From: Don Brace <don.brace@microchip.com>
To: <don.brace@microchip.com>, <Kevin.Barnett@microchip.com>,
<scott.teel@microchip.com>, <Justin.Lindley@microchip.com>,
<scott.benesh@microchip.com>, <gerry.morong@microchip.com>,
<mahesh.rajashekhara@microchip.com>, <mike.mcgowen@microchip.com>,
<murthy.bhat@microchip.com>, <kumar.meiyappan@microchip.com>,
<jeremy.reeves@microchip.com>, <david.strahan@microchip.com>,
<hch@infradead.org>, <jejb@linux.vnet.ibm.com>,
<joseph.szczypek@hpe.com>, <POSWALD@suse.com>
Cc: <linux-scsi@vger.kernel.org>
Subject: [PATCH 1/3] smartpqi: Add new controller PCI IDs
Date: Tue, 19 Dec 2023 13:36:50 -0600 [thread overview]
Message-ID: <20231219193653.277553-2-don.brace@microchip.com> (raw)
In-Reply-To: <20231219193653.277553-1-don.brace@microchip.com>
From: David Strahan <david.strahan@microchip.com>
All PCI ID entries in Hex.
Add PCI IDs for Cisco controllers:
VID / DID / SVID / SDID
---- ---- ---- ----
Cisco 24G TriMode M1 RAID 4GB FBWC 32D 9005 / 028f / 1137 / 02f8
Cisco 24G TriMode M1 RAID 4GB FBWC 16D 9005 / 028f / 1137 / 02f9
Cisco 24G TriMode M1 HBA 16D 9005 / 028f / 1137 / 02fa
Add PCI IDs for CloudNine controllers:
VID / DID / SVID / SDID
---- ---- ---- ----
SmartRAID P7604N-16i 9005 / 028f / 1f51 / 100e
SmartRAID P7604N-8i 9005 / 028f / 1f51 / 100f
SmartRAID P7504N-16i 9005 / 028f / 1f51 / 1010
SmartRAID P7504N-8i 9005 / 028f / 1f51 / 1011
SmartRAID P7504N-8i 9005 / 028f / 1f51 / 1043
SmartHBA P6500-8i 9005 / 028f / 1f51 / 1044
SmartRAID P7504-8i 9005 / 028f / 1f51 / 1045
Reviewed-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: David Strahan <david.strahan@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
---
drivers/scsi/smartpqi/smartpqi_init.c | 40 +++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 9a58df9312fa..d56201120087 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -10142,6 +10142,18 @@ static const struct pci_device_id pqi_pci_id_table[] = {
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
0x1014, 0x0718)
},
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1137, 0x02f8)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1137, 0x02f9)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1137, 0x02fa)
+ },
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
0x1e93, 0x1000)
@@ -10198,6 +10210,34 @@ static const struct pci_device_id pqi_pci_id_table[] = {
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
0x1f51, 0x100a)
},
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1f51, 0x100e)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1f51, 0x100f)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1f51, 0x1010)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1f51, 0x1011)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1f51, 0x1043)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1f51, 0x1044)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ 0x1f51, 0x1045)
+ },
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
PCI_ANY_ID, PCI_ANY_ID)
--
2.43.0.76.g1a87c842ec
next prev parent reply other threads:[~2023-12-19 19:37 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-19 19:36 [PATCH 0/3] smartpqi updates Don Brace
2023-12-19 19:36 ` Don Brace [this message]
2023-12-19 19:36 ` [PATCH 2/3] smartpqi: fix logical volume rescan race condition Don Brace
2023-12-19 19:36 ` [PATCH 3/3] smartpqi: bump driver version to 2.1.26-030 Don Brace
2024-01-04 4:11 ` [PATCH 0/3] smartpqi updates Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231219193653.277553-2-don.brace@microchip.com \
--to=don.brace@microchip.com \
--cc=Justin.Lindley@microchip.com \
--cc=Kevin.Barnett@microchip.com \
--cc=POSWALD@suse.com \
--cc=david.strahan@microchip.com \
--cc=gerry.morong@microchip.com \
--cc=hch@infradead.org \
--cc=jejb@linux.vnet.ibm.com \
--cc=jeremy.reeves@microchip.com \
--cc=joseph.szczypek@hpe.com \
--cc=kumar.meiyappan@microchip.com \
--cc=linux-scsi@vger.kernel.org \
--cc=mahesh.rajashekhara@microchip.com \
--cc=mike.mcgowen@microchip.com \
--cc=murthy.bhat@microchip.com \
--cc=scott.benesh@microchip.com \
--cc=scott.teel@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox