From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Brian King <brking@linux.vnet.ibm.com>,
"Martin K . Petersen" <martin.petersen@oracle.com>,
Sasha Levin <sashal@kernel.org>,
tyreld@linux.ibm.com, mpe@ellerman.id.au, jejb@linux.ibm.com,
linux-scsi@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: [PATCH AUTOSEL 5.15 18/27] scsi: ibmvfc: Avoid path failures during live migration
Date: Fri, 18 Nov 2022 21:13:43 -0500 [thread overview]
Message-ID: <20221119021352.1774592-18-sashal@kernel.org> (raw)
In-Reply-To: <20221119021352.1774592-1-sashal@kernel.org>
From: Brian King <brking@linux.vnet.ibm.com>
[ Upstream commit 62fa3ce05d5d73c5eccc40b2db493f55fecfc446 ]
Fix an issue reported when performing a live migration when multipath is
configured with a short fast fail timeout of 5 seconds and also to have
no_path_retry set to fail. In this scenario, all paths would go into the
devloss state while the ibmvfc driver went through discovery to log back
in. On a loaded system, the discovery might take longer than 5 seconds,
which was resulting in all paths being marked failed, which then resulted
in a read only filesystem.
This patch changes the migration code in ibmvfc to avoid deleting rports at
all in this scenario, so we avoid losing all paths.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20221026181356.148517-1-brking@linux.vnet.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index b3531065a438..45ef78f388dc 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -708,8 +708,13 @@ static void ibmvfc_init_host(struct ibmvfc_host *vhost)
memset(vhost->async_crq.msgs.async, 0, PAGE_SIZE);
vhost->async_crq.cur = 0;
- list_for_each_entry(tgt, &vhost->targets, queue)
- ibmvfc_del_tgt(tgt);
+ list_for_each_entry(tgt, &vhost->targets, queue) {
+ if (vhost->client_migrated)
+ tgt->need_login = 1;
+ else
+ ibmvfc_del_tgt(tgt);
+ }
+
scsi_block_requests(vhost->host);
ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT);
vhost->job_step = ibmvfc_npiv_login;
@@ -3235,9 +3240,12 @@ static void ibmvfc_handle_crq(struct ibmvfc_crq *crq, struct ibmvfc_host *vhost,
/* We need to re-setup the interpartition connection */
dev_info(vhost->dev, "Partition migrated, Re-enabling adapter\n");
vhost->client_migrated = 1;
+
+ scsi_block_requests(vhost->host);
ibmvfc_purge_requests(vhost, DID_REQUEUE);
- ibmvfc_link_down(vhost, IBMVFC_LINK_DOWN);
+ ibmvfc_set_host_state(vhost, IBMVFC_LINK_DOWN);
ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_REENABLE);
+ wake_up(&vhost->work_wait_q);
} else if (crq->format == IBMVFC_PARTNER_FAILED || crq->format == IBMVFC_PARTNER_DEREGISTER) {
dev_err(vhost->dev, "Host partner adapter deregistered or failed (rc=%d)\n", crq->format);
ibmvfc_purge_requests(vhost, DID_ERROR);
--
2.35.1
next parent reply other threads:[~2022-11-19 2:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20221119021352.1774592-1-sashal@kernel.org>
2022-11-19 2:13 ` Sasha Levin [this message]
2022-11-19 2:13 ` [PATCH AUTOSEL 5.15 19/27] scsi: scsi_debug: Make the READ CAPACITY response compliant with ZBC Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221119021352.1774592-18-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=brking@linux.vnet.ibm.com \
--cc=jejb@linux.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=martin.petersen@oracle.com \
--cc=mpe@ellerman.id.au \
--cc=stable@vger.kernel.org \
--cc=tyreld@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox