[PATCH 01/10] scsi: pm8001: Setup IRQs on resume

[Damien Le Moal <dlemoal@kernel.org>]

The function pm8001_pci_resume() only calls pm8001_request_irq() without
calling pm8001_setup_irq(). This causes the IRQ allocation to fail,
whihc leads all drives being removed from the system.

Fix this issue by integrating the code for pm8001_setup_irq() directly
inside pm8001_request_irq() so that msix setup is performed both during
normal initialization and resume operations.

Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
---
 drivers/scsi/pm8001/pm8001_init.c | 51 +++++++++++--------------------
 1 file changed, 17 insertions(+), 34 deletions(-)

diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 5e5ce1e74c3b..443a3176c6c0 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -273,7 +273,6 @@ static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id)
 	return ret;
 }
 
-static u32 pm8001_setup_irq(struct pm8001_hba_info *pm8001_ha);
 static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha);
 
 /**
@@ -294,13 +293,6 @@ static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
 	pm8001_dbg(pm8001_ha, INIT, "pm8001_alloc: PHY:%x\n",
 		   pm8001_ha->chip->n_phy);
 
-	/* Setup Interrupt */
-	rc = pm8001_setup_irq(pm8001_ha);
-	if (rc) {
-		pm8001_dbg(pm8001_ha, FAIL,
-			   "pm8001_setup_irq failed [ret: %d]\n", rc);
-		goto err_out;
-	}
 	/* Request Interrupt */
 	rc = pm8001_request_irq(pm8001_ha);
 	if (rc)
@@ -1031,47 +1023,38 @@ static u32 pm8001_request_msix(struct pm8001_hba_info *pm8001_ha)
 }
 #endif
 
-static u32 pm8001_setup_irq(struct pm8001_hba_info *pm8001_ha)
-{
-	struct pci_dev *pdev;
-
-	pdev = pm8001_ha->pdev;
-
-#ifdef PM8001_USE_MSIX
-	if (pci_find_capability(pdev, PCI_CAP_ID_MSIX))
-		return pm8001_setup_msix(pm8001_ha);
-	pm8001_dbg(pm8001_ha, INIT, "MSIX not supported!!!\n");
-#endif
-	return 0;
-}
-
 /**
  * pm8001_request_irq - register interrupt
  * @pm8001_ha: our ha struct.
  */
 static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
 {
-	struct pci_dev *pdev;
+	struct pci_dev *pdev = pm8001_ha->pdev;
+#ifdef PM8001_USE_MSIX
 	int rc;
 
-	pdev = pm8001_ha->pdev;
+	if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) {
+		rc = pm8001_setup_msix(pm8001_ha);
+		if (rc) {
+			pm8001_dbg(pm8001_ha, FAIL,
+				   "pm8001_setup_irq failed [ret: %d]\n", rc);
+			return rc;
+		}
 
-#ifdef PM8001_USE_MSIX
-	if (pdev->msix_cap && pci_msi_enabled())
-		return pm8001_request_msix(pm8001_ha);
-	else {
-		pm8001_dbg(pm8001_ha, INIT, "MSIX not supported!!!\n");
-		goto intx;
+		if (pdev->msix_cap && pci_msi_enabled())
+			return pm8001_request_msix(pm8001_ha);
 	}
+
+	pm8001_dbg(pm8001_ha, INIT, "MSIX not supported!!!\n");
 #endif
 
-intx:
 	/* initialize the INT-X interrupt */
 	pm8001_ha->irq_vector[0].irq_id = 0;
 	pm8001_ha->irq_vector[0].drv_inst = pm8001_ha;
-	rc = request_irq(pdev->irq, pm8001_interrupt_handler_intx, IRQF_SHARED,
-		pm8001_ha->name, SHOST_TO_SAS_HA(pm8001_ha->shost));
-	return rc;
+
+	return request_irq(pdev->irq, pm8001_interrupt_handler_intx,
+			   IRQF_SHARED, pm8001_ha->name,
+			   SHOST_TO_SAS_HA(pm8001_ha->shost));
 }
 
 /**
-- 
2.41.0