From: Damien Le Moal <dlemoal@kernel.org>
To: linux-ide@vger.kernel.org
Cc: linux-scsi@vger.kernel.org,
"Martin K . Petersen" <martin.petersen@oracle.com>,
John Garry <john.g.garry@oracle.com>,
Rodrigo Vivi <rodrigo.vivi@intel.com>,
Paul Ausbeck <paula@soe.ucsc.edu>,
Kai-Heng Feng <kai.heng.feng@canonical.com>,
Joe Breuer <linux-kernel@jmbreuer.net>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Chia-Lin Kao <acelan.kao@canonical.com>
Subject: [PATCH v6 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
Date: Sat, 23 Sep 2023 09:29:18 +0900 [thread overview]
Message-ID: <20230923002932.1082348-10-dlemoal@kernel.org> (raw)
In-Reply-To: <20230923002932.1082348-1-dlemoal@kernel.org>
If an error occurs when resuming a host adapter before the devices
attached to the adapter are resumed, the adapter low level driver may
remove the scsi host, resulting in a call to sd_remove() for the
disks of the host. This in turn results in a call to sd_shutdown() which
will issue a synchronize cache command and a start stop unit command to
spindown the disk. sd_shutdown() issues the commands only if the device
is not already runtime suspended but does not check the power state for
system-wide suspend/resume. That is, the commands may be issued with the
device in a suspended state, which causes PM resume to hang, forcing a
reset of the machine to recover.
Fix this by tracking the suspended state of a disk using the sicsi_disk
suspended flag and by not calling sd_shutdown() in sd_remove() if the
disk is not running.
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
---
drivers/scsi/sd.c | 17 +++++++++++++----
drivers/scsi/sd.h | 1 +
2 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index a1ef4eef904f..bff8663be7e0 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -3741,7 +3741,8 @@ static int sd_remove(struct device *dev)
device_del(&sdkp->disk_dev);
del_gendisk(sdkp->disk);
- sd_shutdown(dev);
+ if (!sdkp->suspended)
+ sd_shutdown(dev);
put_disk(sdkp->disk);
return 0;
@@ -3872,6 +3873,9 @@ static int sd_suspend_common(struct device *dev, bool runtime)
ret = 0;
}
+ if (!ret)
+ sdkp->suspended = 1;
+
return ret;
}
@@ -3891,21 +3895,26 @@ static int sd_suspend_runtime(struct device *dev)
static int sd_resume(struct device *dev, bool runtime)
{
struct scsi_disk *sdkp = dev_get_drvdata(dev);
- int ret;
+ int ret = 0;
if (!sdkp) /* E.g.: runtime resume at the start of sd_probe() */
return 0;
- if (!sd_do_start_stop(sdkp->device, runtime))
+ if (!sd_do_start_stop(sdkp->device, runtime)) {
+ sdkp->suspended = 0;
return 0;
+ }
if (!sdkp->device->no_start_on_resume) {
sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
ret = sd_start_stop_device(sdkp, 1);
}
- if (!ret)
+ if (!ret) {
opal_unlock_from_suspend(sdkp->opal_dev);
+ sdkp->suspended = 0;
+ }
+
return ret;
}
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 5eea762f84d1..4d42392fae07 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -150,6 +150,7 @@ struct scsi_disk {
unsigned urswrz : 1;
unsigned security : 1;
unsigned ignore_medium_access_errors : 1;
+ unsigned suspended : 1;
};
#define to_scsi_disk(obj) container_of(obj, struct scsi_disk, disk_dev)
--
2.41.0
next prev parent reply other threads:[~2023-09-23 0:29 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-23 0:29 [PATCH v6 00/23] Fix libata suspend/resume handling and code cleanup Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 01/23] ata: libata-core: Fix ata_port_request_pm() locking Damien Le Moal
2023-09-26 17:18 ` Bart Van Assche
2023-09-23 0:29 ` [PATCH v6 02/23] ata: libata-core: Fix port and device removal Damien Le Moal
2023-09-26 17:28 ` Bart Van Assche
2023-09-23 0:29 ` [PATCH v6 03/23] ata: libata-scsi: link ata port and scsi device Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 04/23] scsi: sd: Differentiate system and runtime start/stop management Damien Le Moal
2023-09-26 18:07 ` Bart Van Assche
2023-09-23 0:29 ` [PATCH v6 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop Damien Le Moal
2023-09-25 14:27 ` Phillip Susi
2023-09-26 6:19 ` Damien Le Moal
2023-09-26 6:34 ` Damien Le Moal
2023-09-26 15:25 ` Phillip Susi
2023-09-23 0:29 ` [PATCH v6 06/23] scsi: Do not attempt to rescan suspended devices Damien Le Moal
2023-09-26 18:10 ` Bart Van Assche
2023-09-23 0:29 ` [PATCH v6 07/23] ata: libata-scsi: Fix delayed scsi_rescan_device() execution Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 08/23] ata: libata-core: Do not register PM operations for SAS ports Damien Le Moal
2023-09-23 0:29 ` Damien Le Moal [this message]
2023-09-25 20:22 ` [PATCH v6 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown Bart Van Assche
2023-09-26 6:00 ` Damien Le Moal
2023-09-26 14:51 ` Bart Van Assche
2023-09-26 23:30 ` Bart Van Assche
2023-09-23 0:29 ` [PATCH v6 10/23] ata: libata-core: Fix compilation warning in ata_dev_config_ncq() Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 11/23] ata: libata-eh: Fix compilation warning in ata_eh_link_report() Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 12/23] scsi: Remove scsi device no_start_on_resume flag Damien Le Moal
2023-09-26 20:42 ` Bart Van Assche
2023-09-23 0:29 ` [PATCH v6 13/23] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat() Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 14/23] ata: libata-core: Synchronize ata_port_detach() with hotplug Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 15/23] ata: libata-core: Detach a port devices on shutdown Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 16/23] ata: libata-core: Remove ata_port_suspend_async() Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 17/23] ata: libata-core: Remove ata_port_resume_async() Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 18/23] ata: libata-core: Do not poweroff runtime suspended ports Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 19/23] ata: libata-core: Do not resume " Damien Le Moal
2023-09-25 17:26 ` Phillip Susi
2023-09-26 6:27 ` Damien Le Moal
2023-09-26 15:01 ` Phillip Susi
2023-09-23 0:29 ` [PATCH v6 20/23] ata: libata-sata: Improve ata_sas_slave_configure() Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 21/23] ata: libata-eh: Improve reset error messages Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 22/23] ata: libata-eh: Reduce "disable device" message verbosity Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 23/23] ata: libata: Cleanup inline DMA helper functions Damien Le Moal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230923002932.1082348-10-dlemoal@kernel.org \
--to=dlemoal@kernel.org \
--cc=acelan.kao@canonical.com \
--cc=geert@linux-m68k.org \
--cc=john.g.garry@oracle.com \
--cc=kai.heng.feng@canonical.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@jmbreuer.net \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=paula@soe.ucsc.edu \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).