From: Thomas Gleixner <tglx@linutronix.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: x86@kernel.org, Tom Lendacky <thomas.lendacky@amd.com>,
Andrew Cooper <andrew.cooper3@citrix.com>,
Arjan van de Ven <arjan@linux.intel.com>,
"James E.J. Bottomley" <jejb@linux.ibm.com>,
Dick Kennedy <dick.kennedy@broadcom.com>,
James Smart <james.smart@broadcom.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
linux-scsi@vger.kernel.org, linux-hwmon@vger.kernel.org,
Jean Delvare <jdelvare@suse.com>, Huang Rui <ray.huang@amd.com>,
Guenter Roeck <linux@roeck-us.net>,
Steve Wahl <steve.wahl@hpe.com>,
Mike Travis <mike.travis@hpe.com>,
Dimitri Sivanich <dimitri.sivanich@hpe.com>,
Russ Anderson <russ.anderson@hpe.com>
Subject: [patch 19/29] x86/cpu/amd: Provide a separate acessor for Node ID
Date: Mon, 24 Jul 2023 19:44:20 +0200 (CEST) [thread overview]
Message-ID: <20230724172844.804554934@linutronix.de> (raw)
In-Reply-To: 20230724155329.474037902@linutronix.de
AMD (ab)uses topology_die_id() to store the Node ID information and
topology_max_dies_per_pkg to store the number of nodes per package.
This collides with the proper processor die level enumeration which is
coming on AMD with CPUID 8000_0026, unless there is a correlation between
the two. There is zero documentation about that.
So provide new storage and new accessors which for now still access die_id
and topology_max_dies_per_pkg. Will be mopped up after AMD and HYGON are
converted over.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/events/amd/core.c | 2 +-
arch/x86/include/asm/processor.h | 3 +++
arch/x86/include/asm/topology.h | 8 ++++++++
arch/x86/kernel/amd_nb.c | 4 ++--
arch/x86/kernel/cpu/cacheinfo.c | 2 +-
arch/x86/kernel/cpu/mce/amd.c | 4 ++--
arch/x86/kernel/cpu/mce/inject.c | 4 ++--
drivers/edac/amd64_edac.c | 4 ++--
drivers/edac/mce_amd.c | 4 ++--
9 files changed, 23 insertions(+), 12 deletions(-)
--- a/arch/x86/events/amd/core.c
+++ b/arch/x86/events/amd/core.c
@@ -574,7 +574,7 @@ static void amd_pmu_cpu_starting(int cpu
if (!x86_pmu.amd_nb_constraints)
return;
- nb_id = topology_die_id(cpu);
+ nb_id = topology_amd_node_id(cpu);
WARN_ON_ONCE(nb_id == BAD_APICID);
for_each_online_cpu(i) {
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -97,6 +97,9 @@ struct cpuinfo_topology {
u16 logical_pkg_id;
u16 logical_die_id;
+ // AMD Node ID and Nodes per Package info
+ u16 amd_node_id;
+
// Cache level topology IDs
u16 llc_id;
u16 l2c_id;
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -131,6 +131,8 @@ extern const struct cpumask *cpu_cluster
#define topology_core_id(cpu) (cpu_data(cpu).topo.core_id)
#define topology_ppin(cpu) (cpu_data(cpu).ppin)
+#define topology_amd_node_id(cpu) (cpu_data(cpu).topo.die_id)
+
extern unsigned int __max_die_per_package;
#ifdef CONFIG_SMP
@@ -160,6 +162,11 @@ int topology_update_die_map(unsigned int
int topology_phys_to_logical_pkg(unsigned int pkg);
bool topology_smt_supported(void);
+static inline unsigned int topology_amd_nodes_per_pkg(void)
+{
+ return __max_die_per_package;
+}
+
extern struct cpumask __cpu_primary_thread_mask;
#define cpu_primary_thread_mask ((const struct cpumask *)&__cpu_primary_thread_mask)
@@ -182,6 +189,7 @@ static inline int topology_max_die_per_p
static inline int topology_max_smt_threads(void) { return 1; }
static inline bool topology_is_primary_thread(unsigned int cpu) { return true; }
static inline bool topology_smt_supported(void) { return false; }
+static inline unsigned int topology_amd_nodes_per_pkg(void) { return 0; };
#endif /* !CONFIG_SMP */
static inline void arch_fix_phys_package_id(int num, u32 slot)
