[PATCH AUTOSEL 5.10 13/23] scsi: lpfc: Remove NVMe support if kernel has NVME_FC disabled

[PATCH AUTOSEL 5.10 13/23] scsi: lpfc: Remove NVMe support if kernel has NVME_FC disabled

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit c80b27cfd93ba9f5161383f798414609e84729f3 ]

The driver is initiating NVMe PRLIs to determine device NVMe support.  This
should not be occurring if CONFIG_NVME_FC support is disabled.

Correct this by changing the default value for FC4 support. Currently it
defaults to FCP and NVMe. With change, when NVME_FC support is not enabled
in the kernel, the default value is just FCP.

Link: https://lore.kernel.org/r/20220207180516.73052-1-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc.h      | 13 ++++++++++---
 drivers/scsi/lpfc/lpfc_attr.c |  4 ++--
 2 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 0273bf3918ff3..d1894539efc30 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -898,6 +898,16 @@ struct lpfc_hba {
 	uint32_t cfg_hostmem_hgp;
 	uint32_t cfg_log_verbose;
 	uint32_t cfg_enable_fc4_type;
+#define LPFC_ENABLE_FCP  1
+#define LPFC_ENABLE_NVME 2
+#define LPFC_ENABLE_BOTH 3
+#if (IS_ENABLED(CONFIG_NVME_FC))
+#define LPFC_MAX_ENBL_FC4_TYPE LPFC_ENABLE_BOTH
+#define LPFC_DEF_ENBL_FC4_TYPE LPFC_ENABLE_BOTH
+#else
+#define LPFC_MAX_ENBL_FC4_TYPE LPFC_ENABLE_FCP
+#define LPFC_DEF_ENBL_FC4_TYPE LPFC_ENABLE_FCP
+#endif
 	uint32_t cfg_aer_support;
 	uint32_t cfg_sriov_nr_virtfn;
 	uint32_t cfg_request_firmware_upgrade;
@@ -918,9 +928,6 @@ struct lpfc_hba {
 	uint32_t cfg_ras_fwlog_func;
 	uint32_t cfg_enable_bbcr;	/* Enable BB Credit Recovery */
 	uint32_t cfg_enable_dpp;	/* Enable Direct Packet Push */
-#define LPFC_ENABLE_FCP  1
-#define LPFC_ENABLE_NVME 2
-#define LPFC_ENABLE_BOTH 3
 	uint32_t cfg_enable_pbde;
 	struct nvmet_fc_target_port *targetport;
 	lpfc_vpd_t vpd;		/* vital product data */
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 727b7ba4d8f82..b73d5d9494021 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -3797,8 +3797,8 @@ LPFC_ATTR_R(nvmet_mrq_post,
  *                    3 - register both FCP and NVME
  * Supported values are [1,3]. Default value is 3
  */
-LPFC_ATTR_R(enable_fc4_type, LPFC_ENABLE_BOTH,
-	    LPFC_ENABLE_FCP, LPFC_ENABLE_BOTH,
+LPFC_ATTR_R(enable_fc4_type, LPFC_DEF_ENBL_FC4_TYPE,
+	    LPFC_ENABLE_FCP, LPFC_MAX_ENBL_FC4_TYPE,
 	    "Enable FC4 Protocol support - FCP / NVME");
 
 /*
-- 
2.34.1

[PATCH AUTOSEL 5.10 14/23] scsi: lpfc: Reduce log messages seen after firmware download

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 5852ed2a6a39c862c8a3fdf646e1f4e01b91d710 ]

Messages around firmware download were incorrectly tagged as being related
to discovery trace events. Thus, firmware download status ended up dumping
the trace log as well as the firmware update message. As there were a
couple of log messages in this state, the trace log was dumped multiple
times.

Resolve this by converting from trace events to SLI events.

Link: https://lore.kernel.org/r/20220207180442.72836-1-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_init.c | 2 +-
 drivers/scsi/lpfc/lpfc_sli.c  | 8 +++++++-
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 37612299a34a1..1149bfc42fe64 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1998,7 +1998,7 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
 		}
 		if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 &&
 		    reg_err2 == SLIPORT_ERR2_REG_FW_RESTART) {
-			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 					"3143 Port Down: Firmware Update "
 					"Detected\n");
 			en_rn_msg = false;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 1a9522baba484..4587127b67f7b 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -12402,6 +12402,7 @@ lpfc_sli4_eratt_read(struct lpfc_hba *phba)
 	uint32_t uerr_sta_hi, uerr_sta_lo;
 	uint32_t if_type, portsmphr;
 	struct lpfc_register portstat_reg;
+	u32 logmask;
 
 	/*
 	 * For now, use the SLI4 device internal unrecoverable error
@@ -12452,7 +12453,12 @@ lpfc_sli4_eratt_read(struct lpfc_hba *phba)
 				readl(phba->sli4_hba.u.if_type2.ERR1regaddr);
 			phba->work_status[1] =
 				readl(phba->sli4_hba.u.if_type2.ERR2regaddr);
-			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			logmask = LOG_TRACE_EVENT;
+			if (phba->work_status[0] ==
+				SLIPORT_ERR1_REG_ERR_CODE_2 &&
+			    phba->work_status[1] == SLIPORT_ERR2_REG_FW_RESTART)
+				logmask = LOG_SLI;
+			lpfc_printf_log(phba, KERN_ERR, logmask,
 					"2885 Port Status Event: "
 					"port status reg 0x%x, "
 					"port smphr reg 0x%x, "
-- 
2.34.1