From: Ranjan Kumar <ranjan.kumar@broadcom.com>
To: linux-scsi@vger.kernel.org, martin.petersen@oracle.com
Cc: rajsekhar.chundru@broadcom.com, sathya.prakash@broadcom.com,
sumit.saxena@broadcom.com,
Ranjan Kumar <ranjan.kumar@broadcom.com>,
Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Subject: [PATCH 4/6] mpi3mr: appropriate return values for failures in firmware init path
Date: Tue, 28 Feb 2023 06:08:33 -0800 [thread overview]
Message-ID: <20230228140835.4075-5-ranjan.kumar@broadcom.com> (raw)
In-Reply-To: <20230228140835.4075-1-ranjan.kumar@broadcom.com>
[-- Attachment #1: Type: text/plain, Size: 2275 bytes --]
The driver is modified to return a proper non-zero return value for all
the cases when the controller initialization and re-initialization fails.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
---
drivers/scsi/mpi3mr/mpi3mr_fw.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index e5c0bc6d47d5..8f20dc87bebf 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -3856,8 +3856,10 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
dprint_init(mrioc, "allocating config page buffers\n");
mrioc->cfg_page = dma_alloc_coherent(&mrioc->pdev->dev,
MPI3MR_DEFAULT_CFG_PAGE_SZ, &mrioc->cfg_page_dma, GFP_KERNEL);
- if (!mrioc->cfg_page)
+ if (!mrioc->cfg_page) {
+ retval = -1;
goto out_failed_noretry;
+ }
mrioc->cfg_page_sz = MPI3MR_DEFAULT_CFG_PAGE_SZ;
@@ -3919,8 +3921,10 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
dprint_init(mrioc, "allocating memory for throttle groups\n");
sz = sizeof(struct mpi3mr_throttle_group_info);
mrioc->throttle_groups = kcalloc(mrioc->num_io_throttle_group, sz, GFP_KERNEL);
- if (!mrioc->throttle_groups)
+ if (!mrioc->throttle_groups) {
+ retval = -1;
goto out_failed_noretry;
+ }
}
retval = mpi3mr_enable_events(mrioc);
@@ -3940,6 +3944,7 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
mpi3mr_memset_buffers(mrioc);
goto retry_init;
}
+ retval = -1;
out_failed_noretry:
ioc_err(mrioc, "controller initialization failed\n");
mpi3mr_issue_reset(mrioc, MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT,
@@ -4052,6 +4057,7 @@ int mpi3mr_reinit_ioc(struct mpi3mr_ioc *mrioc, u8 is_resume)
ioc_err(mrioc,
"cannot create minimum number of operational queues expected:%d created:%d\n",
mrioc->shost->nr_hw_queues, mrioc->num_op_reply_q);
+ retval = -1;
goto out_failed_noretry;
}
@@ -4118,6 +4124,7 @@ int mpi3mr_reinit_ioc(struct mpi3mr_ioc *mrioc, u8 is_resume)
mpi3mr_memset_buffers(mrioc);
goto retry_init;
}
+ retval = -1;
out_failed_noretry:
ioc_err(mrioc, "controller %s is failed\n",
(is_resume)?"resume":"re-initialization");
--
2.31.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4209 bytes --]
next prev parent reply other threads:[~2023-02-28 14:09 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-28 14:08 [PATCH 0/6] This patchset contains critical Bug fixes Ranjan Kumar
2023-02-28 14:08 ` [PATCH 1/6] mpi3mr: IOCTL timeout when disable/enable Interpt Ranjan Kumar
2023-02-28 14:08 ` [PATCH 2/6] mpi3mr: Driver unload crash host when enhanced logging is enabled Ranjan Kumar
2023-02-28 14:08 ` [PATCH 3/6] mpi3mr: Wait for diagnostic save during controller init Ranjan Kumar
2023-02-28 14:08 ` Ranjan Kumar [this message]
2023-02-28 14:08 ` [PATCH 5/6] mpi3mr: NVMe commands size greater than 8K fails Ranjan Kumar
2023-02-28 14:08 ` [PATCH 6/6] mpi3mr: Bad drive in topology results kernel crash Ranjan Kumar
2023-03-07 2:57 ` [PATCH 0/6] This patchset contains critical Bug fixes Martin K. Petersen
2023-03-27 16:13 ` Salvatore Bonaccorso
2023-04-03 1:04 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230228140835.4075-5-ranjan.kumar@broadcom.com \
--to=ranjan.kumar@broadcom.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=rajsekhar.chundru@broadcom.com \
--cc=sathya.prakash@broadcom.com \
--cc=sreekanth.reddy@broadcom.com \
--cc=sumit.saxena@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox