From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org, Bart Van Assche <bvanassche@acm.org>,
Johannes Thumshirn <johannes.thumshirn@wdc.com>,
Himanshu Madhani <himanshu.madhani@oracle.com>,
Hannes Reinecke <hare@suse.de>,
"James E.J. Bottomley" <jejb@linux.ibm.com>
Subject: [PATCH v4 21/50] scsi: fdomain: Move the SCSI pointer to private command data
Date: Wed, 16 Feb 2022 13:02:04 -0800 [thread overview]
Message-ID: <20220216210233.28774-22-bvanassche@acm.org> (raw)
In-Reply-To: <20220216210233.28774-1-bvanassche@acm.org>
Set .cmd_size in the SCSI host template instead of using the SCSI pointer
from struct scsi_cmnd. This patch prepares for removal of the SCSI pointer
from struct scsi_cmnd.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
drivers/scsi/fdomain.c | 64 ++++++++++++++++++++++++------------------
1 file changed, 36 insertions(+), 28 deletions(-)
diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c
index 9159b4057c5d..444eac9b2466 100644
--- a/drivers/scsi/fdomain.c
+++ b/drivers/scsi/fdomain.c
@@ -115,6 +115,11 @@ struct fdomain {
struct work_struct work;
};
+static struct scsi_pointer *fdomain_scsi_pointer(struct scsi_cmnd *cmd)
+{
+ return scsi_cmd_priv(cmd);
+}
+
static inline void fdomain_make_bus_idle(struct fdomain *fd)
{
outb(0, fd->base + REG_BCTL);
@@ -263,20 +268,21 @@ static void fdomain_work(struct work_struct *work)
struct Scsi_Host *sh = container_of((void *)fd, struct Scsi_Host,
hostdata);
struct scsi_cmnd *cmd = fd->cur_cmd;
+ struct scsi_pointer *scsi_pointer = fdomain_scsi_pointer(cmd);
unsigned long flags;
int status;
int done = 0;
spin_lock_irqsave(sh->host_lock, flags);
- if (cmd->SCp.phase & in_arbitration) {
+ if (scsi_pointer->phase & in_arbitration) {
status = inb(fd->base + REG_ASTAT);
if (!(status & ASTAT_ARB)) {
set_host_byte(cmd, DID_BUS_BUSY);
fdomain_finish_cmd(fd);
goto out;
}
- cmd->SCp.phase = in_selection;
+ scsi_pointer->phase = in_selection;
outb(ICTL_SEL | FIFO_COUNT, fd->base + REG_ICTL);
outb(BCTL_BUSEN | BCTL_SEL, fd->base + REG_BCTL);
@@ -285,7 +291,7 @@ static void fdomain_work(struct work_struct *work)
/* Stop arbitration and enable parity */
outb(ACTL_IRQEN | PARITY_MASK, fd->base + REG_ACTL);
goto out;
- } else if (cmd->SCp.phase & in_selection) {
+ } else if (scsi_pointer->phase & in_selection) {
status = inb(fd->base + REG_BSTAT);
if (!(status & BSTAT_BSY)) {
/* Try again, for slow devices */
@@ -297,75 +303,75 @@ static void fdomain_work(struct work_struct *work)
/* Stop arbitration and enable parity */
outb(ACTL_IRQEN | PARITY_MASK, fd->base + REG_ACTL);
}
- cmd->SCp.phase = in_other;
+ scsi_pointer->phase = in_other;
outb(ICTL_FIFO | ICTL_REQ | FIFO_COUNT, fd->base + REG_ICTL);
outb(BCTL_BUSEN, fd->base + REG_BCTL);
goto out;
}
- /* cur_cmd->SCp.phase == in_other: this is the body of the routine */
+ /* fdomain_scsi_pointer(cur_cmd)->phase == in_other: this is the body of the routine */
status = inb(fd->base + REG_BSTAT);
if (status & BSTAT_REQ) {
switch (status & (BSTAT_MSG | BSTAT_CMD | BSTAT_IO)) {
case BSTAT_CMD: /* COMMAND OUT */
- outb(cmd->cmnd[cmd->SCp.sent_command++],
+ outb(cmd->cmnd[scsi_pointer->sent_command++],
fd->base + REG_SCSI_DATA);
break;
case 0: /* DATA OUT -- tmc18c50/tmc18c30 only */
- if (fd->chip != tmc1800 && !cmd->SCp.have_data_in) {
- cmd->SCp.have_data_in = -1;
+ if (fd->chip != tmc1800 && !scsi_pointer->have_data_in) {
+ scsi_pointer->have_data_in = -1;
outb(ACTL_IRQEN | ACTL_FIFOWR | ACTL_FIFOEN |
PARITY_MASK, fd->base + REG_ACTL);
}
break;
case BSTAT_IO: /* DATA IN -- tmc18c50/tmc18c30 only */
- if (fd->chip != tmc1800 && !cmd->SCp.have_data_in) {
- cmd->SCp.have_data_in = 1;
+ if (fd->chip != tmc1800 && !scsi_pointer->have_data_in) {
+ scsi_pointer->have_data_in = 1;
outb(ACTL_IRQEN | ACTL_FIFOEN | PARITY_MASK,
fd->base + REG_ACTL);
}
break;
case BSTAT_CMD | BSTAT_IO: /* STATUS IN */
- cmd->SCp.Status = inb(fd->base + REG_SCSI_DATA);
+ scsi_pointer->Status = inb(fd->base + REG_SCSI_DATA);
break;
case BSTAT_MSG | BSTAT_CMD: /* MESSAGE OUT */
outb(MESSAGE_REJECT, fd->base + REG_SCSI_DATA);
break;
case BSTAT_MSG | BSTAT_CMD | BSTAT_IO: /* MESSAGE IN */
- cmd->SCp.Message = inb(fd->base + REG_SCSI_DATA);
- if (cmd->SCp.Message == COMMAND_COMPLETE)
+ scsi_pointer->Message = inb(fd->base + REG_SCSI_DATA);
+ if (scsi_pointer->Message == COMMAND_COMPLETE)
++done;
break;
}
}
- if (fd->chip == tmc1800 && !cmd->SCp.have_data_in &&
- cmd->SCp.sent_command >= cmd->cmd_len) {
+ if (fd->chip == tmc1800 && !scsi_pointer->have_data_in &&
+ scsi_pointer->sent_command >= cmd->cmd_len) {
if (cmd->sc_data_direction == DMA_TO_DEVICE) {
- cmd->SCp.have_data_in = -1;
+ scsi_pointer->have_data_in = -1;
outb(ACTL_IRQEN | ACTL_FIFOWR | ACTL_FIFOEN |
PARITY_MASK, fd->base + REG_ACTL);
} else {
- cmd->SCp.have_data_in = 1;
+ scsi_pointer->have_data_in = 1;
outb(ACTL_IRQEN | ACTL_FIFOEN | PARITY_MASK,
fd->base + REG_ACTL);
}
}
- if (cmd->SCp.have_data_in == -1) /* DATA OUT */
+ if (scsi_pointer->have_data_in == -1) /* DATA OUT */
fdomain_write_data(cmd);
- if (cmd->SCp.have_data_in == 1) /* DATA IN */
+ if (scsi_pointer->have_data_in == 1) /* DATA IN */
fdomain_read_data(cmd);
if (done) {
- set_status_byte(cmd, cmd->SCp.Status);
+ set_status_byte(cmd, scsi_pointer->Status);
set_host_byte(cmd, DID_OK);
- scsi_msg_to_host_byte(cmd, cmd->SCp.Message);
+ scsi_msg_to_host_byte(cmd, scsi_pointer->Message);
fdomain_finish_cmd(fd);
} else {
- if (cmd->SCp.phase & disconnect) {
+ if (scsi_pointer->phase & disconnect) {
outb(ICTL_FIFO | ICTL_SEL | ICTL_REQ | FIFO_COUNT,
fd->base + REG_ICTL);
outb(0, fd->base + REG_BCTL);
@@ -398,14 +404,15 @@ static irqreturn_t fdomain_irq(int irq, void *dev_id)
static int fdomain_queue(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
{
+ struct scsi_pointer *scsi_pointer = fdomain_scsi_pointer(cmd);
struct fdomain *fd = shost_priv(cmd->device->host);
unsigned long flags;
- cmd->SCp.Status = 0;
- cmd->SCp.Message = 0;
- cmd->SCp.have_data_in = 0;
- cmd->SCp.sent_command = 0;
- cmd->SCp.phase = in_arbitration;
+ scsi_pointer->Status = 0;
+ scsi_pointer->Message = 0;
+ scsi_pointer->have_data_in = 0;
+ scsi_pointer->sent_command = 0;
+ scsi_pointer->phase = in_arbitration;
scsi_set_resid(cmd, scsi_bufflen(cmd));
spin_lock_irqsave(sh->host_lock, flags);
@@ -440,7 +447,7 @@ static int fdomain_abort(struct scsi_cmnd *cmd)
spin_lock_irqsave(sh->host_lock, flags);
fdomain_make_bus_idle(fd);
- fd->cur_cmd->SCp.phase |= aborted;
+ fdomain_scsi_pointer(fd->cur_cmd)->phase |= aborted;
/* Aborts are not done well. . . */
set_host_byte(fd->cur_cmd, DID_ABORT);
@@ -501,6 +508,7 @@ static struct scsi_host_template fdomain_template = {
.this_id = 7,
.sg_tablesize = 64,
.dma_boundary = PAGE_SIZE - 1,
+ .cmd_size = sizeof(struct scsi_pointer),
};
struct Scsi_Host *fdomain_create(int base, int irq, int this_id,
next prev parent reply other threads:[~2022-02-16 21:03 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-16 21:01 [PATCH v4 00/50] Remove the SCSI pointer from struct scsi_cmnd Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 01/50] scsi: ips: Remove an unreachable statement Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 02/50] scsi: ips: Change the return type of ips_release() into 'void' Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 03/50] scsi: ips: Use true and false instead of TRUE and FALSE Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 04/50] scsi: nsp_cs: Change the return type of two functions into 'void' Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 05/50] scsi: nsp_cs: Use true and false instead of TRUE and FALSE Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 06/50] scsi: Remove drivers/scsi/scsi.h Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 07/50] scsi: NCR5380: Remove the NCR5380_CMD_SIZE macro Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 08/50] scsi: NCR5380: Introduce the NCR5380_cmd_priv() function Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 09/50] scsi: NCR5380: Move the SCSI pointer to private command data Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 10/50] scsi: arm: Rename arm/scsi.h into arm/arm_scsi.h Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 11/50] scsi: arm: Move the SCSI pointer to private command data Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 12/50] scsi: 53c700: Stop clearing SCSI pointer fields Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 13/50] scsi: aacraid: Move the SCSI pointer to private command data Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 14/50] scsi: advansys: " Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 15/50] scsi: aha1542: Remove a set-but-not-used array Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 16/50] scsi: aha152x: Move the SCSI pointer to private command data Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 17/50] scsi: bfa: Stop using the SCSI pointer Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 18/50] scsi: csio: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 19/50] scsi: dc395x: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 20/50] scsi: esp_scsi: " Bart Van Assche
2022-02-16 21:02 ` Bart Van Assche [this message]
2022-02-16 21:02 ` [PATCH v4 22/50] scsi: fnic: Fix a tracing statement Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 23/50] scsi: fnic: Stop using the SCSI pointer Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 24/50] scsi: hptiop: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 25/50] scsi: imm: Move the SCSI pointer to private command data Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 26/50] scsi: iscsi: Stop using the SCSI pointer Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 27/50] scsi: initio: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 28/50] scsi: libfc: " Bart Van Assche
2022-02-17 7:05 ` Hannes Reinecke
2022-02-16 21:02 ` [PATCH v4 29/50] scsi: bnx2fc: " Bart Van Assche
2022-02-17 7:06 ` Hannes Reinecke
2022-02-16 21:02 ` [PATCH v4 30/50] scsi: qedf: " Bart Van Assche
2022-02-17 7:06 ` Hannes Reinecke
2022-02-16 21:02 ` [PATCH v4 31/50] scsi: mac53c94: Fix a set-but-not-used compiler warning Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 32/50] scsi: mac53c94: Move the SCSI pointer to private command data Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 33/50] scsi: megaraid: Stop using the SCSI pointer Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 34/50] scsi: megasas: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 35/50] scsi: mesh: Move the SCSI pointer to private command data Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 36/50] scsi: mvsas: Fix a set-but-not-used warning Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 37/50] scsi: mvumi: Stop using the SCSI pointer Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 38/50] scsi: nsp32: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 39/50] scsi: nsp_cs: Move the SCSI pointer to private command data Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 40/50] scsi: sym53c500_cs: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 41/50] scsi: ppa: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 42/50] scsi: qla1280: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 43/50] scsi: qla2xxx: Stop using the SCSI pointer Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 44/50] scsi: smartpqi: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 45/50] scsi: sym53c8xx_2: Move the SCSI pointer to private command data Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 46/50] scsi: usb: Stop using the SCSI pointer Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 47/50] scsi: wd719x: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 48/50] scsi: wd33c93: Move the SCSI pointer to private command data Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 49/50] scsi: zalon: Stop using the SCSI pointer Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 50/50] scsi: core: Remove struct scsi_pointer from struct scsi_cmnd Bart Van Assche
2022-02-18 0:45 ` [PATCH v4 00/50] Remove the SCSI pointer " Finn Thain
2022-02-18 19:43 ` Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220216210233.28774-22-bvanassche@acm.org \
--to=bvanassche@acm.org \
--cc=hare@suse.de \
--cc=himanshu.madhani@oracle.com \
--cc=jejb@linux.ibm.com \
--cc=johannes.thumshirn@wdc.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox