From: Bradley Grove <bradley.grove@gmail.com>
To: linux-scsi@vger.kernel.org
Cc: james.smart@broadcom.com, dick.kennedy@broadcom.com,
jejb@linux.ibm.com, martin.petersen@oracle.com,
Bradley Grove <bgrove@attotech.com>,
Jason Seba <jseba@attotech.com>
Subject: [PATCH REPOST] scsi: lpfc: Add support for ATTO Fibre Channel devices
Date: Tue, 24 May 2022 08:56:21 -0400 [thread overview]
Message-ID: <20220524125621.47102-1-bgrove@attotech.com> (raw)
Update pci_device_id table and generate reporting strings for ATTO
Celerity and ThunderLink Fibre Channel devices.
Co-developed-by: Jason Seba <jseba@attotech.com>
Signed-off-by: Jason Seba <jseba@attotech.com>
Signed-off-by: Bradley Grove <bgrove@attotech.com>
---
drivers/scsi/lpfc/lpfc_hw.h | 22 +++++++++
drivers/scsi/lpfc/lpfc_ids.h | 30 ++++++++++++
drivers/scsi/lpfc/lpfc_init.c | 89 +++++++++++++++++++++++++++++++++++
3 files changed, 141 insertions(+)
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index d6050f3c9efe..74a02586fe55 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1738,6 +1738,28 @@ struct lpfc_fdmi_reg_portattr {
#define PCI_DEVICE_ID_TOMCAT 0x0714
#define PCI_DEVICE_ID_SKYHAWK 0x0724
#define PCI_DEVICE_ID_SKYHAWK_VF 0x072c
+#define PCI_VENDOR_ID_ATTO 0x117c
+#define PCI_DEVICE_ID_CLRY_16XE 0x0064
+#define PCI_DEVICE_ID_CLRY_161E 0x0063
+#define PCI_DEVICE_ID_CLRY_162E 0x0064
+#define PCI_DEVICE_ID_CLRY_164E 0x0065
+#define PCI_DEVICE_ID_CLRY_16XP 0x0094
+#define PCI_DEVICE_ID_CLRY_161P 0x00a0
+#define PCI_DEVICE_ID_CLRY_162P 0x0094
+#define PCI_DEVICE_ID_CLRY_164P 0x00a1
+#define PCI_DEVICE_ID_CLRY_32XE 0x0094
+#define PCI_DEVICE_ID_CLRY_321E 0x00a2
+#define PCI_DEVICE_ID_CLRY_322E 0x00a3
+#define PCI_DEVICE_ID_CLRY_324E 0x00ac
+#define PCI_DEVICE_ID_CLRY_32XP 0x00bb
+#define PCI_DEVICE_ID_CLRY_321P 0x00bc
+#define PCI_DEVICE_ID_CLRY_322P 0x00bd
+#define PCI_DEVICE_ID_CLRY_324P 0x00be
+#define PCI_DEVICE_ID_TLFC_2 0x0064
+#define PCI_DEVICE_ID_TLFC_2XX2 0x4064
+#define PCI_DEVICE_ID_TLFC_3 0x0094
+#define PCI_DEVICE_ID_TLFC_3162 0x40a6
+#define PCI_DEVICE_ID_TLFC_3322 0x40a7
#define JEDEC_ID_ADDRESS 0x0080001c
#define FIREFLY_JEDEC_ID 0x1ACC
diff --git a/drivers/scsi/lpfc/lpfc_ids.h b/drivers/scsi/lpfc/lpfc_ids.h
index 6a90e6e53d09..a1b9be245560 100644
--- a/drivers/scsi/lpfc/lpfc_ids.h
+++ b/drivers/scsi/lpfc/lpfc_ids.h
@@ -124,5 +124,35 @@ const struct pci_device_id lpfc_id_table[] = {
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SKYHAWK_VF,
PCI_ANY_ID, PCI_ANY_ID, },
+ {PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_16XE,
+ PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_161E, },
+ {PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_16XE,
+ PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_162E, },
+ {PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_16XE,
+ PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_164E, },
+ {PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_16XP,
+ PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_161P, },
+ {PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_16XP,
+ PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_162P, },
+ {PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_16XP,
+ PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_164P, },
+ {PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_32XE,
+ PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_321E, },
+ {PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_32XE,
+ PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_322E, },
+ {PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_32XE,
+ PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_324E, },
+ {PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_32XP,
+ PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_321P, },
+ {PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_32XP,
+ PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_322P, },
+ {PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_32XP,
+ PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_CLRY_324P, },
+ {PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_TLFC_2,
+ PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_TLFC_2XX2, },
+ {PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_TLFC_3,
+ PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_TLFC_3162, },
+ {PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_TLFC_3,
+ PCI_VENDOR_ID_ATTO, PCI_DEVICE_ID_TLFC_3322, },
{ 0 }
};
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 461d333b1b3a..45a71ab55be8 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -2408,6 +2408,90 @@ lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len)
return(1);
}
+/**
+ * lpfc_get_atto_model_desc - Retrieve ATTO HBA device model name and description
+ * @phba: pointer to lpfc hba data structure.
+ * @mdp: pointer to the data structure to hold the derived model name.
+ * @descp: pointer to the data structure to hold the derived description.
+ *
+ * This routine retrieves HBA's description based on its registered PCI device
+ * ID. The @descp passed into this function points to an array of 256 chars. It
+ * shall be returned with the model name, maximum speed, and the host bus type.
+ * The @mdp passed into this function points to an array of 80 chars. When the
+ * function returns, the @mdp will be filled with the model name.
+ **/
+static void
+lpfc_get_atto_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
+{
+ uint16_t sub_dev_id = phba->pcidev->subsystem_device;
+ char *model = "<Unknown>";
+ int tbolt = 0;
+
+ switch (sub_dev_id) {
+ case PCI_DEVICE_ID_CLRY_161E:
+ model = "161E";
+ break;
+ case PCI_DEVICE_ID_CLRY_162E:
+ model = "162E";
+ break;
+ case PCI_DEVICE_ID_CLRY_164E:
+ model = "164E";
+ break;
+ case PCI_DEVICE_ID_CLRY_161P:
+ model = "161P";
+ break;
+ case PCI_DEVICE_ID_CLRY_162P:
+ model = "162P";
+ break;
+ case PCI_DEVICE_ID_CLRY_164P:
+ model = "164P";
+ break;
+ case PCI_DEVICE_ID_CLRY_321E:
+ model = "321E";
+ break;
+ case PCI_DEVICE_ID_CLRY_322E:
+ model = "322E";
+ break;
+ case PCI_DEVICE_ID_CLRY_324E:
+ model = "324E";
+ break;
+ case PCI_DEVICE_ID_CLRY_321P:
+ model = "321P";
+ break;
+ case PCI_DEVICE_ID_CLRY_322P:
+ model = "322P";
+ break;
+ case PCI_DEVICE_ID_CLRY_324P:
+ model = "324P";
+ break;
+ case PCI_DEVICE_ID_TLFC_2XX2:
+ model = "2XX2";
+ tbolt = 1;
+ break;
+ case PCI_DEVICE_ID_TLFC_3162:
+ model = "3162";
+ tbolt = 1;
+ break;
+ case PCI_DEVICE_ID_TLFC_3322:
+ model = "3322";
+ tbolt = 1;
+ break;
+ default:
+ model = "Unknown";
+ break;
+ }
+
+ if (mdp && mdp[0] == '\0')
+ snprintf(mdp, 79, "%s", model);
+
+ if (descp && descp[0] == '\0')
+ snprintf(descp, 255,
+ "ATTO %s%s, Fibre Channel Adapter Initiator, Port %s",
+ (tbolt) ? "ThunderLink FC " : "Celerity FC-",
+ model,
+ phba->Port);
+}
+
/**
* lpfc_get_hba_model_desc - Retrieve HBA device model name and description
* @phba: pointer to lpfc hba data structure.
@@ -2438,6 +2522,11 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
&& descp && descp[0] != '\0')
return;
+ if (phba->pcidev->vendor == PCI_VENDOR_ID_ATTO) {
+ lpfc_get_atto_model_desc(phba, mdp, descp);
+ return;
+ }
+
if (phba->lmt & LMT_64Gb)
max_speed = 64;
else if (phba->lmt & LMT_32Gb)
--
2.36.0
next reply other threads:[~2022-05-24 12:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-24 12:56 Bradley Grove [this message]
2022-05-25 9:51 ` [PATCH REPOST] scsi: lpfc: Add support for ATTO Fibre Channel devices Hannes Reinecke
2022-05-25 20:48 ` James Smart
2022-06-02 2:41 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220524125621.47102-1-bgrove@attotech.com \
--to=bradley.grove@gmail.com \
--cc=bgrove@attotech.com \
--cc=dick.kennedy@broadcom.com \
--cc=james.smart@broadcom.com \
--cc=jejb@linux.ibm.com \
--cc=jseba@attotech.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox