From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org, Bart Van Assche <bvanassche@acm.org>
Subject: [PATCH v2 2/4] scsi: ufs: Fix handling of lrbp->cmd
Date: Wed, 17 May 2023 15:31:55 -0700 [thread overview]
Message-ID: <20230517223157.1068210-3-bvanassche@acm.org> (raw)
In-Reply-To: <20230517223157.1068210-1-bvanassche@acm.org>
ufshcd_queuecommand() may be called two times in a row for a SCSI
command before it is completed. Hence make the following changes:
- In the functions that submit a command, do not check the old value of
lrbp->cmd nor clear lrbp->cmd in error paths.
- In ufshcd_release_scsi_cmd(), do not clear lrbp->cmd.
See also scsi_send_eh_cmnd().
This patch prevents that the following appears if a command times out:
WARNING: at drivers/ufs/core/ufshcd.c:2965 ufshcd_queuecommand+0x6f8/0x9a8
Call trace:
ufshcd_queuecommand+0x6f8/0x9a8
scsi_send_eh_cmnd+0x2c0/0x960
scsi_eh_test_devices+0x100/0x314
scsi_eh_ready_devs+0xd90/0x114c
scsi_error_handler+0x2b4/0xb70
kthread+0x16c/0x1e0
Fixes: 5a0b0cb9bee7 ("[SCSI] ufs: Add support for sending NOP OUT UPIU")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
drivers/ufs/core/ufshcd.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 37337d411466..68d9e24fac98 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -2928,7 +2928,6 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
(hba->clk_gating.state != CLKS_ON));
lrbp = &hba->lrb[tag];
- WARN_ON(lrbp->cmd);
lrbp->cmd = cmd;
lrbp->task_tag = tag;
lrbp->lun = ufshcd_scsi_to_upiu_lun(cmd->device->lun);
@@ -2944,7 +2943,6 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
err = ufshcd_map_sg(hba, lrbp);
if (err) {
- lrbp->cmd = NULL;
ufshcd_release(hba);
goto out;
}
@@ -5405,7 +5403,6 @@ static void ufshcd_release_scsi_cmd(struct ufs_hba *hba,
struct scsi_cmnd *cmd = lrbp->cmd;
scsi_dma_unmap(cmd);
- lrbp->cmd = NULL; /* Mark the command as completed. */
ufshcd_release(hba);
ufshcd_clk_scaling_update_busy(hba);
}
@@ -7020,7 +7017,6 @@ static int ufshcd_issue_devman_upiu_cmd(struct ufs_hba *hba,
down_read(&hba->clk_scaling_lock);
lrbp = &hba->lrb[tag];
- WARN_ON(lrbp->cmd);
lrbp->cmd = NULL;
lrbp->task_tag = tag;
lrbp->lun = 0;
@@ -7192,7 +7188,6 @@ int ufshcd_advanced_rpmb_req_handler(struct ufs_hba *hba, struct utp_upiu_req *r
down_read(&hba->clk_scaling_lock);
lrbp = &hba->lrb[tag];
- WARN_ON(lrbp->cmd);
lrbp->cmd = NULL;
lrbp->task_tag = tag;
lrbp->lun = UFS_UPIU_RPMB_WLUN;
next prev parent reply other threads:[~2023-05-17 22:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-17 22:31 [PATCH v2 0/4] UFS host controller driver patches Bart Van Assche
2023-05-17 22:31 ` [PATCH v2 1/4] scsi: ufs: Increase the START STOP UNIT timeout from one to ten seconds Bart Van Assche
2023-05-17 22:31 ` Bart Van Assche [this message]
2023-05-24 12:21 ` [PATCH v2 2/4] scsi: ufs: Fix handling of lrbp->cmd Adrian Hunter
2023-05-24 15:44 ` Bart Van Assche
2023-05-17 22:31 ` [PATCH v2 3/4] scsi: ufs: Move ufshcd_wl_shutdown() Bart Van Assche
2023-05-24 12:45 ` Adrian Hunter
2023-05-17 22:31 ` [PATCH v2 4/4] scsi: ufs: Simplify driver shutdown Bart Van Assche
2023-05-24 12:48 ` Adrian Hunter
2023-05-22 19:39 ` [PATCH v2 0/4] UFS host controller driver patches Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230517223157.1068210-3-bvanassche@acm.org \
--to=bvanassche@acm.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).