public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: Juergen Gross <jgross@suse.com>
To: xen-devel@lists.xenproject.org, linux-scsi@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Juergen Gross <jgross@suse.com>,
	Boris Ostrovsky <boris.ostrovsky@oracle.com>,
	Stefano Stabellini <sstabellini@kernel.org>
Subject: [PATCH v2 2/4] xen/scsiback: use new command result macros
Date: Thu, 28 Apr 2022 09:53:21 +0200	[thread overview]
Message-ID: <20220428075323.12853-3-jgross@suse.com> (raw)
In-Reply-To: <20220428075323.12853-1-jgross@suse.com>

Instead of using the kernel's values for the result of PV scsi
operations use the values of the interface definition.

Signed-off-by: Juergen Gross <jgross@suse.com>
---
V2:
- fix scsiback_result() to pass through lowest 16 bits of result
- use XEN_VSCSIIF_RSLT_HOST() instead of open coding it (Boris Ostrovsky)
---
 drivers/xen/xen-scsiback.c | 82 ++++++++++++++++++++++++++++++++++++--
 1 file changed, 79 insertions(+), 3 deletions(-)

diff --git a/drivers/xen/xen-scsiback.c b/drivers/xen/xen-scsiback.c
index 0c5e565aa8cf..7a0c93acc2c5 100644
--- a/drivers/xen/xen-scsiback.c
+++ b/drivers/xen/xen-scsiback.c
@@ -280,6 +280,82 @@ static void scsiback_free_translation_entry(struct kref *kref)
 	kfree(entry);
 }
 
+static int32_t scsiback_result(int32_t result)
+{
+	int32_t host_status;
+
+	switch (XEN_VSCSIIF_RSLT_HOST(result)) {
+	case DID_OK:
+		host_status = XEN_VSCSIIF_RSLT_HOST_OK;
+		break;
+	case DID_NO_CONNECT:
+		host_status = XEN_VSCSIIF_RSLT_HOST_NO_CONNECT;
+		break;
+	case DID_BUS_BUSY:
+		host_status = XEN_VSCSIIF_RSLT_HOST_BUS_BUSY;
+		break;
+	case DID_TIME_OUT:
+		host_status = XEN_VSCSIIF_RSLT_HOST_TIME_OUT;
+		break;
+	case DID_BAD_TARGET:
+		host_status = XEN_VSCSIIF_RSLT_HOST_BAD_TARGET;
+		break;
+	case DID_ABORT:
+		host_status = XEN_VSCSIIF_RSLT_HOST_ABORT;
+		break;
+	case DID_PARITY:
+		host_status = XEN_VSCSIIF_RSLT_HOST_PARITY;
+		break;
+	case DID_ERROR:
+		host_status = XEN_VSCSIIF_RSLT_HOST_ERROR;
+		break;
+	case DID_RESET:
+		host_status = XEN_VSCSIIF_RSLT_HOST_RESET;
+		break;
+	case DID_BAD_INTR:
+		host_status = XEN_VSCSIIF_RSLT_HOST_BAD_INTR;
+		break;
+	case DID_PASSTHROUGH:
+		host_status = XEN_VSCSIIF_RSLT_HOST_PASSTHROUGH;
+		break;
+	case DID_SOFT_ERROR:
+		host_status = XEN_VSCSIIF_RSLT_HOST_SOFT_ERROR;
+		break;
+	case DID_IMM_RETRY:
+		host_status = XEN_VSCSIIF_RSLT_HOST_IMM_RETRY;
+		break;
+	case DID_REQUEUE:
+		host_status = XEN_VSCSIIF_RSLT_HOST_REQUEUE;
+		break;
+	case DID_TRANSPORT_DISRUPTED:
+		host_status = XEN_VSCSIIF_RSLT_HOST_TRANSPORT_DISRUPTED;
+		break;
+	case DID_TRANSPORT_FAILFAST:
+		host_status = XEN_VSCSIIF_RSLT_HOST_TRANSPORT_FAILFAST;
+		break;
+	case DID_TARGET_FAILURE:
+		host_status = XEN_VSCSIIF_RSLT_HOST_TARGET_FAILURE;
+		break;
+	case DID_NEXUS_FAILURE:
+		host_status = XEN_VSCSIIF_RSLT_HOST_NEXUS_FAILURE;
+		break;
+	case DID_ALLOC_FAILURE:
+		host_status = XEN_VSCSIIF_RSLT_HOST_ALLOC_FAILURE;
+		break;
+	case DID_MEDIUM_ERROR:
+		host_status = XEN_VSCSIIF_RSLT_HOST_MEDIUM_ERROR;
+		break;
+	case DID_TRANSPORT_MARGINAL:
+		host_status = XEN_VSCSIIF_RSLT_HOST_TRANSPORT_MARGINAL;
+		break;
+	default:
+		host_status = XEN_VSCSIIF_RSLT_HOST_ERROR;
+		break;
+	}
+
+	return (host_status << 16) | (result & 0x00ffff);
+}
+
 static void scsiback_send_response(struct vscsibk_info *info,
 			char *sense_buffer, int32_t result, uint32_t resid,
 			uint16_t rqid)
@@ -295,7 +371,7 @@ static void scsiback_send_response(struct vscsibk_info *info,
 	ring_res = RING_GET_RESPONSE(&info->ring, info->ring.rsp_prod_pvt);
 	info->ring.rsp_prod_pvt++;
 
-	ring_res->rslt   = result;
+	ring_res->rslt   = scsiback_result(result);
 	ring_res->rqid   = rqid;
 
 	if (sense_buffer != NULL &&
@@ -555,7 +631,7 @@ static void scsiback_device_action(struct vscsibk_pend *pending_req,
 	struct scsiback_nexus *nexus = tpg->tpg_nexus;
 	struct se_cmd *se_cmd = &pending_req->se_cmd;
 	u64 unpacked_lun = pending_req->v2p->lun;
-	int rc, err = FAILED;
+	int rc, err = XEN_VSCSIIF_RSLT_RESET_FAILED;
 
 	init_completion(&pending_req->tmr_done);
 
@@ -569,7 +645,7 @@ static void scsiback_device_action(struct vscsibk_pend *pending_req,
 	wait_for_completion(&pending_req->tmr_done);
 
 	err = (se_cmd->se_tmr_req->response == TMR_FUNCTION_COMPLETE) ?
-		SUCCESS : FAILED;
+		XEN_VSCSIIF_RSLT_RESET_SUCCESS : XEN_VSCSIIF_RSLT_RESET_FAILED;
 
 	scsiback_do_resp_with_sense(NULL, err, 0, pending_req);
 	transport_generic_free_cmd(&pending_req->se_cmd, 0);
-- 
2.34.1


  parent reply	other threads:[~2022-04-28  7:53 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-28  7:53 [PATCH v2 0/4] xen/pv-scsi: update header and harden frontend Juergen Gross
2022-04-28  7:53 ` [PATCH v2 1/4] xen: update vscsiif.h Juergen Gross
2022-04-28  7:53 ` Juergen Gross [this message]
2022-04-28  7:53 ` [PATCH v2 3/4] xen/scsifront: use new command result macros Juergen Gross
2022-04-28  7:53 ` [PATCH v2 4/4] xen/scsifront: harden driver against malicious backend Juergen Gross
2022-04-29 22:25 ` [PATCH v2 0/4] xen/pv-scsi: update header and harden frontend Boris Ostrovsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220428075323.12853-3-jgross@suse.com \
    --to=jgross@suse.com \
    --cc=boris.ostrovsky@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=sstabellini@kernel.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox