaf 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -41,10 +41,9 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <../drivers/scsi/scsi.h>
-#include <scsi/scsi_host.h>
-
#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_host.h>
#include <scsi/scsi_ioctl.h>
#include <pcmcia/cistpl.h>
diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c
index 828d53faf09a..310d0b6586a6 100644
--- a/drivers/scsi/pcmcia/qlogic_stub.c
+++ b/drivers/scsi/pcmcia/qlogic_stub.c
@@ -38,14 +38,17 @@
#include <linux/string.h>
#include <linux/ioport.h>
#include <asm/io.h>
-#include <scsi/scsi.h>
#include <linux/major.h>
#include <linux/blkdev.h>
-#include <scsi/scsi_ioctl.h>
#include <linux/interrupt.h>
-#include "scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_ioctl.h>
+#include <scsi/scsi_tcq.h>
#include "../qlogicfas408.h"
#include <pcmcia/cistpl.h>
diff --git a/drivers/scsi/qlogicfas.c b/drivers/scsi/qlogicfas.c
index 8f709002f746..8f05e3707d69 100644
--- a/drivers/scsi/qlogicfas.c
+++ b/drivers/scsi/qlogicfas.c
@@ -31,8 +31,12 @@
#include <asm/irq.h>
#include <asm/dma.h>
-#include "scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
#include "qlogicfas408.h"
/* Set the following to 2 to use normal interrupt (active high/totempole-
diff --git a/drivers/scsi/qlogicfas408.c b/drivers/scsi/qlogicfas408.c
index 30a88849a626..3e065d5fc80c 100644
--- a/drivers/scsi/qlogicfas408.c
+++ b/drivers/scsi/qlogicfas408.c
@@ -55,8 +55,12 @@
#include <asm/irq.h>
#include <asm/dma.h>
-#include "scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
#include "qlogicfas408.h"
/*----------------------------------------------------------------*/
diff --git a/drivers/scsi/scsi.h b/drivers/scsi/scsi.h
deleted file mode 100644
index 4fd75a3aff66..000000000000
--- a/drivers/scsi/scsi.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * scsi.h Copyright (C) 1992 Drew Eckhardt
- * Copyright (C) 1993, 1994, 1995, 1998, 1999 Eric Youngdale
- * generic SCSI package header file by
- * Initial versions: Drew Eckhardt
- * Subsequent revisions: Eric Youngdale
- *
- * <drew@colorado.edu>
- *
- * Modified by Eric Youngdale eric@andante.org to
- * add scatter-gather, multiple outstanding request, and other
- * enhancements.
- */
-/*
- * NOTE: this file only contains compatibility glue for old drivers. All
- * these wrappers will be removed sooner or later. For new code please use
- * the interfaces declared in the headers in include/scsi/
- */
-
-#ifndef _SCSI_H
-#define _SCSI_H
-
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_eh.h>
-#include <scsi/scsi_tcq.h>
-#include <scsi/scsi.h>
-
-/*
- * Some defs, in case these are not defined elsewhere.
- */
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-struct Scsi_Host;
-struct scsi_cmnd;
-struct scsi_device;
-struct scsi_target;
-struct scatterlist;
-
-#endif /* _SCSI_H */
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 6b43e97bd417..bbd75026ec93 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -49,11 +49,15 @@ static int sg_version_num = 30536; /* 2 digits for each component */
#include <linux/uio.h>
#include <linux/cred.h> /* for sg_check_file_access() */
-#include "scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_dbg.h>
-#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
#include <scsi/scsi_driver.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_host.h>
#include <scsi/scsi_ioctl.h>
+#include <scsi/scsi_tcq.h>
#include <scsi/sg.h>
#include "scsi_logging.h"
diff --git a/drivers/scsi/sgiwd93.c b/drivers/scsi/sgiwd93.c
index cf1030c9dda1..e797d89c873b 100644
--- a/drivers/scsi/sgiwd93.c
+++ b/drivers/scsi/sgiwd93.c
@@ -28,7 +28,11 @@
#include <asm/sgi/ip22.h>
#include <asm/sgi/wd.h>
-#include "scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_tcq.h>
#include "wd33c93.h"
struct ip22_hostdata {
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index b8dc6fa6a5a3..874ea4b54ced 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -130,11 +130,15 @@
#include <linux/spinlock.h>
#include <linux/usb.h>
#include <linux/proc_fs.h>
-
#include <linux/atomic.h>
#include <linux/blkdev.h>
-#include "../../scsi/scsi.h"
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
#include "microtek.h"
diff --git a/drivers/usb/storage/debug.c b/drivers/usb/storage/debug.c
index d7f50b7a079e..576be66ad962 100644
--- a/drivers/usb/storage/debug.c
+++ b/drivers/usb/storage/debug.c
@@ -36,7 +36,6 @@
#include "usb.h"
#include "debug.h"
-#include "scsi.h"
void usb_stor_show_command(const struct us_data *us, struct scsi_cmnd *srb)
next prev parent reply other threads:[~2022-02-11 22:33 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-11 22:31 [PATCH v3 00/48] Remove the SCSI pointer from struct scsi_cmnd Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 01/48] scsi: ips: Remove an unreachable statement Bart Van Assche
2022-02-14 9:40 ` Hannes Reinecke
2022-02-14 19:59 ` Himanshu Madhani
2022-02-11 22:32 ` [PATCH v3 02/48] scsi: ips: Change the return type of ips_release() into 'void' Bart Van Assche
2022-02-14 9:43 ` Hannes Reinecke
2022-02-15 1:33 ` Bart Van Assche
2022-02-14 20:01 ` Himanshu Madhani
2022-02-11 22:32 ` [PATCH v3 03/48] scsi: ips: Use true and false instead of TRUE and FALSE Bart Van Assche
2022-02-14 9:43 ` Hannes Reinecke
2022-02-14 20:02 ` Himanshu Madhani
2022-02-11 22:32 ` [PATCH v3 04/48] scsi: nsp_cs: Change the return type of two functions into 'void' Bart Van Assche
2022-02-14 9:44 ` Hannes Reinecke
2022-02-14 20:04 ` Himanshu Madhani
2022-02-11 22:32 ` [PATCH v3 05/48] scsi: nsp_cs: Use true and false instead of TRUE and FALSE Bart Van Assche
2022-02-14 9:44 ` Hannes Reinecke
2022-02-14 20:05 ` Himanshu Madhani
2022-02-11 22:32 ` Bart Van Assche [this message]
2022-02-14 9:45 ` [PATCH v3 06/48] scsi: Remove drivers/scsi/scsi.h Hannes Reinecke
2022-02-11 22:32 ` [PATCH v3 07/48] scsi: NCR5380: Remove the NCR5380_CMD_SIZE macro Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 08/48] scsi: NCR5380: Introduce the NCR5380_cmd_priv() function Bart Van Assche
2022-02-14 9:46 ` Hannes Reinecke
2022-02-14 20:09 ` Himanshu Madhani
2022-02-11 22:32 ` [PATCH v3 09/48] scsi: NCR5380: Move the SCSI pointer to private command data Bart Van Assche
2022-02-14 9:47 ` Hannes Reinecke
2022-02-11 22:32 ` [PATCH v3 10/48] scsi: arm: Rename arm/scsi.h into arm/arm_scsi.h Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 11/48] scsi: arm: Move the SCSI pointer to private command data Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 12/48] scsi: 53c700: Stop clearing SCSI pointer fields Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 13/48] scsi: aacraid: Move the SCSI pointer to private command data Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 14/48] scsi: advansys: " Bart Van Assche
2022-02-14 9:54 ` Hannes Reinecke
2022-02-11 22:32 ` [PATCH v3 15/48] scsi: aha1542: Remove a set-but-not-used array Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 16/48] scsi: aha152x: Move the SCSI pointer to private command data Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 17/48] scsi: bfa: Stop using the SCSI pointer Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 18/48] scsi: csio: " Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 19/48] scsi: dc395x: " Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 20/48] scsi: esp_scsi: " Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 21/48] scsi: fdomain: Move the SCSI pointer to private command data Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 22/48] scsi: fnic: Fix a tracing statement Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 23/48] scsi: fnic: Stop using the SCSI pointer Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 24/48] scsi: hptiop: " Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 25/48] scsi: imm: Move the SCSI pointer to private command data Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 26/48] scsi: iscsi: Stop using the SCSI pointer Bart Van Assche
2022-02-13 22:12 ` Lee Duncan
2022-02-14 9:57 ` Hannes Reinecke
2022-02-14 20:12 ` Himanshu Madhani
2022-02-11 22:32 ` [PATCH v3 27/48] scsi: initio: " Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 28/48] scsi: libfc: " Bart Van Assche
2022-02-14 11:55 ` Hannes Reinecke
2022-02-15 3:00 ` Bart Van Assche
2022-02-15 7:02 ` Hannes Reinecke
2022-02-16 20:09 ` Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 29/48] scsi: mac53c94: Fix a set-but-not-used compiler warning Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 30/48] scsi: mac53c94: Move the SCSI pointer to private command data Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 31/48] scsi: megaraid: Stop using the SCSI pointer Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 32/48] scsi: megasas: " Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 33/48] scsi: mesh: Move the SCSI pointer to private command data Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 34/48] scsi: mvsas: Fix a set-but-not-used warning Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 35/48] scsi: mvumi: Stop using the SCSI pointer Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 36/48] scsi: nsp32: " Bart Van Assche
2022-02-14 4:02 ` Masanori Goto
2022-02-11 22:32 ` [PATCH v3 37/48] scsi: nsp_cs: Move the SCSI pointer to private command data Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 38/48] scsi: sym53c500_cs: " Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 39/48] scsi: ppa: " Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 40/48] scsi: qla1280: " Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 41/48] scsi: qla2xxx: Stop using the SCSI pointer Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 42/48] scsi: smartpqi: " Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 43/48] scsi: sym53c8xx_2: Move the SCSI pointer to private command data Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 44/48] scsi: usb: Stop using the SCSI pointer Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 45/48] scsi: wd719x: " Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 46/48] scsi: wd33c93: Move the SCSI pointer to private command data Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 47/48] scsi: zalon: Stop using the SCSI pointer Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 48/48] scsi: core: Remove struct scsi_pointer from struct scsi_cmnd Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220211223247.14369-7-bvanassche@acm.org \
--to=bvanassche@acm.org \
--cc=aacraid@microsemi.com \
--cc=dgilbert@interlog.com \
--cc=fischer@norbit.de \
--cc=gregkh@linuxfoundation.org \
--cc=hare@suse.com \
--cc=hch@lst.de \
--cc=himanshu.madhani@oracle.com \
--cc=jejb@linux.ibm.com \
--cc=johannes.thumshirn@wdc.com \
--cc=kashyap.desai@broadcom.com \
--cc=linux-scsi@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=martin.petersen@oracle.com \
--cc=ming.lei@redhat.com \
--cc=oliver@neukum.org \
--cc=shivasharan.srikanteshwara@broadcom.com \
--cc=stern@rowland.harvard.edu \
--cc=sumit.saxena@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox