[PATCH 03/26] lpfc: Fix diagnostic fw logging after a function reset

[James Smart <jsmart2021@gmail.com>]

lpfc_sli4_ras_setup routine is only called from lpfc_pci_probe_one_s4
routine, which means diagnostic fw logging initialization only occurs
during probing.

Thus, any path involving a reset of the HBA that restarts the
state of the SLI port does not reinitialize diagnostic fw logging.

Move lpfc_sli4_ras_setup into lpfc_sli4_hba_setup so that the
LOWLEVEL_SET_DIAG_LOG_OPTIONS mailbox command can be sent after a
function reset.

Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
---
 drivers/scsi/lpfc/lpfc_init.c | 3 ---
 drivers/scsi/lpfc/lpfc_sli.c  | 3 +++
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index f9cd4b72d949..7dfd47dcaad9 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -14832,9 +14832,6 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
 	/* Check if there are static vports to be created. */
 	lpfc_create_static_vport(phba);
 
-	/* Enable RAS FW log support */
-	lpfc_sli4_ras_setup(phba);
-
 	timer_setup(&phba->cpuhp_poll_timer, lpfc_sli4_poll_hbtimer, 0);
 	cpuhp_state_add_instance_nocalls(lpfc_cpuhp_state, &phba->cpuhp);
 
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index bda2a7ba4e77..7c86271f05fd 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -8864,6 +8864,9 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 	}
 	mempool_free(mboxq, phba->mbox_mem_pool);
 
+	/* Enable RAS FW log support */
+	lpfc_sli4_ras_setup(phba);
+
 	phba->hba_flag |= HBA_SETUP;
 	return rc;
 
-- 
2.26.2