[PATCH v3 0/7] treewide: scsi: ufs: Add support for Renesas R-Car UFS controller

[PATCH v3 0/7] treewide: scsi: ufs: Add support for Renesas R-Car UFS controller

[Yoshihiro Shimoda]

This patch series adds support Renesas R-Car S4-8 UFS controller.
This controller has some restrictions so adds some quirks for it.
Before using this driver, we have to initialize a clock generator
on the environment board (named "Spider") by using the commands of
U-Boot like below:
 => i2c dev 0
 => i2c mw 0x6c 0x26 0x05
 => i2c olen 0x6c 2
 => i2c mw 0x6c 0x26c 0x2e

To use the UFS controller, we need the following patch too:
https://lore.kernel.org/all/20220411124932.3765571-1-yoshihiro.shimoda.uh@renesas.com/

Changes from v2:
 - Add Reviewed-by in patch [1/7]. (Krzysztof, thanks!)
 - Use WARN_ON() instead of BUG_ON in patch [4/7].
https://lore.kernel.org/all/20220414023115.4190736-1-yoshihiro.shimoda.uh@renesas.com/

Changes from v1:
 - Fix dt-binding doc in patch [1/7].
 - Add __maybe_unused for compile test on other platforms in patch [4/7].
 - Fix node names in patch [5/7].
https://lore.kernel.org/all/20220412073647.3808493-1-yoshihiro.shimoda.uh@renesas.com/

Yoshihiro Shimoda (7):
  dt-bindings: ufs: Document Renesas R-Car UFS host controller
  ufs: add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS
  ufs: add UFSHCD_QUIRK_HIBERN_FASTAUTO
  scsi: ufs-renesas: Add support for Renesas R-Car UFS controller
  scsi: MAINTAINERS: Add maintainer for Renesas UFS driver
  arm64: dts: renesas: r8a779f0: Add UFS node
  arm64: dts: renesas: r8a779f0: spider-cpu: Enable UFS device

 .../devicetree/bindings/ufs/renesas,ufs.yaml  |  61 +++
 MAINTAINERS                                   |   7 +
 .../boot/dts/renesas/r8a779f0-spider-cpu.dtsi |   8 +
 arch/arm64/boot/dts/renesas/r8a779f0.dtsi     |  19 +
 drivers/scsi/ufs/Kconfig                      |  12 +
 drivers/scsi/ufs/Makefile                     |   1 +
 drivers/scsi/ufs/ufs-renesas.c                | 418 ++++++++++++++++++
 drivers/scsi/ufs/ufshcd.c                     |  12 +-
 drivers/scsi/ufs/ufshcd.h                     |  12 +
 9 files changed, 547 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/ufs/renesas,ufs.yaml
 create mode 100644 drivers/scsi/ufs/ufs-renesas.c

-- 
2.25.1

[PATCH v3 1/7] dt-bindings: ufs: Document Renesas R-Car UFS host controller

[Yoshihiro Shimoda]

Document Renesas R-Car UFS host controller for R-Car S4-8 (r8a779f0).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/ufs/renesas,ufs.yaml  | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ufs/renesas,ufs.yaml

diff --git a/Documentation/devicetree/bindings/ufs/renesas,ufs.yaml b/Documentation/devicetree/bindings/ufs/renesas,ufs.yaml
new file mode 100644
index 000000000000..f04f9f61fa9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/renesas,ufs.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/renesas,ufs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car UFS Host Controller
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+allOf:
+  - $ref: ufs-common.yaml
+
+properties:
+  compatible:
+    const: renesas,r8a779f0-ufs
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: fck
+      - const: ref_clk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a779f0-sysc.h>
+
+    ufs: ufs@e686000 {
+            compatible = "renesas,r8a779f0-ufs";
+            reg = <0xe6860000 0x100>;
+            interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 1514>, <&ufs30_clk>;
+            clock-names = "fck", "ref_clk";
+            freq-table-hz = <200000000 200000000>, <38400000 38400000>;
+            power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+            resets = <&cpg 1514>;
+    };
-- 
2.25.1

[PATCH v3 2/7] ufs: add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS

[Yoshihiro Shimoda]

Add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS for a broken host controller
of the 64-bit addressing supported capability.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 drivers/scsi/ufs/ufshcd.c | 3 ++-
 drivers/scsi/ufs/ufshcd.h | 6 ++++++
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 3f9caafa91bf..a7bb3945c7c6 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -9513,7 +9513,8 @@ EXPORT_SYMBOL_GPL(ufshcd_dealloc_host);
  */
 static int ufshcd_set_dma_mask(struct ufs_hba *hba)
 {
-	if (hba->capabilities & MASK_64_ADDRESSING_SUPPORT) {
+	if (!(hba->quirks & UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS) &&
+	    hba->capabilities & MASK_64_ADDRESSING_SUPPORT) {
 		if (!dma_set_mask_and_coherent(hba->dev, DMA_BIT_MASK(64)))
 			return 0;
 	}
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 94f545be183a..1745144eb904 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -602,6 +602,12 @@ enum ufshcd_quirks {
 	 * support physical host configuration.
 	 */
 	UFSHCD_QUIRK_SKIP_PH_CONFIGURATION		= 1 << 16,
+
+	/*
+	 * This quirk needs to be enabled if the host controller has
+	 * 64-bit addressing supported capability but it doesn't work.
+	 */
+	UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS		= 1 << 17,
 };
 
 enum ufshcd_caps {
-- 
2.25.1

[PATCH v3 3/7] ufs: add UFSHCD_QUIRK_HIBERN_FASTAUTO

[Yoshihiro Shimoda]

Add UFSHCD_QUIRK_HIBERN_FASTAUTO for a broken host controller of
the auto-hibernate capability but it's FASTAUTO only.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 drivers/scsi/ufs/ufshcd.c | 9 +++++++--
 drivers/scsi/ufs/ufshcd.h | 6 ++++++
 2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index a7bb3945c7c6..adc059a86e1e 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -4247,8 +4247,13 @@ static int ufshcd_get_max_pwr_mode(struct ufs_hba *hba)
 	if (hba->max_pwr_info.is_valid)
 		return 0;
 
-	pwr_info->pwr_tx = FAST_MODE;
-	pwr_info->pwr_rx = FAST_MODE;
+	if (hba->quirks & UFSHCD_QUIRK_HIBERN_FASTAUTO) {
+		pwr_info->pwr_tx = FASTAUTO_MODE;
+		pwr_info->pwr_rx = FASTAUTO_MODE;
+	} else {
+		pwr_info->pwr_tx = FAST_MODE;
+		pwr_info->pwr_rx = FAST_MODE;
+	}
 	pwr_info->hs_rate = PA_HS_MODE_B;
 
 	/* Get the connected lane count */
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 1745144eb904..d14cc48226ce 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -608,6 +608,12 @@ enum ufshcd_quirks {
 	 * 64-bit addressing supported capability but it doesn't work.
 	 */
 	UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS		= 1 << 17,
+
+	/*
+	 * This quirk needs to be enabled if the host controller has
+	 * auto-hibernate capability but it's FASTAUTO only.
+	 */
+	UFSHCD_QUIRK_HIBERN_FASTAUTO			= 1 << 18,
 };
 
 enum ufshcd_caps {
-- 
2.25.1

[PATCH v3 4/7] scsi: ufs-renesas: Add support for Renesas R-Car UFS controller

[Yoshihiro Shimoda]

Add support for Renesas R-Car UFS controller which needs vender specific
initialization.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 drivers/scsi/ufs/Kconfig       |  12 +
 drivers/scsi/ufs/Makefile      |   1 +
 drivers/scsi/ufs/ufs-renesas.c | 418 +++++++++++++++++++++++++++++++++
 3 files changed, 431 insertions(+)
 create mode 100644 drivers/scsi/ufs/ufs-renesas.c

diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 9fe27b01904e..7e7ec1b26537 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -136,6 +136,18 @@ config SCSI_UFS_HISI
 	  Select this if you have UFS controller on Hisilicon chipset.
 	  If unsure, say N.
 
+config SCSI_UFS_RENESAS
+	tristate "Renesas specific hooks to UFS controller platform driver"
+	depends on (ARCH_RENESAS || COMPILE_TEST) && SCSI_UFSHCD_PLATFORM
+	help
+	  This selects the Renesas specific additions to UFSHCD platform driver.
+	  UFS host on Renesas needs some vendor specific configuration before
+	  accessing the hardware.
+
+	  Select this if you have UFS controller on Renesas chipset.
+
+	  If unsure, say N.
+
 config SCSI_UFS_TI_J721E
 	tristate "TI glue layer for Cadence UFS Controller"
 	depends on OF && HAS_IOMEM && (ARCH_K3 || COMPILE_TEST)
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index 966048875b50..b7e4a739ea44 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -23,4 +23,5 @@ obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
 obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
 obj-$(CONFIG_SCSI_UFS_HISI) += ufs-hisi.o
 obj-$(CONFIG_SCSI_UFS_MEDIATEK) += ufs-mediatek.o
+obj-$(CONFIG_SCSI_UFS_RENESAS) += ufs-renesas.o
 obj-$(CONFIG_SCSI_UFS_TI_J721E) += ti-j721e-ufs.o
diff --git a/drivers/scsi/ufs/ufs-renesas.c b/drivers/scsi/ufs/ufs-renesas.c
new file mode 100644
index 000000000000..03756e2aecd4
--- /dev/null
+++ b/drivers/scsi/ufs/ufs-renesas.c
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Renesas UFS host controller driver
+ *
+ * Copyright (C) 2022 Renesas Electronics Corporation
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+
+#include "ufshcd.h"
+#include "ufshcd-pltfrm.h"
+
+struct ufs_renesas_priv {
+	bool initialized;	/* The hardware needs initialization once */
+};
+
+enum {
+	SET_PHY_INDEX_LO = 0,
+	SET_PHY_INDEX_HI,
+	TIMER_INDEX,
+	MAX_INDEX
+};
+
+enum ufs_renesas_init_param_mode {
+	MODE_RESTORE,
+	MODE_SET,
+	MODE_SAVE,
+	MODE_POLL,
+	MODE_WAIT,
+	MODE_WRITE,
+};
+
+#define PARAM_RESTORE(_reg, _index) \
+		{ .mode = MODE_RESTORE, .reg = _reg, .index = _index }
+#define PARAM_SET(_index, _set) \
+		{ .mode = MODE_SET, .index = _index, .u.set = _set }
+#define PARAM_SAVE(_reg, _mask, _index) \
+		{ .mode = MODE_SAVE, .reg = _reg, .mask = (u32)(_mask), \
+		  .index = _index }
+#define PARAM_POLL(_reg, _expected, _mask) \
+		{ .mode = MODE_POLL, .reg = _reg, .u.expected = _expected, \
+		  .mask = (u32)(_mask) }
+#define PARAM_WAIT(_delay_us) \
+		{ .mode = MODE_WAIT, .u.delay_us = _delay_us }
+
+#define PARAM_WRITE(_reg, _val) \
+		{ .mode = MODE_WRITE, .reg = _reg, .u.val = _val }
+
+#define PARAM_WRITE_D0_D4(_d0, _d4) \
+		PARAM_WRITE(0xd0, _d0),	PARAM_WRITE(0xd4, _d4)
+
+#define PARAM_WRITE_800_80C_POLL(_addr, _data_800)		\
+		PARAM_WRITE_D0_D4(0x0000080c, 0x00000100),	\
+		PARAM_WRITE_D0_D4(0x00000800, ((_data_800) << 16) | BIT(8) | (_addr)), \
+		PARAM_WRITE(0xd0, 0x0000080c),			\
+		PARAM_POLL(0xd4, BIT(8), BIT(8))
+
+#define PARAM_RESTORE_800_80C_POLL(_index)			\
+		PARAM_WRITE_D0_D4(0x0000080c, 0x00000100),	\
+		PARAM_WRITE(0xd0, 0x00000800),			\
+		PARAM_RESTORE(0xd4, _index),			\
+		PARAM_WRITE(0xd0, 0x0000080c),			\
+		PARAM_POLL(0xd4, BIT(8), BIT(8))
+
+#define PARAM_WRITE_804_80C_POLL(_addr, _data_804)		\
+		PARAM_WRITE_D0_D4(0x0000080c, 0x00000100),	\
+		PARAM_WRITE_D0_D4(0x00000804, ((_data_804) << 16) | BIT(8) | (_addr)), \
+		PARAM_WRITE(0xd0, 0x0000080c),			\
+		PARAM_POLL(0xd4, BIT(8), BIT(8))
+
+#define PARAM_WRITE_828_82C_POLL(_data_828)			\
+		PARAM_WRITE_D0_D4(0x0000082c, 0x0f000000),	\
+		PARAM_WRITE_D0_D4(0x00000828, _data_828),	\
+		PARAM_WRITE(0xd0, 0x0000082c),			\
+		PARAM_POLL(0xd4, _data_828, _data_828)
+
+#define PARAM_WRITE_PHY(_addr16, _data16)			\
+		PARAM_WRITE(0xf0, 1),				\
+		PARAM_WRITE_800_80C_POLL(0x16, (_addr16) & 0xff), \
+		PARAM_WRITE_800_80C_POLL(0x17, ((_addr16) >> 8) & 0xff), \
+		PARAM_WRITE_800_80C_POLL(0x18, (_data16) & 0xff), \
+		PARAM_WRITE_800_80C_POLL(0x19, ((_data16) >> 8) & 0xff), \
+		PARAM_WRITE_800_80C_POLL(0x1c, 0x01),		\
+		PARAM_WRITE_828_82C_POLL(0x0f000000),		\
+		PARAM_WRITE(0xf0, 0)
+
+#define PARAM_SET_PHY(_addr16, _data16)				\
+		PARAM_WRITE(0xf0, 1),				\
+		PARAM_WRITE_800_80C_POLL(0x16, (_addr16) & 0xff), \
+		PARAM_WRITE_800_80C_POLL(0x17, ((_addr16) >> 8) & 0xff), \
+		PARAM_WRITE_800_80C_POLL(0x1c, 0x01),		\
+		PARAM_WRITE_828_82C_POLL(0x0f000000),		\
+		PARAM_WRITE_804_80C_POLL(0x1a, 0),		\
+		PARAM_WRITE(0xd0, 0x00000808),			\
+		PARAM_SAVE(0xd4, 0xff, SET_PHY_INDEX_LO),	\
+		PARAM_WRITE_804_80C_POLL(0x1b, 0),		\
+		PARAM_WRITE(0xd0, 0x00000808),			\
+		PARAM_SAVE(0xd4, 0xff, SET_PHY_INDEX_HI),	\
+		PARAM_WRITE_828_82C_POLL(0x0f000000),		\
+		PARAM_WRITE(0xf0, 0),				\
+		PARAM_WRITE(0xf0, 1),				\
+		PARAM_WRITE_800_80C_POLL(0x16, (_addr16) & 0xff), \
+		PARAM_WRITE_800_80C_POLL(0x17, ((_addr16) >> 8) & 0xff), \
+		PARAM_SET(SET_PHY_INDEX_LO, ((_data16 & 0xff) << 16) | BIT(8) | 0x18), \
+		PARAM_RESTORE_800_80C_POLL(SET_PHY_INDEX_LO),	\
+		PARAM_SET(SET_PHY_INDEX_HI, (((_data16 >> 8) & 0xff) << 16) | BIT(8) | 0x19), \
+		PARAM_RESTORE_800_80C_POLL(SET_PHY_INDEX_HI),	\
+		PARAM_WRITE_800_80C_POLL(0x1c, 0x01),		\
+		PARAM_WRITE_828_82C_POLL(0x0f000000),		\
+		PARAM_WRITE(0xf0, 0)
+
+#define PARAM_INDIRECT_WRITE(_gpio, _addr, _data_800)		\
+		PARAM_WRITE(0xf0, _gpio),			\
+		PARAM_WRITE_800_80C_POLL(_addr, _data_800),	\
+		PARAM_WRITE_828_82C_POLL(0x0f000000),		\
+		PARAM_WRITE(0xf0, 0)
+
+#define PARAM_INDIRECT_POLL(_gpio, _addr, _expected, _mask)	\
+		PARAM_WRITE(0xf0, _gpio),			\
+		PARAM_WRITE_800_80C_POLL(_addr, 0),		\
+		PARAM_WRITE(0xd0, 0x00000808),			\
+		PARAM_POLL(0xd4, _expected, _mask),		\
+		PARAM_WRITE(0xf0, 0)
+
+struct ufs_renesas_init_param {
+	enum ufs_renesas_init_param_mode mode;
+	u32 reg;
+	union {
+		u32 expected;
+		u32 delay_us;
+		u32 set;
+		u32 val;
+	} u;
+	u32 mask;
+	u32 index;
+};
+
+/* This setting is for SERIES B */
+static const struct ufs_renesas_init_param ufs_param[] = {
+	PARAM_WRITE(0xc0, 0x49425308),
+	PARAM_WRITE_D0_D4(0x00000104, 0x00000002),
+	PARAM_WAIT(1),
+	PARAM_WRITE_D0_D4(0x00000828, 0x00000200),
+	PARAM_WAIT(1),
+	PARAM_WRITE_D0_D4(0x00000828, 0x00000000),
+	PARAM_WRITE_D0_D4(0x00000104, 0x00000001),
+	PARAM_WRITE_D0_D4(0x00000940, 0x00000001),
+	PARAM_WAIT(1),
+	PARAM_WRITE_D0_D4(0x00000940, 0x00000000),
+
+	PARAM_WRITE(0xc0, 0x49425308),
+	PARAM_WRITE(0xc0, 0x41584901),
+
+	PARAM_WRITE_D0_D4(0x0000080c, 0x00000100),
+	PARAM_WRITE_D0_D4(0x00000804, 0x00000000),
+	PARAM_WRITE(0xd0, 0x0000080c),
+	PARAM_POLL(0xd4, BIT(8), BIT(8)),
+
+	PARAM_WRITE(REG_CONTROLLER_ENABLE, 0x00000001),
+
+	PARAM_WRITE(0xd0, 0x00000804),
+	PARAM_POLL(0xd4, BIT(8) | BIT(6) | BIT(0), BIT(8) | BIT(6) | BIT(0)),
+
+	PARAM_WRITE(0xd0, 0x00000d00),
+	PARAM_SAVE(0xd4, 0x0000ffff, TIMER_INDEX),
+	PARAM_WRITE(0xd4, 0x00000000),
+	PARAM_WRITE_D0_D4(0x0000082c, 0x0f000000),
+	PARAM_WRITE_D0_D4(0x00000828, 0x08000000),
+	PARAM_WRITE(0xd0, 0x0000082c),
+	PARAM_POLL(0xd4, BIT(27), BIT(27)),
+	PARAM_WRITE(0xd0, 0x00000d2c),
+	PARAM_POLL(0xd4, BIT(0), BIT(0)),
+
+	/* phy setup */
+	PARAM_INDIRECT_WRITE(1, 0x01, 0x001f),
+	PARAM_INDIRECT_WRITE(7, 0x5d, 0x0014),
+	PARAM_INDIRECT_WRITE(7, 0x5e, 0x0014),
+	PARAM_INDIRECT_WRITE(7, 0x0d, 0x0003),
+	PARAM_INDIRECT_WRITE(7, 0x0e, 0x0007),
+	PARAM_INDIRECT_WRITE(7, 0x5f, 0x0003),
+	PARAM_INDIRECT_WRITE(7, 0x60, 0x0003),
+	PARAM_INDIRECT_WRITE(7, 0x5b, 0x00a6),
+	PARAM_INDIRECT_WRITE(7, 0x5c, 0x0003),
+
+	PARAM_INDIRECT_POLL(7, 0x3c, 0, BIT(7)),
+	PARAM_INDIRECT_POLL(7, 0x4c, 0, BIT(4)),
+
+	PARAM_INDIRECT_WRITE(1, 0x32, 0x0080),
+	PARAM_INDIRECT_WRITE(1, 0x1f, 0x0001),
+	PARAM_INDIRECT_WRITE(0, 0x2c, 0x0001),
+	PARAM_INDIRECT_WRITE(0, 0x32, 0x0087),
+
+	PARAM_INDIRECT_WRITE(1, 0x4d, 0x0061),
+	PARAM_INDIRECT_WRITE(4, 0x9b, 0x0009),
+	PARAM_INDIRECT_WRITE(4, 0xa6, 0x0005),
+	PARAM_INDIRECT_WRITE(4, 0xa5, 0x0058),
+	PARAM_INDIRECT_WRITE(1, 0x39, 0x0027),
+	PARAM_INDIRECT_WRITE(1, 0x47, 0x004c),
+
+	PARAM_INDIRECT_WRITE(7, 0x0d, 0x0002),
+	PARAM_INDIRECT_WRITE(7, 0x0e, 0x0007),
+
+	PARAM_WRITE_PHY(0x0028, 0x0061),
+	PARAM_WRITE_PHY(0x4014, 0x0061),
+	PARAM_SET_PHY(0x401c, BIT(2)),
+	PARAM_WRITE_PHY(0x4000, 0x0000),
+	PARAM_WRITE_PHY(0x4001, 0x0000),
+
+	PARAM_WRITE_PHY(0x10ae, 0x0001),
+	PARAM_WRITE_PHY(0x10ad, 0x0000),
+	PARAM_WRITE_PHY(0x10af, 0x0001),
+	PARAM_WRITE_PHY(0x10b6, 0x0001),
+	PARAM_WRITE_PHY(0x10ae, 0x0000),
+
+	PARAM_WRITE_PHY(0x10ae, 0x0001),
+	PARAM_WRITE_PHY(0x10ad, 0x0000),
+	PARAM_WRITE_PHY(0x10af, 0x0002),
+	PARAM_WRITE_PHY(0x10b6, 0x0001),
+	PARAM_WRITE_PHY(0x10ae, 0x0000),
+
+	PARAM_WRITE_PHY(0x10ae, 0x0001),
+	PARAM_WRITE_PHY(0x10ad, 0x0080),
+	PARAM_WRITE_PHY(0x10af, 0x0000),
+	PARAM_WRITE_PHY(0x10b6, 0x0001),
+	PARAM_WRITE_PHY(0x10ae, 0x0000),
+
+	PARAM_WRITE_PHY(0x10ae, 0x0001),
+	PARAM_WRITE_PHY(0x10ad, 0x0080),
+	PARAM_WRITE_PHY(0x10af, 0x001a),
+	PARAM_WRITE_PHY(0x10b6, 0x0001),
+	PARAM_WRITE_PHY(0x10ae, 0x0000),
+
+	PARAM_INDIRECT_WRITE(7, 0x70, 0x0016),
+	PARAM_INDIRECT_WRITE(7, 0x71, 0x0016),
+	PARAM_INDIRECT_WRITE(7, 0x72, 0x0014),
+	PARAM_INDIRECT_WRITE(7, 0x73, 0x0014),
+	PARAM_INDIRECT_WRITE(7, 0x74, 0x0000),
+	PARAM_INDIRECT_WRITE(7, 0x75, 0x0000),
+	PARAM_INDIRECT_WRITE(7, 0x76, 0x0010),
+	PARAM_INDIRECT_WRITE(7, 0x77, 0x0010),
+	PARAM_INDIRECT_WRITE(7, 0x78, 0x00ff),
+	PARAM_INDIRECT_WRITE(7, 0x79, 0x0000),
+
+	PARAM_INDIRECT_WRITE(7, 0x19, 0x0007),
+
+	PARAM_INDIRECT_WRITE(7, 0x1a, 0x0007),
+
+	PARAM_INDIRECT_WRITE(7, 0x24, 0x000c),
+
+	PARAM_INDIRECT_WRITE(7, 0x25, 0x000c),
+
+	PARAM_INDIRECT_WRITE(7, 0x62, 0x0000),
+	PARAM_INDIRECT_WRITE(7, 0x63, 0x0000),
+	PARAM_INDIRECT_WRITE(7, 0x5d, 0x0014),
+	PARAM_INDIRECT_WRITE(7, 0x5e, 0x0017),
+	PARAM_INDIRECT_WRITE(7, 0x5d, 0x0004),
+	PARAM_INDIRECT_WRITE(7, 0x5e, 0x0017),
+	PARAM_INDIRECT_POLL(7, 0x55, 0, BIT(6)),
+	PARAM_INDIRECT_POLL(7, 0x41, 0, BIT(7)),
+	/* end of phy setup */
+
+	PARAM_WRITE(0xf0, 0),
+	PARAM_WRITE(0xd0, 0x00000d00),
+	PARAM_RESTORE(0xd4, TIMER_INDEX),
+};
+
+static void ufs_renesas_dbg_register_dump(struct ufs_hba *hba)
+{
+	ufshcd_dump_regs(hba, 0xc0, 0x40, "regs: 0xc0 + ");
+}
+
+static void ufs_renesas_reg_control(struct ufs_hba *hba,
+				    const struct ufs_renesas_init_param *p)
+{
+	static u32 save[MAX_INDEX];
+	int ret;
+	u32 val;
+
+	pr_debug("%s: %d %04x %08x, %08x, %d\n", __func__, p->mode, p->reg,
+		 p->u.val, p->mask, p->index);
+
+	WARN_ON(p->index >= MAX_INDEX);
+
+	switch (p->mode) {
+	case MODE_RESTORE:
+		ufshcd_writel(hba, save[p->index], p->reg);
+		break;
+	case MODE_SET:
+		pr_debug("%s: %d %x %x\n", __func__, p->index, save[p->index],
+			 p->u.set);
+		save[p->index] |= p->u.set;
+		break;
+	case MODE_SAVE:
+		save[p->index] = ufshcd_readl(hba, p->reg) & p->mask;
+		pr_debug("%s: index = %d, val = %08x\n", __func__,
+			 p->index, val);
+		break;
+	case MODE_POLL:
+		ret = readl_poll_timeout_atomic(hba->mmio_base + p->reg,
+						val,
+						(val & p->mask) == p->u.expected,
+						10, 1000);
+		if (ret)
+			pr_err("%s: poll failed %d (%08x, %08x, %08x)\n",
+			       __func__, ret, val, p->mask, p->u.expected);
+		break;
+	case MODE_WAIT:
+		if (p->u.delay_us > 1000)
+			mdelay(p->u.delay_us / 1000);
+		else
+			udelay(p->u.delay_us);
+		break;
+	case MODE_WRITE:
+		ufshcd_writel(hba, p->u.val, p->reg);
+		break;
+	default:
+		break;
+	}
+}
+
+static void ufs_renesas_pre_init(struct ufs_hba *hba)
+{
+	const struct ufs_renesas_init_param *p = ufs_param;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ufs_param); i++)
+		ufs_renesas_reg_control(hba, &p[i]);
+}
+
+static int ufs_renesas_hce_enable_notify(struct ufs_hba *hba,
+					 enum ufs_notify_change_status status)
+{
+	struct ufs_renesas_priv *priv = ufshcd_get_variant(hba);
+
+	if (priv->initialized)
+		return 0;
+
+	if (status == PRE_CHANGE)
+		ufs_renesas_pre_init(hba);
+
+	priv->initialized = true;
+
+	return 0;
+}
+
+static int ufs_renesas_setup_clocks(struct ufs_hba *hba, bool on,
+				    enum ufs_notify_change_status status)
+{
+	if (on && status == PRE_CHANGE)
+		pm_runtime_get_sync(hba->dev);
+	else if (!on && status == POST_CHANGE)
+		pm_runtime_put(hba->dev);
+
+	return 0;
+}
+
+static int ufs_renesas_init(struct ufs_hba *hba)
+{
+	struct ufs_renesas_priv *priv;
+
+	priv = devm_kmalloc(hba->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	ufshcd_set_variant(hba, priv);
+
+	hba->quirks |= UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS | UFSHCD_QUIRK_HIBERN_FASTAUTO;
+
+	return 0;
+}
+
+static const struct ufs_hba_variant_ops ufs_renesas_vops = {
+	.name		= "renesas",
+	.init		= ufs_renesas_init,
+	.setup_clocks	= ufs_renesas_setup_clocks,
+	.hce_enable_notify = ufs_renesas_hce_enable_notify,
+	.dbg_register_dump = ufs_renesas_dbg_register_dump,
+};
+
+static const struct of_device_id __maybe_unused ufs_renesas_of_match[] = {
+	{ .compatible = "renesas,r8a779f0-ufs" },
+};
+MODULE_DEVICE_TABLE(of, ufs_renesas_of_match);
+
+static int ufs_renesas_probe(struct platform_device *pdev)
+{
+	return ufshcd_pltfrm_init(pdev, &ufs_renesas_vops);
+}
+
+static int ufs_renesas_remove(struct platform_device *pdev)
+{
+	struct ufs_hba *hba = platform_get_drvdata(pdev);
+
+	ufshcd_remove(hba);
+
+	return 0;
+}
+
+static struct platform_driver ufs_renesas_platform = {
+	.probe	= ufs_renesas_probe,
+	.remove	= ufs_renesas_remove,
+	.driver	= {
+		.name	= "ufshcd-renesas",
+		.of_match_table	= of_match_ptr(ufs_renesas_of_match),
+	},
+};
+module_platform_driver(ufs_renesas_platform);
+
+MODULE_AUTHOR("Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>");
+MODULE_DESCRIPTION("Renesas UFS host controller driver");
+MODULE_LICENSE("Dual MIT/GPL");
-- 
2.25.1

[PATCH v3 5/7] scsi: MAINTAINERS: Add maintainer for Renesas UFS driver

[Yoshihiro Shimoda]

Add maintainer for Renesas UFS driver.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 MAINTAINERS | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index f8db959c10a5..3a10f293ded9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20219,6 +20219,13 @@ L:	linux-mediatek@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/scsi/ufs/ufs-mediatek*
 
+UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER RENESAS HOOKS
+M:	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+L:	linux-renesas-soc@vger.kernel.org
+L:	linux-scsi@vger.kernel.org
+S:	Maintained
+F:	drivers/scsi/ufs/*renesas*
+
 UNSORTED BLOCK IMAGES (UBI)
 M:	Richard Weinberger <richard@nod.at>
 L:	linux-mtd@lists.infradead.org
-- 
2.25.1

[PATCH v3 6/7] arm64: dts: renesas: r8a779f0: Add UFS node

[Yoshihiro Shimoda]

Add UFS node for R-Car S4-8 (r8a779f0).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 arch/arm64/boot/dts/renesas/r8a779f0.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
index b0241aa29fc8..9639b50fb62b 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
@@ -40,6 +40,13 @@ extalr_clk: extalr {
 		clock-frequency = <0>;
 	};
 
+	ufs30_clk: ufs30-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
 	pmu_a55 {
 		compatible = "arm,cortex-a55-pmu";
 		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
@@ -258,6 +265,18 @@ i2c5: i2c@e66e0000 {
 			status = "disabled";
 		};
 
+		ufs: ufs@e6860000 {
+			compatible = "renesas,r8a779f0-ufs";
+			reg = <0 0xe6860000 0 0x100>;
+			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1514>, <&ufs30_clk>;
+			clock-names = "fck", "ref_clk";
+			freq-table-hz = <200000000 200000000>, <38400000 38400000>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 1514>;
+			status = "disabled";
+		};
+
 		scif3: serial@e6c50000 {
 			compatible = "renesas,scif-r8a779f0",
 				     "renesas,rcar-gen4-scif", "renesas,scif";
-- 
2.25.1

[PATCH v3 7/7] arm64: dts: renesas: r8a779f0: spider-cpu: Enable UFS device

[Yoshihiro Shimoda]

Enable UFS device for R-Car S4-8 Spider CPU board.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
index 41aa8591b3b1..999c823719bc 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
@@ -82,3 +82,11 @@ &scif3 {
 &scif_clk {
 	clock-frequency = <24000000>;
 };
+
+&ufs {
+	status = "okay";
+};
+
+&ufs30_clk {
+	clock-frequency = <38400000>;
+};
-- 
2.25.1

Re: [PATCH v3 4/7] scsi: ufs-renesas: Add support for Renesas R-Car UFS controller

[kernel test robot]

Hi Yoshihiro,

I love your patch! Perhaps something to improve:

[auto build test WARNING on geert-renesas-devel/next]
[also build test WARNING on v5.18-rc3 next-20220419]
[cannot apply to mkp-scsi/for-next jejb-scsi/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/intel-lab-lkp/linux/commits/Yoshihiro-Shimoda/treewide-scsi-ufs-Add-support-for-Renesas-R-Car-UFS-controller/20220419-201020
base:   https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git next
config: hexagon-allyesconfig (https://download.01.org/0day-ci/archive/20220420/202204200731.hTb71eG4-lkp@intel.com/config)
compiler: clang version 15.0.0 (https://github.com/llvm/llvm-project c1c49a356162b22554088d269f7689bdb044a9f1)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/3dca0de1a5ecda3be36402f3261cf286ce9dce64
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Yoshihiro-Shimoda/treewide-scsi-ufs-Add-support-for-Renesas-R-Car-UFS-controller/20220419-201020
        git checkout 3dca0de1a5ecda3be36402f3261cf286ce9dce64
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=hexagon SHELL=/bin/bash drivers/scsi/ufs/

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

>> drivers/scsi/ufs/ufs-renesas.c:304:15: warning: variable 'val' is uninitialized when used here [-Wuninitialized]
                            p->index, val);
                                      ^~~
   include/linux/printk.h:570:26: note: expanded from macro 'pr_debug'
           dynamic_pr_debug(fmt, ##__VA_ARGS__)
                                   ^~~~~~~~~~~
   include/linux/dynamic_debug.h:163:22: note: expanded from macro 'dynamic_pr_debug'
                              pr_fmt(fmt), ##__VA_ARGS__)
                                             ^~~~~~~~~~~
   include/linux/dynamic_debug.h:152:56: note: expanded from macro '_dynamic_func_call'
           __dynamic_func_call(__UNIQUE_ID(ddebug), fmt, func, ##__VA_ARGS__)
                                                                 ^~~~~~~~~~~
   include/linux/dynamic_debug.h:134:15: note: expanded from macro '__dynamic_func_call'
                   func(&id, ##__VA_ARGS__);               \
                               ^~~~~~~~~~~
   drivers/scsi/ufs/ufs-renesas.c:285:9: note: initialize the variable 'val' to silence this warning
           u32 val;
                  ^
                   = 0
   1 warning generated.


vim +/val +304 drivers/scsi/ufs/ufs-renesas.c

   279	
   280	static void ufs_renesas_reg_control(struct ufs_hba *hba,
   281					    const struct ufs_renesas_init_param *p)
   282	{
   283		static u32 save[MAX_INDEX];
   284		int ret;
   285		u32 val;
   286	
   287		pr_debug("%s: %d %04x %08x, %08x, %d\n", __func__, p->mode, p->reg,
   288			 p->u.val, p->mask, p->index);
   289	
   290		WARN_ON(p->index >= MAX_INDEX);
   291	
   292		switch (p->mode) {
   293		case MODE_RESTORE:
   294			ufshcd_writel(hba, save[p->index], p->reg);
   295			break;
   296		case MODE_SET:
   297			pr_debug("%s: %d %x %x\n", __func__, p->index, save[p->index],
   298				 p->u.set);
   299			save[p->index] |= p->u.set;
   300			break;
   301		case MODE_SAVE:
   302			save[p->index] = ufshcd_readl(hba, p->reg) & p->mask;
   303			pr_debug("%s: index = %d, val = %08x\n", __func__,
 > 304				 p->index, val);
   305			break;
   306		case MODE_POLL:
   307			ret = readl_poll_timeout_atomic(hba->mmio_base + p->reg,
   308							val,
   309							(val & p->mask) == p->u.expected,
   310							10, 1000);
   311			if (ret)
   312				pr_err("%s: poll failed %d (%08x, %08x, %08x)\n",
   313				       __func__, ret, val, p->mask, p->u.expected);
   314			break;
   315		case MODE_WAIT:
   316			if (p->u.delay_us > 1000)
   317				mdelay(p->u.delay_us / 1000);
   318			else
   319				udelay(p->u.delay_us);
   320			break;
   321		case MODE_WRITE:
   322			ufshcd_writel(hba, p->u.val, p->reg);
   323			break;
   324		default:
   325			break;
   326		}
   327	}
   328	

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

RE: [PATCH v3 4/7] scsi: ufs-renesas: Add support for Renesas R-Car UFS controller

[Yoshihiro Shimoda]

Hi,

> From: kernel test robot, Sent: Wednesday, April 20, 2022 8:40 AM
> 
> Hi Yoshihiro,
> 
<snip>
> All warnings (new ones prefixed by >>):
> 
> >> drivers/scsi/ufs/ufs-renesas.c:304:15: warning: variable 'val' is uninitialized when used here [-Wuninitialized]
>                             p->index, val);
>                                       ^~~

I'll fix this. Printing "save[p->index]" is helpful here instead of "val".

Best regards,
Yoshihiro Shimoda