--- a/arch/x86/kernel/amd_nb.c
+++ b/arch/x86/kernel/amd_nb.c
@@ -370,7 +370,7 @@ struct resource *amd_get_mmconfig_range(
int amd_get_subcaches(int cpu)
{
- struct pci_dev *link = node_to_amd_nb(topology_die_id(cpu))->link;
+ struct pci_dev *link = node_to_amd_nb(topology_amd_node_id(cpu))->link;
unsigned int mask;
if (!amd_nb_has_feature(AMD_NB_L3_PARTITIONING))
@@ -384,7 +384,7 @@ int amd_get_subcaches(int cpu)
int amd_set_subcaches(int cpu, unsigned long mask)
{
static unsigned int reset, ban;
- struct amd_northbridge *nb = node_to_amd_nb(topology_die_id(cpu));
+ struct amd_northbridge *nb = node_to_amd_nb(topology_amd_node_id(cpu));
unsigned int reg;
int cuid;
--- a/arch/x86/kernel/cpu/cacheinfo.c
+++ b/arch/x86/kernel/cpu/cacheinfo.c
@@ -595,7 +595,7 @@ static void amd_init_l3_cache(struct _cp
if (index < 3)
return;
- node = topology_die_id(smp_processor_id());
+ node = topology_amd_node_id(smp_processor_id());
this_leaf->nb = node_to_amd_nb(node);
if (this_leaf->nb && !this_leaf->nb->l3_cache.indices)
amd_calc_l3_indices(this_leaf->nb);
--- a/arch/x86/kernel/cpu/mce/amd.c
+++ b/arch/x86/kernel/cpu/mce/amd.c
@@ -1181,7 +1181,7 @@ static int threshold_create_bank(struct
return -ENODEV;
if (is_shared_bank(bank)) {
- nb = node_to_amd_nb(topology_die_id(cpu));
+ nb = node_to_amd_nb(topology_amd_node_id(cpu));
/* threshold descriptor already initialized on this node? */
if (nb && nb->bank4) {
@@ -1285,7 +1285,7 @@ static void threshold_remove_bank(struct
* The last CPU on this node using the shared bank is going
* away, remove that bank now.
*/
- nb = node_to_amd_nb(topology_die_id(smp_processor_id()));
+ nb = node_to_amd_nb(topology_amd_node_id(smp_processor_id()));
nb->bank4 = NULL;
}
--- a/arch/x86/kernel/cpu/mce/inject.c
+++ b/arch/x86/kernel/cpu/mce/inject.c
@@ -543,8 +543,8 @@ static void do_inject(void)
if (boot_cpu_has(X86_FEATURE_AMD_DCM) &&
b == 4 &&
boot_cpu_data.x86 < 0x17) {
- toggle_nb_mca_mst_cpu(topology_die_id(cpu));
- cpu = get_nbc_for_node(topology_die_id(cpu));
+ toggle_nb_mca_mst_cpu(topology_amd_node_id(cpu));
+ cpu = get_nbc_for_node(topology_amd_node_id(cpu));
}
cpus_read_lock();
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -1907,7 +1907,7 @@ static void dct_determine_memory_type(st
/* On F10h and later ErrAddr is MC4_ADDR[47:1] */
static u64 get_error_address(struct amd64_pvt *pvt, struct mce *m)
{
- u16 mce_nid = topology_die_id(m->extcpu);
+ u16 mce_nid = topology_amd_node_id(m->extcpu);
struct mem_ctl_info *mci;
u8 start_bit = 1;
u8 end_bit = 47;
@@ -3438,7 +3438,7 @@ static void get_cpus_on_this_dct_cpumask
int cpu;
for_each_online_cpu(cpu)
- if (topology_die_id(cpu) == nid)
+ if (topology_amd_node_id(cpu) == nid)
cpumask_set_cpu(cpu, mask);
}
--- a/drivers/edac/mce_amd.c
+++ b/drivers/edac/mce_amd.c
@@ -1060,7 +1060,7 @@ static void decode_mc3_mce(struct mce *m
static void decode_mc4_mce(struct mce *m)
{
unsigned int fam = x86_family(m->cpuid);
- int node_id = topology_die_id(m->extcpu);
+ int node_id = topology_amd_node_id(m->extcpu);
u16 ec = EC(m->status);
u8 xec = XEC(m->status, 0x1f);
u8 offset = 0;
@@ -1188,7 +1188,7 @@ static void decode_smca_error(struct mce
if ((bank_type == SMCA_UMC || bank_type == SMCA_UMC_V2) &&
xec == 0 && decode_dram_ecc)
- decode_dram_ecc(topology_die_id(m->extcpu), m);
+ decode_dram_ecc(topology_amd_node_id(m->extcpu), m);
}
static inline void amd_decode_err_code(u16 ec)
next prev parent reply other threads:[~2023-07-24 17:46 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-24 17:43 [patch 00/29] x86/cpu: Rework the topology evaluation Thomas Gleixner
2023-07-24 17:43 ` [patch 01/29] x86/cpu: Encapsulate topology information in cpuinfo_x86 Thomas Gleixner
2023-07-25 7:46 ` Thomas Gleixner
2023-07-24 17:43 ` [patch 02/29] x86/cpu: Move phys_proc_id into topology info Thomas Gleixner
2023-07-24 17:43 ` [patch 03/29] x86/cpu: Move cpu_die_id " Thomas Gleixner
2023-07-24 17:43 ` [patch 04/29] scsi: lpfc: Use topology_core_id() Thomas Gleixner
2023-07-24 17:43 ` [patch 05/29] hwmon: (fam15h_power) " Thomas Gleixner
2023-07-24 17:53 ` Guenter Roeck
2023-07-24 17:43 ` [patch 06/29] x86/cpu: Move cpu_core_id into topology info Thomas Gleixner
2023-07-24 17:44 ` [patch 07/29] x86/cpu: Move cu_id " Thomas Gleixner
2023-07-24 17:44 ` [patch 08/29] x86/cpu: Remove pointless evaluation of x86_coreid_bits Thomas Gleixner
2023-07-24 17:44 ` [patch 09/29] x86/cpu: Move logical package and die IDs into topology info Thomas Gleixner
2023-07-24 17:44 ` [patch 10/29] x86/cpu: Move cpu_l[l2]c_id " Thomas Gleixner
2023-07-24 17:44 ` [patch 11/29] x86/cpu: Provide debug interface Thomas Gleixner
2023-07-24 17:44 ` [patch 12/29] x86/cpu: Provide cpuid_read() et al Thomas Gleixner
2023-07-24 17:44 ` [patch 13/29] x86/cpu: Provide cpu_init/parse_topology() Thomas Gleixner
2023-07-24 17:44 ` [patch 14/29] x86/cpu: Add legacy topology parser Thomas Gleixner
2023-07-24 17:44 ` [patch 15/29] x86/cpu: Use common topology code for Centaur and Zhaoxin Thomas Gleixner
2023-07-24 17:44 ` [patch 16/29] x86/cpu: Move __max_die_per_package to common.c Thomas Gleixner
2023-07-24 17:44 ` [patch 17/29] x86/cpu: Provide a sane leaf 0xb/0x1f parser Thomas Gleixner
2023-07-24 20:49 ` Peter Zijlstra
2023-07-24 21:02 ` Peter Zijlstra
2023-07-25 6:51 ` Thomas Gleixner
2023-07-24 17:44 ` [patch 18/29] x86/cpu: Use common topology code for Intel Thomas Gleixner
2023-07-24 17:44 ` Thomas Gleixner [this message]
2023-07-24 17:44 ` [patch 20/29] x86/cpu: Provide an AMD/HYGON specific topology parser Thomas Gleixner
2023-07-24 17:44 ` [patch 21/29] x86/smpboot: Teach it about topo.amd_node_id Thomas Gleixner
2023-07-24 17:44 ` [patch 22/29] x86/cpu: Use common topology code for AMD Thomas Gleixner
2023-07-24 17:44 ` [patch 23/29] x86/cpu: Use common topology code for HYGON Thomas Gleixner
2023-07-24 17:44 ` [patch 24/29] x86/mm/numa: Use core domain size on AMD Thomas Gleixner
2023-07-24 17:44 ` [patch 25/29] x86/cpu: Make topology_amd_node_id() use the actual node info Thomas Gleixner
2023-07-24 17:44 ` [patch 26/29] x86/cpu: Remove topology.c Thomas Gleixner
2023-07-24 17:44 ` [patch 27/29] x86/cpu: Remove x86_coreid_bits Thomas Gleixner
2023-07-24 17:44 ` [patch 28/29] x86/apic: Remove unused phys_pkg_id() callback Thomas Gleixner
2023-07-24 17:44 ` [patch 29/29] x86/apic/uv: Remove the private leaf 0xb parser Thomas Gleixner
2023-07-24 21:05 ` [patch 00/29] x86/cpu: Rework the topology evaluation Peter Zijlstra
2023-07-25 20:17 ` Dimitri Sivanich
2023-07-26 22:15 ` Sohil Mehta
2023-07-26 22:38 ` Thomas Gleixner
2023-07-26 23:27 ` Sohil Mehta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230724172844.804554934@linutronix.de \
--to=tglx@linutronix.de \
--cc=andrew.cooper3@citrix.com \
--cc=arjan@linux.intel.com \
--cc=dick.kennedy@broadcom.com \
--cc=dimitri.sivanich@hpe.com \
--cc=james.smart@broadcom.com \
--cc=jdelvare@suse.com \
--cc=jejb@linux.ibm.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=martin.petersen@oracle.com \
--cc=mike.travis@hpe.com \
--cc=ray.huang@amd.com \
--cc=russ.anderson@hpe.com \
--cc=steve.wahl@hpe.com \
--cc=thomas.lendacky@amd.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox