From: <peter.wang@mediatek.com>
To: <stanley.chu@mediatek.com>, <linux-scsi@vger.kernel.org>,
<martin.petersen@oracle.com>, <avri.altman@wdc.com>,
<alim.akhtar@samsung.com>, <jejb@linux.ibm.com>
Cc: <wsd_upstream@mediatek.com>, <linux-mediatek@lists.infradead.org>,
<peter.wang@mediatek.com>, <chun-hung.wu@mediatek.com>,
<alice.chao@mediatek.com>, <cc.chou@mediatek.com>,
<chaotian.jing@mediatek.com>, <jiajie.hao@mediatek.com>,
<powen.kao@mediatek.com>, <qilin.tan@mediatek.com>,
<lin.gui@mediatek.com>, <tun-yu.yu@mediatek.com>,
<eddie.huang@mediatek.com>, <naomi.chu@mediatek.com>,
<stable@vger.kernel.org>
Subject: [PATCH v6] ufs: core: wlun suspend SSU/enter hibern8 fail recovery
Date: Thu, 8 Dec 2022 15:25:20 +0800 [thread overview]
Message-ID: <20221208072520.26210-1-peter.wang@mediatek.com> (raw)
From: Peter Wang <peter.wang@mediatek.com>
When SSU/enter hibern8 fail in wlun suspend flow, trigger error
handler and return busy to break the suspend.
If not, wlun runtime pm status become error and the consumer will
stuck in runtime suspend status.
Fixes: b294ff3e3449 ("scsi: ufs: core: Enable power management for wlun")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/ufs/core/ufshcd.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index b1f59a5fe632..31ed3fdb5266 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -6070,6 +6070,14 @@ void ufshcd_schedule_eh_work(struct ufs_hba *hba)
}
}
+static void ufshcd_force_error_recovery(struct ufs_hba *hba)
+{
+ spin_lock_irq(hba->host->host_lock);
+ hba->force_reset = true;
+ ufshcd_schedule_eh_work(hba);
+ spin_unlock_irq(hba->host->host_lock);
+}
+
static void ufshcd_clk_scaling_allow(struct ufs_hba *hba, bool allow)
{
down_write(&hba->clk_scaling_lock);
@@ -9049,6 +9057,15 @@ static int __ufshcd_wl_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
if (!hba->dev_info.b_rpm_dev_flush_capable) {
ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
+ if (ret && pm_op != UFS_SHUTDOWN_PM) {
+ /*
+ * If return err in suspend flow, IO will hang.
+ * Trigger error handler and break suspend for
+ * error recovery.
+ */
+ ufshcd_force_error_recovery(hba);
+ ret = -EBUSY;
+ }
if (ret)
goto enable_scaling;
}
@@ -9060,6 +9077,15 @@ static int __ufshcd_wl_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
*/
check_for_bkops = !ufshcd_is_ufs_dev_deepsleep(hba);
ret = ufshcd_link_state_transition(hba, req_link_state, check_for_bkops);
+ if (ret && pm_op != UFS_SHUTDOWN_PM) {
+ /*
+ * If return err in suspend flow, IO will hang.
+ * Trigger error handler and break suspend for
+ * error recovery.
+ */
+ ufshcd_force_error_recovery(hba);
+ ret = -EBUSY;
+ }
if (ret)
goto set_dev_active;
--
2.18.0
next reply other threads:[~2022-12-08 7:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-08 7:25 peter.wang [this message]
2022-12-08 8:02 ` [PATCH v6] ufs: core: wlun suspend SSU/enter hibern8 fail recovery Greg KH
2022-12-14 3:16 ` Martin K. Petersen
2022-12-20 21:00 ` Daniil Lunev
2022-12-21 5:59 ` Peter Wang (王信友)
2023-01-02 22:05 ` Daniil Lunev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221208072520.26210-1-peter.wang@mediatek.com \
--to=peter.wang@mediatek.com \
--cc=alice.chao@mediatek.com \
--cc=alim.akhtar@samsung.com \
--cc=avri.altman@wdc.com \
--cc=cc.chou@mediatek.com \
--cc=chaotian.jing@mediatek.com \
--cc=chun-hung.wu@mediatek.com \
--cc=eddie.huang@mediatek.com \
--cc=jejb@linux.ibm.com \
--cc=jiajie.hao@mediatek.com \
--cc=lin.gui@mediatek.com \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=naomi.chu@mediatek.com \
--cc=powen.kao@mediatek.com \
--cc=qilin.tan@mediatek.com \
--cc=stable@vger.kernel.org \
--cc=stanley.chu@mediatek.com \
--cc=tun-yu.yu@mediatek.com \
--cc=wsd_upstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox