From: Damien Le Moal <dlemoal@kernel.org>
To: linux-ide@vger.kernel.org
Cc: linux-scsi@vger.kernel.org,
"Martin K . Petersen" <martin.petersen@oracle.com>,
John Garry <john.g.garry@oracle.com>,
Rodrigo Vivi <rodrigo.vivi@intel.com>,
Paul Ausbeck <paula@soe.ucsc.edu>,
Kai-Heng Feng <kai.heng.feng@canonical.com>,
Joe Breuer <linux-kernel@jmbreuer.net>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Chia-Lin Kao <acelan.kao@canonical.com>
Subject: [PATCH v6 10/23] ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
Date: Sat, 23 Sep 2023 09:29:19 +0900 [thread overview]
Message-ID: <20230923002932.1082348-11-dlemoal@kernel.org> (raw)
In-Reply-To: <20230923002932.1082348-1-dlemoal@kernel.org>
The 24 bytes length allocated to the ncq_desc string in
ata_dev_config_lba() for ata_dev_config_ncq() to use is too short,
causing the following gcc compilation warnings when compiling with W=1:
drivers/ata/libata-core.c: In function ‘ata_dev_configure’:
drivers/ata/libata-core.c:2378:56: warning: ‘%d’ directive output may be truncated writing between 1 and 2 bytes into a region of size between 1 and 11 [-Wformat-truncation=]
2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
| ^~
In function ‘ata_dev_config_ncq’,
inlined from ‘ata_dev_config_lba’ at drivers/ata/libata-core.c:2649:8,
inlined from ‘ata_dev_configure’ at drivers/ata/libata-core.c:2952:9:
drivers/ata/libata-core.c:2378:41: note: directive argument in the range [1, 32]
2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
| ^~~~~~~~~~~~~~~~~~~~~
drivers/ata/libata-core.c:2378:17: note: ‘snprintf’ output between 16 and 31 bytes into a destination of size 24
2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2379 | ddepth, aa_desc);
| ~~~~~~~~~~~~~~~~
Avoid these warnings and the potential truncation by changing the size
of the ncq_desc string to 32 characters.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
drivers/ata/libata-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 261445c1851b..d8cc1e27a125 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2619,7 +2619,7 @@ static int ata_dev_config_lba(struct ata_device *dev)
{
const u16 *id = dev->id;
const char *lba_desc;
- char ncq_desc[24];
+ char ncq_desc[32];
int ret;
dev->flags |= ATA_DFLAG_LBA;
--
2.41.0
next prev parent reply other threads:[~2023-09-23 0:29 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-23 0:29 [PATCH v6 00/23] Fix libata suspend/resume handling and code cleanup Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 01/23] ata: libata-core: Fix ata_port_request_pm() locking Damien Le Moal
2023-09-26 17:18 ` Bart Van Assche
2023-09-23 0:29 ` [PATCH v6 02/23] ata: libata-core: Fix port and device removal Damien Le Moal
2023-09-26 17:28 ` Bart Van Assche
2023-09-23 0:29 ` [PATCH v6 03/23] ata: libata-scsi: link ata port and scsi device Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 04/23] scsi: sd: Differentiate system and runtime start/stop management Damien Le Moal
2023-09-26 18:07 ` Bart Van Assche
2023-09-23 0:29 ` [PATCH v6 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop Damien Le Moal
2023-09-25 14:27 ` Phillip Susi
2023-09-26 6:19 ` Damien Le Moal
2023-09-26 6:34 ` Damien Le Moal
2023-09-26 15:25 ` Phillip Susi
2023-09-23 0:29 ` [PATCH v6 06/23] scsi: Do not attempt to rescan suspended devices Damien Le Moal
2023-09-26 18:10 ` Bart Van Assche
2023-09-23 0:29 ` [PATCH v6 07/23] ata: libata-scsi: Fix delayed scsi_rescan_device() execution Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 08/23] ata: libata-core: Do not register PM operations for SAS ports Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown Damien Le Moal
2023-09-25 20:22 ` Bart Van Assche
2023-09-26 6:00 ` Damien Le Moal
2023-09-26 14:51 ` Bart Van Assche
2023-09-26 23:30 ` Bart Van Assche
2023-09-23 0:29 ` Damien Le Moal [this message]
2023-09-23 0:29 ` [PATCH v6 11/23] ata: libata-eh: Fix compilation warning in ata_eh_link_report() Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 12/23] scsi: Remove scsi device no_start_on_resume flag Damien Le Moal
2023-09-26 20:42 ` Bart Van Assche
2023-09-23 0:29 ` [PATCH v6 13/23] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat() Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 14/23] ata: libata-core: Synchronize ata_port_detach() with hotplug Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 15/23] ata: libata-core: Detach a port devices on shutdown Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 16/23] ata: libata-core: Remove ata_port_suspend_async() Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 17/23] ata: libata-core: Remove ata_port_resume_async() Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 18/23] ata: libata-core: Do not poweroff runtime suspended ports Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 19/23] ata: libata-core: Do not resume " Damien Le Moal
2023-09-25 17:26 ` Phillip Susi
2023-09-26 6:27 ` Damien Le Moal
2023-09-26 15:01 ` Phillip Susi
2023-09-23 0:29 ` [PATCH v6 20/23] ata: libata-sata: Improve ata_sas_slave_configure() Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 21/23] ata: libata-eh: Improve reset error messages Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 22/23] ata: libata-eh: Reduce "disable device" message verbosity Damien Le Moal
2023-09-23 0:29 ` [PATCH v6 23/23] ata: libata: Cleanup inline DMA helper functions Damien Le Moal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230923002932.1082348-11-dlemoal@kernel.org \
--to=dlemoal@kernel.org \
--cc=acelan.kao@canonical.com \
--cc=geert@linux-m68k.org \
--cc=john.g.garry@oracle.com \
--cc=kai.heng.feng@canonical.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@jmbreuer.net \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=paula@soe.ucsc.edu \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).