From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>,
linux-scsi@vger.kernel.org, Bart Van Assche <bvanassche@acm.org>,
Christoph Hellwig <hch@lst.de>, Ming Lei <ming.lei@redhat.com>,
Hannes Reinecke <hare@suse.de>,
John Garry <john.garry@huawei.com>,
Li Zhijian <lizhijian@fujitsu.com>
Subject: [PATCH v3 2/2] scsi: core: Call blk_mq_free_tag_set() earlier
Date: Thu, 7 Jul 2022 11:21:22 -0700 [thread overview]
Message-ID: <20220707182122.3797-3-bvanassche@acm.org> (raw)
In-Reply-To: <20220707182122.3797-1-bvanassche@acm.org>
There are two .exit_cmd_priv implementations. Both implementations use
resources associated with the SCSI host. Make sure that these resources are
still available when .exit_cmd_priv is called by moving the .exit_cmd_priv
calls from scsi_host_dev_release() to scsi_forget_host(). Moving
blk_mq_free_tag_set() from scsi_host_dev_release() to scsi_forget_host() is
safe because scsi_forget_host() waits until all request queues associated
with the host have been removed.
This patch fixes the following use-after-free:
==================================================================
BUG: KASAN: use-after-free in srp_exit_cmd_priv+0x27/0xd0 [ib_srp]
Read of size 8 at addr ffff888100337000 by task multipathd/16727
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report.cold+0x5e/0x5db
kasan_report+0xab/0x120
srp_exit_cmd_priv+0x27/0xd0 [ib_srp]
scsi_mq_exit_request+0x4d/0x70
blk_mq_free_rqs+0x143/0x410
__blk_mq_free_map_and_rqs+0x6e/0x100
blk_mq_free_tag_set+0x2b/0x160
scsi_host_dev_release+0xf3/0x1a0
device_release+0x54/0xe0
kobject_put+0xa5/0x120
device_release+0x54/0xe0
kobject_put+0xa5/0x120
scsi_device_dev_release_usercontext+0x4c1/0x4e0
execute_in_process_context+0x23/0x90
device_release+0x54/0xe0
kobject_put+0xa5/0x120
scsi_disk_release+0x3f/0x50
device_release+0x54/0xe0
kobject_put+0xa5/0x120
disk_release+0x17f/0x1b0
device_release+0x54/0xe0
kobject_put+0xa5/0x120
dm_put_table_device+0xa3/0x160 [dm_mod]
dm_put_device+0xd0/0x140 [dm_mod]
free_priority_group+0xd8/0x110 [dm_multipath]
free_multipath+0x94/0xe0 [dm_multipath]
dm_table_destroy+0xa2/0x1e0 [dm_mod]
__dm_destroy+0x196/0x350 [dm_mod]
dev_remove+0x10c/0x160 [dm_mod]
ctl_ioctl+0x2c2/0x590 [dm_mod]
dm_ctl_ioctl+0x5/0x10 [dm_mod]
__x64_sys_ioctl+0xb4/0xf0
dm_ctl_ioctl+0x5/0x10 [dm_mod]
__x64_sys_ioctl+0xb4/0xf0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Reported-by: Li Zhijian <lizhijian@fujitsu.com>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Fixes: 65ca846a5314 ("scsi: core: Introduce {init,exit}_cmd_priv()")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
drivers/scsi/hosts.c | 10 +++++-----
drivers/scsi/scsi_lib.c | 3 +++
2 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index e0a56a8f1f74..643140b22eb9 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -198,6 +198,8 @@ void scsi_remove_host(struct Scsi_Host *shost)
* the dependent SCSI targets and devices are gone before returning.
*/
wait_event(shost->targets_wq, atomic_read(&shost->target_count) == 0);
+
+ scsi_mq_destroy_tags(shost);
}
EXPORT_SYMBOL(scsi_remove_host);
@@ -303,8 +305,8 @@ int scsi_add_host_with_dma(struct Scsi_Host *shost, struct device *dev,
return error;
/*
- * Any host allocation in this function will be freed in
- * scsi_host_dev_release().
+ * Any resources associated with the SCSI host in this function except
+ * the tag set will be freed by scsi_host_dev_release().
*/
out_del_dev:
device_del(&shost->shost_dev);
@@ -320,6 +322,7 @@ int scsi_add_host_with_dma(struct Scsi_Host *shost, struct device *dev,
pm_runtime_disable(&shost->shost_gendev);
pm_runtime_set_suspended(&shost->shost_gendev);
pm_runtime_put_noidle(&shost->shost_gendev);
+ scsi_mq_destroy_tags(shost);
fail:
return error;
}
@@ -353,9 +356,6 @@ static void scsi_host_dev_release(struct device *dev)
kfree(dev_name(&shost->shost_dev));
}
- if (shost->tag_set.tags)
- scsi_mq_destroy_tags(shost);
-
kfree(shost->shost_data);
ida_free(&host_index_ida, shost->host_no);
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 6ffc9e4258a8..1aa1a279f8f3 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1990,7 +1990,10 @@ int scsi_mq_setup_tags(struct Scsi_Host *shost)
void scsi_mq_destroy_tags(struct Scsi_Host *shost)
{
+ if (!shost->tag_set.tags)
+ return;
blk_mq_free_tag_set(&shost->tag_set);
+ WARN_ON_ONCE(shost->tag_set.tags);
}
/**
prev parent reply other threads:[~2022-07-07 18:21 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-07 18:21 [PATCH v3 0/2] Call blk_mq_free_tag_set() earlier Bart Van Assche
2022-07-07 18:21 ` [PATCH v3 1/2] scsi: core: Make sure that hosts outlive targets and devices Bart Van Assche
2022-07-09 15:57 ` Mike Christie
2022-07-12 22:29 ` Bart Van Assche
2022-07-14 15:32 ` Mike Christie
2022-07-14 15:40 ` Mike Christie
2022-07-14 19:04 ` Bart Van Assche
2022-07-07 18:21 ` Bart Van Assche [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220707182122.3797-3-bvanassche@acm.org \
--to=bvanassche@acm.org \
--cc=hare@suse.de \
--cc=hch@lst.de \
--cc=jaegeuk@kernel.org \
--cc=john.garry@huawei.com \
--cc=linux-scsi@vger.kernel.org \
--cc=lizhijian@fujitsu.com \
--cc=martin.petersen@oracle.com \
--cc=ming.lei@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox