public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org, Bart Van Assche <bvanassche@acm.org>,
	Johannes Thumshirn <johannes.thumshirn@wdc.com>,
	Himanshu Madhani <himanshu.madhani@oracle.com>,
	"James E.J. Bottomley" <jejb@linux.ibm.com>
Subject: [PATCH v4 25/50] scsi: imm: Move the SCSI pointer to private command data
Date: Wed, 16 Feb 2022 13:02:08 -0800	[thread overview]
Message-ID: <20220216210233.28774-26-bvanassche@acm.org> (raw)
In-Reply-To: <20220216210233.28774-1-bvanassche@acm.org>

Set .cmd_size in the SCSI host template instead of using the SCSI pointer.
This patch prepares for removal of the SCSI pointer from struct scsi_cmnd.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/imm.c | 88 ++++++++++++++++++++++++----------------------
 drivers/scsi/imm.h |  5 +++
 2 files changed, 50 insertions(+), 43 deletions(-)

diff --git a/drivers/scsi/imm.c b/drivers/scsi/imm.c
index 8afdb4dba2be..7a499d621c25 100644
--- a/drivers/scsi/imm.c
+++ b/drivers/scsi/imm.c
@@ -66,7 +66,7 @@ static void got_it(imm_struct *dev)
 {
 	dev->base = dev->dev->port->base;
 	if (dev->cur_cmd)
-		dev->cur_cmd->SCp.phase = 1;
+		imm_scsi_pointer(dev->cur_cmd)->phase = 1;
 	else
 		wake_up(dev->waiting);
 }
@@ -618,13 +618,14 @@ static inline int imm_send_command(struct scsi_cmnd *cmd)
  * The driver appears to remain stable if we speed up the parallel port
  * i/o in this function, but not elsewhere.
  */
-static int imm_completion(struct scsi_cmnd *cmd)
+static int imm_completion(struct scsi_cmnd *const cmd)
 {
 	/* Return codes:
 	 * -1     Error
 	 *  0     Told to schedule
 	 *  1     Finished data transfer
 	 */
+	struct scsi_pointer *scsi_pointer = imm_scsi_pointer(cmd);
 	imm_struct *dev = imm_dev(cmd->device->host);
 	unsigned short ppb = dev->base;
 	unsigned long start_jiffies = jiffies;
@@ -660,44 +661,43 @@ static int imm_completion(struct scsi_cmnd *cmd)
 		 * a) Drive status is screwy (!ready && !present)
 		 * b) Drive is requesting/sending more data than expected
 		 */
-		if (((r & 0x88) != 0x88) || (cmd->SCp.this_residual <= 0)) {
+		if ((r & 0x88) != 0x88 || scsi_pointer->this_residual <= 0) {
 			imm_fail(dev, DID_ERROR);
 			return -1;	/* ERROR_RETURN */
 		}
 		/* determine if we should use burst I/O */
 		if (dev->rd == 0) {
-			fast = (bulk
-				&& (cmd->SCp.this_residual >=
-				    IMM_BURST_SIZE)) ? IMM_BURST_SIZE : 2;
-			status = imm_out(dev, cmd->SCp.ptr, fast);
+			fast = bulk && scsi_pointer->this_residual >=
+				IMM_BURST_SIZE ? IMM_BURST_SIZE : 2;
+			status = imm_out(dev, scsi_pointer->ptr, fast);
 		} else {
-			fast = (bulk
-				&& (cmd->SCp.this_residual >=
-				    IMM_BURST_SIZE)) ? IMM_BURST_SIZE : 1;
-			status = imm_in(dev, cmd->SCp.ptr, fast);
+			fast = bulk && scsi_pointer->this_residual >=
+				IMM_BURST_SIZE ? IMM_BURST_SIZE : 1;
+			status = imm_in(dev, scsi_pointer->ptr, fast);
 		}
 
-		cmd->SCp.ptr += fast;
-		cmd->SCp.this_residual -= fast;
+		scsi_pointer->ptr += fast;
+		scsi_pointer->this_residual -= fast;
 
 		if (!status) {
 			imm_fail(dev, DID_BUS_BUSY);
 			return -1;	/* ERROR_RETURN */
 		}
-		if (cmd->SCp.buffer && !cmd->SCp.this_residual) {
+		if (scsi_pointer->buffer && !scsi_pointer->this_residual) {
 			/* if scatter/gather, advance to the next segment */
-			if (cmd->SCp.buffers_residual--) {
-				cmd->SCp.buffer = sg_next(cmd->SCp.buffer);
-				cmd->SCp.this_residual =
-				    cmd->SCp.buffer->length;
-				cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
+			if (scsi_pointer->buffers_residual--) {
+				scsi_pointer->buffer =
+					sg_next(scsi_pointer->buffer);
+				scsi_pointer->this_residual =
+				    scsi_pointer->buffer->length;
+				scsi_pointer->ptr = sg_virt(scsi_pointer->buffer);
 
 				/*
 				 * Make sure that we transfer even number of bytes
 				 * otherwise it makes imm_byte_out() messy.
 				 */
-				if (cmd->SCp.this_residual & 0x01)
-					cmd->SCp.this_residual++;
+				if (scsi_pointer->this_residual & 0x01)
+					scsi_pointer->this_residual++;
 			}
 		}
 		/* Now check to see if the drive is ready to comunicate */
@@ -762,7 +762,7 @@ static void imm_interrupt(struct work_struct *work)
 	}
 #endif
 
-	if (cmd->SCp.phase > 1)
+	if (imm_scsi_pointer(cmd)->phase > 1)
 		imm_disconnect(dev);
 
 	imm_pb_dismiss(dev);
@@ -774,8 +774,9 @@ static void imm_interrupt(struct work_struct *work)
 	return;
 }
 
-static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
+static int imm_engine(imm_struct *dev, struct scsi_cmnd *const cmd)
 {
+	struct scsi_pointer *scsi_pointer = imm_scsi_pointer(cmd);
 	unsigned short ppb = dev->base;
 	unsigned char l = 0, h = 0;
 	int retv, x;
@@ -786,7 +787,7 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
 	if (dev->failed)
 		return 0;
 
-	switch (cmd->SCp.phase) {
+	switch (scsi_pointer->phase) {
 	case 0:		/* Phase 0 - Waiting for parport */
 		if (time_after(jiffies, dev->jstart + HZ)) {
 			/*
@@ -800,7 +801,7 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
 
 	case 1:		/* Phase 1 - Connected */
 		imm_connect(dev, CONNECT_EPP_MAYBE);
-		cmd->SCp.phase++;
+		scsi_pointer->phase++;
 		fallthrough;
 
 	case 2:		/* Phase 2 - We are now talking to the scsi bus */
@@ -808,7 +809,7 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
 			imm_fail(dev, DID_NO_CONNECT);
 			return 0;
 		}
-		cmd->SCp.phase++;
+		scsi_pointer->phase++;
 		fallthrough;
 
 	case 3:		/* Phase 3 - Ready to accept a command */
@@ -818,23 +819,23 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
 
 		if (!imm_send_command(cmd))
 			return 0;
-		cmd->SCp.phase++;
+		scsi_pointer->phase++;
 		fallthrough;
 
 	case 4:		/* Phase 4 - Setup scatter/gather buffers */
 		if (scsi_bufflen(cmd)) {
-			cmd->SCp.buffer = scsi_sglist(cmd);
-			cmd->SCp.this_residual = cmd->SCp.buffer->length;
-			cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
+			scsi_pointer->buffer = scsi_sglist(cmd);
+			scsi_pointer->this_residual = scsi_pointer->buffer->length;
+			scsi_pointer->ptr = sg_virt(scsi_pointer->buffer);
 		} else {
-			cmd->SCp.buffer = NULL;
-			cmd->SCp.this_residual = 0;
-			cmd->SCp.ptr = NULL;
+			scsi_pointer->buffer = NULL;
+			scsi_pointer->this_residual = 0;
+			scsi_pointer->ptr = NULL;
 		}
-		cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1;
-		cmd->SCp.phase++;
-		if (cmd->SCp.this_residual & 0x01)
-			cmd->SCp.this_residual++;
+		scsi_pointer->buffers_residual = scsi_sg_count(cmd) - 1;
+		scsi_pointer->phase++;
+		if (scsi_pointer->this_residual & 0x01)
+			scsi_pointer->this_residual++;
 		fallthrough;
 
 	case 5:		/* Phase 5 - Pre-Data transfer stage */
@@ -851,7 +852,7 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
 		if ((dev->dp) && (dev->rd))
 			if (imm_negotiate(dev))
 				return 0;
-		cmd->SCp.phase++;
+		scsi_pointer->phase++;
 		fallthrough;
 
 	case 6:		/* Phase 6 - Data transfer stage */
@@ -867,7 +868,7 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
 			if (retv == 0)
 				return 1;
 		}
-		cmd->SCp.phase++;
+		scsi_pointer->phase++;
 		fallthrough;
 
 	case 7:		/* Phase 7 - Post data transfer stage */
@@ -879,7 +880,7 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
 				w_ctr(ppb, 0x4);
 			}
 		}
-		cmd->SCp.phase++;
+		scsi_pointer->phase++;
 		fallthrough;
 
 	case 8:		/* Phase 8 - Read status/message */
@@ -922,7 +923,7 @@ static int imm_queuecommand_lck(struct scsi_cmnd *cmd)
 	dev->jstart = jiffies;
 	dev->cur_cmd = cmd;
 	cmd->result = DID_ERROR << 16;	/* default return code */
-	cmd->SCp.phase = 0;	/* bus free */
+	imm_scsi_pointer(cmd)->phase = 0;	/* bus free */
 
 	schedule_delayed_work(&dev->imm_tq, 0);
 
@@ -961,7 +962,7 @@ static int imm_abort(struct scsi_cmnd *cmd)
 	 * have tied the SCSI_MESSAGE line high in the interface
 	 */
 
-	switch (cmd->SCp.phase) {
+	switch (imm_scsi_pointer(cmd)->phase) {
 	case 0:		/* Do not have access to parport */
 	case 1:		/* Have not connected to interface */
 		dev->cur_cmd = NULL;	/* Forget the problem */
@@ -987,7 +988,7 @@ static int imm_reset(struct scsi_cmnd *cmd)
 {
 	imm_struct *dev = imm_dev(cmd->device->host);
 
-	if (cmd->SCp.phase)
+	if (imm_scsi_pointer(cmd)->phase)
 		imm_disconnect(dev);
 	dev->cur_cmd = NULL;	/* Forget the problem */
 
@@ -1109,6 +1110,7 @@ static struct scsi_host_template imm_template = {
 	.sg_tablesize		= SG_ALL,
 	.can_queue		= 1,
 	.slave_alloc		= imm_adjust_queue,
+	.cmd_size		= sizeof(struct scsi_pointer),
 };
 
 /***************************************************************************
diff --git a/drivers/scsi/imm.h b/drivers/scsi/imm.h
index 7f2bb35b1b87..411cf94af5b0 100644
--- a/drivers/scsi/imm.h
+++ b/drivers/scsi/imm.h
@@ -139,6 +139,11 @@ static char *IMM_MODE_STRING[] =
 #define w_ctr(x,y)      outb(y, (x)+2)
 #endif
 
+static inline struct scsi_pointer *imm_scsi_pointer(struct scsi_cmnd *cmd)
+{
+	return scsi_cmd_priv(cmd);
+}
+
 static int imm_engine(imm_struct *, struct scsi_cmnd *);
 
 #endif				/* _IMM_H */

  parent reply	other threads:[~2022-02-16 21:04 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-16 21:01 [PATCH v4 00/50] Remove the SCSI pointer from struct scsi_cmnd Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 01/50] scsi: ips: Remove an unreachable statement Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 02/50] scsi: ips: Change the return type of ips_release() into 'void' Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 03/50] scsi: ips: Use true and false instead of TRUE and FALSE Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 04/50] scsi: nsp_cs: Change the return type of two functions into 'void' Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 05/50] scsi: nsp_cs: Use true and false instead of TRUE and FALSE Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 06/50] scsi: Remove drivers/scsi/scsi.h Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 07/50] scsi: NCR5380: Remove the NCR5380_CMD_SIZE macro Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 08/50] scsi: NCR5380: Introduce the NCR5380_cmd_priv() function Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 09/50] scsi: NCR5380: Move the SCSI pointer to private command data Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 10/50] scsi: arm: Rename arm/scsi.h into arm/arm_scsi.h Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 11/50] scsi: arm: Move the SCSI pointer to private command data Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 12/50] scsi: 53c700: Stop clearing SCSI pointer fields Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 13/50] scsi: aacraid: Move the SCSI pointer to private command data Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 14/50] scsi: advansys: " Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 15/50] scsi: aha1542: Remove a set-but-not-used array Bart Van Assche
2022-02-16 21:01 ` [PATCH v4 16/50] scsi: aha152x: Move the SCSI pointer to private command data Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 17/50] scsi: bfa: Stop using the SCSI pointer Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 18/50] scsi: csio: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 19/50] scsi: dc395x: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 20/50] scsi: esp_scsi: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 21/50] scsi: fdomain: Move the SCSI pointer to private command data Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 22/50] scsi: fnic: Fix a tracing statement Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 23/50] scsi: fnic: Stop using the SCSI pointer Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 24/50] scsi: hptiop: " Bart Van Assche
2022-02-16 21:02 ` Bart Van Assche [this message]
2022-02-16 21:02 ` [PATCH v4 26/50] scsi: iscsi: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 27/50] scsi: initio: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 28/50] scsi: libfc: " Bart Van Assche
2022-02-17  7:05   ` Hannes Reinecke
2022-02-16 21:02 ` [PATCH v4 29/50] scsi: bnx2fc: " Bart Van Assche
2022-02-17  7:06   ` Hannes Reinecke
2022-02-16 21:02 ` [PATCH v4 30/50] scsi: qedf: " Bart Van Assche
2022-02-17  7:06   ` Hannes Reinecke
2022-02-16 21:02 ` [PATCH v4 31/50] scsi: mac53c94: Fix a set-but-not-used compiler warning Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 32/50] scsi: mac53c94: Move the SCSI pointer to private command data Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 33/50] scsi: megaraid: Stop using the SCSI pointer Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 34/50] scsi: megasas: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 35/50] scsi: mesh: Move the SCSI pointer to private command data Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 36/50] scsi: mvsas: Fix a set-but-not-used warning Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 37/50] scsi: mvumi: Stop using the SCSI pointer Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 38/50] scsi: nsp32: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 39/50] scsi: nsp_cs: Move the SCSI pointer to private command data Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 40/50] scsi: sym53c500_cs: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 41/50] scsi: ppa: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 42/50] scsi: qla1280: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 43/50] scsi: qla2xxx: Stop using the SCSI pointer Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 44/50] scsi: smartpqi: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 45/50] scsi: sym53c8xx_2: Move the SCSI pointer to private command data Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 46/50] scsi: usb: Stop using the SCSI pointer Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 47/50] scsi: wd719x: " Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 48/50] scsi: wd33c93: Move the SCSI pointer to private command data Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 49/50] scsi: zalon: Stop using the SCSI pointer Bart Van Assche
2022-02-16 21:02 ` [PATCH v4 50/50] scsi: core: Remove struct scsi_pointer from struct scsi_cmnd Bart Van Assche
2022-02-18  0:45 ` [PATCH v4 00/50] Remove the SCSI pointer " Finn Thain
2022-02-18 19:43   ` Bart Van Assche

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220216210233.28774-26-bvanassche@acm.org \
    --to=bvanassche@acm.org \
    --cc=himanshu.madhani@oracle.com \
    --cc=jejb@linux.ibm.com \
    --cc=johannes.thumshirn@wdc.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox