From: Hannes Reinecke <hare@suse.de>
To: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>,
James Bottomley <james.bottomley@hansenpartnership.com>,
linux-scsi@vger.kernel.org, Hannes Reinecke <hare@suse.de>,
Hannes Reinecke <hare@suse.com>,
Saurav Kashyap <skashyap@marvell.com>
Subject: [PATCH 08/24] bnx2fc: Do not rely on a scsi command for lun or target reset
Date: Mon, 2 May 2022 23:38:04 +0200 [thread overview]
Message-ID: <20220502213820.3187-9-hare@suse.de> (raw)
In-Reply-To: <20220502213820.3187-1-hare@suse.de>
When a LUN or target reset is issued we should not rely on a scsi
command to be present; we'll have to reset the entire device or
target anyway.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Cc: Saurav Kashyap <skashyap@marvell.com>
---
drivers/scsi/bnx2fc/bnx2fc.h | 1 +
drivers/scsi/bnx2fc/bnx2fc_hwi.c | 14 +++--
drivers/scsi/bnx2fc/bnx2fc_io.c | 94 ++++++++++++++++----------------
3 files changed, 57 insertions(+), 52 deletions(-)
diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h
index 046247420cfa..7e74f77da14f 100644
--- a/drivers/scsi/bnx2fc/bnx2fc.h
+++ b/drivers/scsi/bnx2fc/bnx2fc.h
@@ -384,6 +384,7 @@ struct bnx2fc_rport {
};
struct bnx2fc_mp_req {
+ u64 tm_lun;
u8 tm_flags;
u32 req_len;
diff --git a/drivers/scsi/bnx2fc/bnx2fc_hwi.c b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
index 776544385598..090d436bcef8 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_hwi.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
@@ -1709,7 +1709,8 @@ void bnx2fc_init_task(struct bnx2fc_cmd *io_req,
struct fcoe_cached_sge_ctx *cached_sge;
struct fcoe_ext_mul_sges_ctx *sgl;
int dev_type = tgt->dev_type;
- u64 *fcp_cmnd;
+ struct fcp_cmnd *fcp_cmnd;
+ u64 *raw_fcp_cmnd;
u64 tmp_fcp_cmnd[4];
u32 context_id;
int cnt, i;
@@ -1778,16 +1779,19 @@ void bnx2fc_init_task(struct bnx2fc_cmd *io_req,
task->txwr_rxrd.union_ctx.tx_seq.ctx.seq_cnt = 1;
/* Fill FCP_CMND IU */
- fcp_cmnd = (u64 *)
+ fcp_cmnd = (struct fcp_cmnd *)&tmp_fcp_cmnd;
+ bnx2fc_build_fcp_cmnd(io_req, fcp_cmnd);
+ int_to_scsilun(sc_cmd->device->lun, &fcp_cmnd->fc_lun);
+ memcpy(fcp_cmnd->fc_cdb, sc_cmd->cmnd, sc_cmd->cmd_len);
+ raw_fcp_cmnd = (u64 *)
task->txwr_rxrd.union_ctx.fcp_cmd.opaque;
- bnx2fc_build_fcp_cmnd(io_req, (struct fcp_cmnd *)&tmp_fcp_cmnd);
/* swap fcp_cmnd */
cnt = sizeof(struct fcp_cmnd) / sizeof(u64);
for (i = 0; i < cnt; i++) {
- *fcp_cmnd = cpu_to_be64(tmp_fcp_cmnd[i]);
- fcp_cmnd++;
+ *raw_fcp_cmnd = cpu_to_be64(tmp_fcp_cmnd[i]);
+ raw_fcp_cmnd++;
}
/* Rx Write Tx Read */
diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c
index 962454f2e2b1..055d9424bc0d 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -658,10 +658,9 @@ int bnx2fc_init_mp_req(struct bnx2fc_cmd *io_req)
return SUCCESS;
}
-static int bnx2fc_initiate_tmf(struct scsi_cmnd *sc_cmd, u8 tm_flags)
+static int bnx2fc_initiate_tmf(struct fc_lport *lport, struct fc_rport *rport,
+ u64 tm_lun, u8 tm_flags)
{
- struct fc_lport *lport;
- struct fc_rport *rport;
struct fc_rport_libfc_priv *rp;
struct fcoe_port *port;
struct bnx2fc_interface *interface;
@@ -670,7 +669,6 @@ static int bnx2fc_initiate_tmf(struct scsi_cmnd *sc_cmd, u8 tm_flags)
struct bnx2fc_mp_req *tm_req;
struct fcoe_task_ctx_entry *task;
struct fcoe_task_ctx_entry *task_page;
- struct Scsi_Host *host = sc_cmd->device->host;
struct fc_frame_header *fc_hdr;
struct fcp_cmnd *fcp_cmnd;
int task_idx, index;
@@ -679,8 +677,6 @@ static int bnx2fc_initiate_tmf(struct scsi_cmnd *sc_cmd, u8 tm_flags)
u32 sid, did;
unsigned long start = jiffies;
- lport = shost_priv(host);
- rport = starget_to_rport(scsi_target(sc_cmd->device));
port = lport_priv(lport);
interface = port->priv;
@@ -691,7 +687,7 @@ static int bnx2fc_initiate_tmf(struct scsi_cmnd *sc_cmd, u8 tm_flags)
}
rp = rport->dd_data;
- rc = fc_block_scsi_eh(sc_cmd);
+ rc = fc_block_rport(rport);
if (rc)
return rc;
@@ -720,7 +716,7 @@ static int bnx2fc_initiate_tmf(struct scsi_cmnd *sc_cmd, u8 tm_flags)
goto retry_tmf;
}
/* Initialize rest of io_req fields */
- io_req->sc_cmd = sc_cmd;
+ io_req->sc_cmd = NULL;
io_req->port = port;
io_req->tgt = tgt;
@@ -738,11 +734,13 @@ static int bnx2fc_initiate_tmf(struct scsi_cmnd *sc_cmd, u8 tm_flags)
/* Set TM flags */
io_req->io_req_flags = 0;
tm_req->tm_flags = tm_flags;
+ tm_req->tm_lun = tm_lun;
/* Fill FCP_CMND */
bnx2fc_build_fcp_cmnd(io_req, (struct fcp_cmnd *)tm_req->req_buf);
fcp_cmnd = (struct fcp_cmnd *)tm_req->req_buf;
- memset(fcp_cmnd->fc_cdb, 0, sc_cmd->cmd_len);
+ int_to_scsilun(tm_lun, &fcp_cmnd->fc_lun);
+ memset(fcp_cmnd->fc_cdb, 0, BNX2FC_MAX_CMD_LEN);
fcp_cmnd->fc_dl = 0;
/* Fill FC header */
@@ -765,8 +763,6 @@ static int bnx2fc_initiate_tmf(struct scsi_cmnd *sc_cmd, u8 tm_flags)
task = &(task_page[index]);
bnx2fc_init_mp_task(io_req, task);
- bnx2fc_priv(sc_cmd)->io_req = io_req;
-
/* Obtain free SQ entry */
spin_lock_bh(&tgt->tgt_lock);
bnx2fc_add_2_sq(tgt, xid);
@@ -1064,7 +1060,10 @@ int bnx2fc_initiate_cleanup(struct bnx2fc_cmd *io_req)
*/
int bnx2fc_eh_target_reset(struct scsi_cmnd *sc_cmd)
{
- return bnx2fc_initiate_tmf(sc_cmd, FCP_TMF_TGT_RESET);
+ struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
+ struct fc_lport *lport = shost_priv(rport_to_shost(rport));
+
+ return bnx2fc_initiate_tmf(lport, rport, 0, FCP_TMF_TGT_RESET);
}
/**
@@ -1077,7 +1076,11 @@ int bnx2fc_eh_target_reset(struct scsi_cmnd *sc_cmd)
*/
int bnx2fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
{
- return bnx2fc_initiate_tmf(sc_cmd, FCP_TMF_LUN_RESET);
+ struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
+ struct fc_lport *lport = shost_priv(rport_to_shost(rport));
+
+ return bnx2fc_initiate_tmf(lport, rport, sc_cmd->device->lun,
+ FCP_TMF_LUN_RESET);
}
static int bnx2fc_abts_cleanup(struct bnx2fc_cmd *io_req)
@@ -1452,10 +1455,9 @@ void bnx2fc_process_abts_compl(struct bnx2fc_cmd *io_req,
static void bnx2fc_lun_reset_cmpl(struct bnx2fc_cmd *io_req)
{
- struct scsi_cmnd *sc_cmd = io_req->sc_cmd;
struct bnx2fc_rport *tgt = io_req->tgt;
struct bnx2fc_cmd *cmd, *tmp;
- u64 tm_lun = sc_cmd->device->lun;
+ struct bnx2fc_mp_req *tm_req = &io_req->mp_req;
u64 lun;
int rc = 0;
@@ -1467,8 +1469,10 @@ static void bnx2fc_lun_reset_cmpl(struct bnx2fc_cmd *io_req)
*/
list_for_each_entry_safe(cmd, tmp, &tgt->active_cmd_queue, link) {
BNX2FC_TGT_DBG(tgt, "LUN RST cmpl: scan for pending IOs\n");
+ if (!cmd->sc_cmd)
+ continue;
lun = cmd->sc_cmd->device->lun;
- if (lun == tm_lun) {
+ if (lun == tm_req->tm_lun) {
/* Initiate ABTS on this cmd */
if (!test_and_set_bit(BNX2FC_FLAG_ISSUE_ABTS,
&cmd->req_flags)) {
@@ -1572,31 +1576,36 @@ void bnx2fc_process_tm_compl(struct bnx2fc_cmd *io_req,
printk(KERN_ERR PFX "tmf's fc_hdr r_ctl = 0x%x\n",
fc_hdr->fh_r_ctl);
}
- if (!bnx2fc_priv(sc_cmd)->io_req) {
- printk(KERN_ERR PFX "tm_compl: io_req is NULL\n");
- return;
- }
- switch (io_req->fcp_status) {
- case FC_GOOD:
- if (io_req->cdb_status == 0) {
- /* Good IO completion */
- sc_cmd->result = DID_OK << 16;
- } else {
- /* Transport status is good, SCSI status not good */
- sc_cmd->result = (DID_OK << 16) | io_req->cdb_status;
+ if (sc_cmd) {
+ if (!bnx2fc_priv(sc_cmd)->io_req) {
+ printk(KERN_ERR PFX "tm_compl: io_req is NULL\n");
+ return;
+ }
+ switch (io_req->fcp_status) {
+ case FC_GOOD:
+ if (io_req->cdb_status == 0) {
+ /* Good IO completion */
+ sc_cmd->result = DID_OK << 16;
+ } else {
+ /* Transport status is good, SCSI status not good */
+ sc_cmd->result = (DID_OK << 16) | io_req->cdb_status;
+ }
+ if (io_req->fcp_resid)
+ scsi_set_resid(sc_cmd, io_req->fcp_resid);
+ break;
+
+ default:
+ BNX2FC_IO_DBG(io_req, "process_tm_compl: fcp_status = %d\n",
+ io_req->fcp_status);
+ break;
}
- if (io_req->fcp_resid)
- scsi_set_resid(sc_cmd, io_req->fcp_resid);
- break;
- default:
- BNX2FC_IO_DBG(io_req, "process_tm_compl: fcp_status = %d\n",
- io_req->fcp_status);
- break;
- }
+ sc_cmd = io_req->sc_cmd;
+ io_req->sc_cmd = NULL;
- sc_cmd = io_req->sc_cmd;
- io_req->sc_cmd = NULL;
+ bnx2fc_priv(sc_cmd)->io_req = NULL;
+ scsi_done(sc_cmd);
+ }
/* check if the io_req exists in tgt's tmf_q */
if (io_req->on_tmf_queue) {
@@ -1609,9 +1618,6 @@ void bnx2fc_process_tm_compl(struct bnx2fc_cmd *io_req,
return;
}
- bnx2fc_priv(sc_cmd)->io_req = NULL;
- scsi_done(sc_cmd);
-
kref_put(&io_req->refcount, bnx2fc_cmd_release);
if (io_req->wait_for_abts_comp) {
BNX2FC_IO_DBG(io_req, "tm_compl - wake up the waiter\n");
@@ -1740,15 +1746,9 @@ static void bnx2fc_unmap_sg_list(struct bnx2fc_cmd *io_req)
void bnx2fc_build_fcp_cmnd(struct bnx2fc_cmd *io_req,
struct fcp_cmnd *fcp_cmnd)
{
- struct scsi_cmnd *sc_cmd = io_req->sc_cmd;
-
memset(fcp_cmnd, 0, sizeof(struct fcp_cmnd));
- int_to_scsilun(sc_cmd->device->lun, &fcp_cmnd->fc_lun);
-
fcp_cmnd->fc_dl = htonl(io_req->data_xfer_len);
- memcpy(fcp_cmnd->fc_cdb, sc_cmd->cmnd, sc_cmd->cmd_len);
-
fcp_cmnd->fc_cmdref = 0;
fcp_cmnd->fc_pri_ta = 0;
fcp_cmnd->fc_tm_flags = io_req->mp_req.tm_flags;
--
2.29.2
next prev parent reply other threads:[~2022-05-02 21:38 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-02 21:37 [PATCH 00/24] scsi: EH rework prep patches, part 1 Hannes Reinecke
2022-05-02 21:37 ` [PATCH 01/24] csiostor: use fc_block_rport() Hannes Reinecke
2022-05-03 14:06 ` Christoph Hellwig
2022-05-03 14:43 ` Johannes Thumshirn
2022-05-03 16:09 ` Bart Van Assche
2022-05-02 21:37 ` [PATCH 02/24] fc_fcp: " Hannes Reinecke
2022-05-03 14:06 ` Christoph Hellwig
2022-05-03 14:44 ` Johannes Thumshirn
2022-05-03 16:09 ` Bart Van Assche
2022-05-02 21:37 ` [PATCH 03/24] zfcp: open-code fc_block_scsi_eh() for host reset Hannes Reinecke
2022-05-03 14:06 ` Christoph Hellwig
2022-05-03 17:21 ` Steffen Maier
2022-05-03 18:42 ` Hannes Reinecke
2022-05-02 21:38 ` [PATCH 04/24] mptfc: simplify mpt_fc_block_error_handler() Hannes Reinecke
2022-05-03 14:07 ` Christoph Hellwig
2022-05-02 21:38 ` [PATCH 05/24] mptfusion: correct definitions for mptscsih_dev_reset() Hannes Reinecke
2022-05-03 14:07 ` Christoph Hellwig
2022-05-02 21:38 ` [PATCH 06/24] mptfc: open-code mptfc_block_error_handler() for bus reset Hannes Reinecke
2022-05-03 14:08 ` Christoph Hellwig
2022-05-02 21:38 ` [PATCH 07/24] qedf: use fc rport as argument for qedf_initiate_tmf() Hannes Reinecke
2022-05-03 14:08 ` Christoph Hellwig
2022-05-02 21:38 ` Hannes Reinecke [this message]
2022-05-03 14:08 ` [PATCH 08/24] bnx2fc: Do not rely on a scsi command for lun or target reset Christoph Hellwig
2022-05-02 21:38 ` [PATCH 09/24] ibmvfc: open-code reset loop for " Hannes Reinecke
2022-05-03 14:09 ` Christoph Hellwig
2022-05-02 21:38 ` [PATCH 10/24] ibmvfc: use fc_block_rport() Hannes Reinecke
2022-05-03 14:09 ` Christoph Hellwig
2022-05-03 15:20 ` Johannes Thumshirn
2022-05-03 16:11 ` Bart Van Assche
2022-05-02 21:38 ` [PATCH 11/24] fnic: use dedicated device reset command Hannes Reinecke
2022-05-03 14:09 ` Christoph Hellwig
2022-05-02 21:38 ` [PATCH 12/24] fnic: use fc_block_rport() correctly Hannes Reinecke
2022-05-03 14:10 ` Christoph Hellwig
2022-05-03 15:22 ` Johannes Thumshirn
2022-05-02 21:38 ` [PATCH 13/24] aic7xxx: make BUILD_SCSIID() a function Hannes Reinecke
2022-05-03 9:39 ` kernel test robot
2022-05-03 14:12 ` Christoph Hellwig
2022-05-03 14:18 ` Hannes Reinecke
2022-05-02 21:38 ` [PATCH 14/24] aic79xx: " Hannes Reinecke
2022-05-03 14:13 ` Christoph Hellwig
2022-05-03 14:19 ` Hannes Reinecke
2022-05-02 21:38 ` [PATCH 15/24] aic7xxx: do not reference scsi command when resetting device Hannes Reinecke
2022-05-03 14:13 ` Christoph Hellwig
2022-05-02 21:38 ` [PATCH 16/24] aic79xx: " Hannes Reinecke
2022-05-03 14:17 ` Christoph Hellwig
2022-05-03 15:25 ` Johannes Thumshirn
2022-05-02 21:38 ` [PATCH 17/24] snic: reserve tag for TMF Hannes Reinecke
2022-05-03 14:18 ` Christoph Hellwig
2022-05-03 15:41 ` Johannes Thumshirn
2022-05-03 16:18 ` Bart Van Assche
2022-05-03 18:31 ` Hannes Reinecke
2022-05-03 20:09 ` Bart Van Assche
2022-05-06 13:28 ` John Garry
2022-05-07 7:32 ` Hannes Reinecke
2022-05-09 6:44 ` John Garry
2022-05-02 21:38 ` [PATCH 18/24] snic: use dedicated device reset command Hannes Reinecke
2022-05-03 14:19 ` Christoph Hellwig
2022-05-02 21:38 ` [PATCH 19/24] snic: Use scsi_host_busy_iter() to traverse commands Hannes Reinecke
2022-05-03 14:19 ` Christoph Hellwig
2022-05-02 21:38 ` [PATCH 20/24] sym53c8xx_2: split off bus reset from host reset Hannes Reinecke
2022-05-03 14:20 ` Christoph Hellwig
2022-05-03 15:42 ` Johannes Thumshirn
2022-05-02 21:38 ` [PATCH 21/24] ips: Do not try to abort command " Hannes Reinecke
2022-05-03 14:20 ` Christoph Hellwig
2022-05-03 15:43 ` Johannes Thumshirn
2022-05-02 21:38 ` [PATCH 22/24] qla1280: separate out host reset function from qla1280_error_action() Hannes Reinecke
2022-05-03 14:20 ` Christoph Hellwig
2022-05-02 21:38 ` [PATCH 23/24] megaraid: pass in NULL scb for host reset Hannes Reinecke
2022-05-03 14:20 ` Christoph Hellwig
2022-05-03 16:09 ` Johannes Thumshirn
2022-05-02 21:38 ` [PATCH 24/24] mpi3mr: split off bus_reset function from host_reset Hannes Reinecke
2022-05-03 14:21 ` Christoph Hellwig
-- strict thread matches above, loose matches on Subject: below --
2022-05-03 20:06 [PATCHv2 00/24] scsi: EH rework prep patches, part 1 Hannes Reinecke
2022-05-03 20:06 ` [PATCH 08/24] bnx2fc: Do not rely on a scsi command for lun or target reset Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220502213820.3187-9-hare@suse.de \
--to=hare@suse.de \
--cc=hare@suse.com \
--cc=hch@lst.de \
--cc=james.bottomley@hansenpartnership.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=skashyap@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox