From: Karan Tilak Kumar <kartilak@cisco.com>
To: sebaddel@cisco.com
Cc: arulponn@cisco.com, djhawar@cisco.com, gcboffa@cisco.com,
mkai2@cisco.com, satishkh@cisco.com, jejb@linux.ibm.com,
martin.petersen@oracle.com, linux-scsi@vger.kernel.org,
linux-kernel@vger.kernel.org,
Karan Tilak Kumar <kartilak@cisco.com>
Subject: [PATCH v4 02/13] scsi: fnic: Add and use fnic number
Date: Wed, 29 Nov 2023 18:33:51 -0800 [thread overview]
Message-ID: <20231130023402.802282-3-kartilak@cisco.com> (raw)
In-Reply-To: <20231130023402.802282-1-kartilak@cisco.com>
Add fnic_num in fnic.h to identify fnic in a multi-fnic environment.
Increment and set the fnic number during driver load in fnic_probe.
Replace the host number with fnic number in debugfs.
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Changes between v3 and v4:
Incorporate review comments from Martin and Hannes:
Undo the change to replace host number with fnic
number in debugfs since kernel stack uses host number.
Use ida_alloc to allocate ID for fnic number.
---
drivers/scsi/fnic/fnic.h | 1 +
drivers/scsi/fnic/fnic_main.c | 18 ++++++++++++++++--
2 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h
index 93c68931a593..c6c549c633b1 100644
--- a/drivers/scsi/fnic/fnic.h
+++ b/drivers/scsi/fnic/fnic.h
@@ -216,6 +216,7 @@ struct fnic_event {
/* Per-instance private data structure */
struct fnic {
+ int fnic_num;
struct fc_lport *lport;
struct fcoe_ctlr ctlr; /* FIP FCoE controller structure */
struct vnic_dev_bar bar0;
diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
index 984bc5fc55e2..f989a5d7a229 100644
--- a/drivers/scsi/fnic/fnic_main.c
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -39,6 +39,7 @@ static struct kmem_cache *fnic_sgl_cache[FNIC_SGL_NUM_CACHES];
static struct kmem_cache *fnic_io_req_cache;
static LIST_HEAD(fnic_list);
static DEFINE_SPINLOCK(fnic_list_lock);
+static DEFINE_IDA(fnic_ida);
/* Supported devices by fnic module */
static struct pci_device_id fnic_id_table[] = {
@@ -583,7 +584,8 @@ static int fnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
struct fc_lport *lp;
struct fnic *fnic;
mempool_t *pool;
- int err;
+ int err = 0;
+ int fnic_id = 0;
int i;
unsigned long flags;
@@ -597,8 +599,16 @@ static int fnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
err = -ENOMEM;
goto err_out;
}
+
host = lp->host;
fnic = lport_priv(lp);
+
+ fnic_id = ida_alloc(&fnic_ida, GFP_KERNEL);
+ if (fnic_id < 0) {
+ pr_err("Unable to alloc fnic ID\n");
+ err = fnic_id;
+ goto err_out_ida_alloc;
+ }
fnic->lport = lp;
fnic->ctlr.lp = lp;
@@ -608,7 +618,7 @@ static int fnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
host->host_no);
host->transportt = fnic_fc_transport;
-
+ fnic->fnic_num = fnic_id;
fnic_stats_debugfs_init(fnic);
/* Setup PCI resources */
@@ -949,6 +959,8 @@ static int fnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_disable_device(pdev);
err_out_free_hba:
fnic_stats_debugfs_remove(fnic);
+ ida_free(&fnic_ida, fnic->fnic_num);
+err_out_ida_alloc:
scsi_host_put(lp->host);
err_out:
return err;
@@ -1029,6 +1041,7 @@ static void fnic_remove(struct pci_dev *pdev)
fnic_iounmap(fnic);
pci_release_regions(pdev);
pci_disable_device(pdev);
+ ida_free(&fnic_ida, fnic->fnic_num);
scsi_host_put(lp->host);
}
@@ -1166,6 +1179,7 @@ static void __exit fnic_cleanup_module(void)
fnic_trace_free();
fnic_fc_trace_free();
fnic_debugfs_terminate();
+ ida_destroy(&fnic_ida);
}
module_init(fnic_init_module);
--
2.31.1
next prev parent reply other threads:[~2023-11-30 2:34 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-30 2:33 [PATCH v4 00/13] Introduce support for multiqueue (MQ) in fnic Karan Tilak Kumar
2023-11-30 2:33 ` [PATCH v4 01/13] scsi: fnic: Modify definitions to sync with VIC firmware Karan Tilak Kumar
2023-11-30 2:33 ` Karan Tilak Kumar [this message]
2023-11-30 2:33 ` [PATCH v4 03/13] scsi: fnic: Add and improve log messages Karan Tilak Kumar
2023-11-30 2:33 ` [PATCH v4 04/13] scsi: fnic: Rename wq_copy to hw_copy_wq Karan Tilak Kumar
2023-11-30 2:33 ` [PATCH v4 05/13] scsi: fnic: Get copy workqueue count and interrupt mode from config Karan Tilak Kumar
2023-11-30 2:33 ` [PATCH v4 06/13] scsi: fnic: Refactor and redefine fnic.h for multiqueue Karan Tilak Kumar
2023-11-30 2:33 ` [PATCH v4 07/13] scsi: fnic: Modify ISRs to support multiqueue(MQ) Karan Tilak Kumar
2023-11-30 2:33 ` [PATCH v4 08/13] scsi: fnic: Define stats to track multiqueue (MQ) IOs Karan Tilak Kumar
2023-11-30 2:33 ` [PATCH v4 09/13] scsi: fnic: Remove usage of host_lock Karan Tilak Kumar
2023-11-30 2:33 ` [PATCH v4 10/13] scsi: fnic: Add support for multiqueue (MQ) in fnic_main.c Karan Tilak Kumar
2023-11-30 2:34 ` [PATCH v4 11/13] scsi: fnic: Add support for multiqueue (MQ) in fnic driver Karan Tilak Kumar
2023-11-30 2:34 ` [PATCH v4 12/13] scsi: fnic: Improve logs and add support for multiqueue (MQ) Karan Tilak Kumar
2023-11-30 2:34 ` [PATCH v4 13/13] scsi: fnic: Increment driver version Karan Tilak Kumar
2023-12-06 3:10 ` [PATCH v4 00/13] Introduce support for multiqueue (MQ) in fnic Martin K. Petersen
2023-12-06 3:53 ` Karan Tilak Kumar (kartilak)
2023-12-08 18:03 ` Martin K. Petersen
2023-12-08 19:20 ` Karan Tilak Kumar (kartilak)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231130023402.802282-3-kartilak@cisco.com \
--to=kartilak@cisco.com \
--cc=arulponn@cisco.com \
--cc=djhawar@cisco.com \
--cc=gcboffa@cisco.com \
--cc=jejb@linux.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=mkai2@cisco.com \
--cc=satishkh@cisco.com \
--cc=sebaddel@cisco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox