From: Damien Le Moal <dlemoal@kernel.org>
To: linux-ide@vger.kernel.org, linux-scsi@vger.kernel.org,
"Martin K . Petersen" <martin.petersen@oracle.com>
Cc: John Garry <john.g.garry@oracle.com>, Jason Yan <yanaijie@huawei.com>
Subject: [PATCH] ata: libata-sata: Simplify ata_change_queue_depth()
Date: Fri, 2 Jun 2023 07:26:07 +0900 [thread overview]
Message-ID: <20230601222607.263024-1-dlemoal@kernel.org> (raw)
Commit 141f3d6256e5 ("ata: libata-sata: Fix device queue depth control")
added a struct ata_device argument to ata_change_queue_depth() to
address problems with changing the queue depth of ATA devices managed
through libsas. This was due to problems with ata_scsi_find_dev() which
are now fixed with commit 7f875850f20a ("ata: libata-scsi: Use correct
device no in ata_find_dev()").
Undo some of the changes of commit 141f3d6256e5: remove the added struct
ata_device aregument and use again ata_scsi_find_dev() to find the
target ATA device structure. While doing this, also make sure that
ata_scsi_find_dev() is called with ap->lock held, as it should.
libsas and libata call sites of ata_change_queue_depth() are updated to
match the modified function arguments.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
---
drivers/ata/libata-sata.c | 19 ++++++++++---------
drivers/scsi/libsas/sas_scsi_host.c | 3 +--
include/linux/libata.h | 4 ++--
3 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index f3e7396e3191..e3c9cb617048 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -1023,7 +1023,6 @@ EXPORT_SYMBOL_GPL(dev_attr_sw_activity);
/**
* ata_change_queue_depth - Set a device maximum queue depth
* @ap: ATA port of the target device
- * @dev: target ATA device
* @sdev: SCSI device to configure queue depth for
* @queue_depth: new queue depth
*
@@ -1031,24 +1030,27 @@ EXPORT_SYMBOL_GPL(dev_attr_sw_activity);
* and libata.
*
*/
-int ata_change_queue_depth(struct ata_port *ap, struct ata_device *dev,
- struct scsi_device *sdev, int queue_depth)
+int ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev,
+ int queue_depth)
{
+ struct ata_device *dev;
unsigned long flags;
- if (!dev || !ata_dev_enabled(dev))
- return sdev->queue_depth;
+ spin_lock_irqsave(ap->lock, flags);
- if (queue_depth < 1 || queue_depth == sdev->queue_depth)
+ dev = ata_scsi_find_dev(ap, sdev);
+ if (!dev || queue_depth < 1 || queue_depth == sdev->queue_depth) {
+ spin_unlock_irqrestore(ap->lock, flags);
return sdev->queue_depth;
+ }
/* NCQ enabled? */
- spin_lock_irqsave(ap->lock, flags);
dev->flags &= ~ATA_DFLAG_NCQ_OFF;
if (queue_depth == 1 || !ata_ncq_enabled(dev)) {
dev->flags |= ATA_DFLAG_NCQ_OFF;
queue_depth = 1;
}
+
spin_unlock_irqrestore(ap->lock, flags);
/* limit and apply queue depth */
@@ -1082,8 +1084,7 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth)
{
struct ata_port *ap = ata_shost_to_port(sdev->host);
- return ata_change_queue_depth(ap, ata_scsi_find_dev(ap, sdev),
- sdev, queue_depth);
+ return ata_change_queue_depth(ap, sdev, queue_depth);
}
EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth);
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index a36fa1c128a8..94c5f14f3c16 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -872,8 +872,7 @@ int sas_change_queue_depth(struct scsi_device *sdev, int depth)
struct domain_device *dev = sdev_to_domain_dev(sdev);
if (dev_is_sata(dev))
- return ata_change_queue_depth(dev->sata_dev.ap,
- sas_to_ata_dev(dev), sdev, depth);
+ return ata_change_queue_depth(dev->sata_dev.ap, sdev, depth);
if (!sdev->tagged_supported)
depth = 1;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 01f9fbb69f89..bc756f8586f3 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1144,8 +1144,8 @@ extern int ata_scsi_slave_config(struct scsi_device *sdev);
extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
int queue_depth);
-extern int ata_change_queue_depth(struct ata_port *ap, struct ata_device *dev,
- struct scsi_device *sdev, int queue_depth);
+extern int ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev,
+ int queue_depth);
extern struct ata_device *ata_dev_pair(struct ata_device *adev);
extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev);
extern void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap);
--
2.40.1
next reply other threads:[~2023-06-01 22:26 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-01 22:26 Damien Le Moal [this message]
2023-06-02 2:37 ` [PATCH] ata: libata-sata: Simplify ata_change_queue_depth() Jason Yan
2023-06-02 8:02 ` John Garry
2023-06-05 1:25 ` Damien Le Moal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230601222607.263024-1-dlemoal@kernel.org \
--to=dlemoal@kernel.org \
--cc=john.g.garry@oracle.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=yanaijie@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).