From: Ranjan Kumar <ranjan.kumar@broadcom.com>
To: linux-scsi@vger.kernel.org, martin.petersen@oracle.com
Cc: rajsekhar.chundru@broadcom.com, sathya.prakash@broadcom.com,
sumit.saxena@broadcom.com, chandrakanth.patil@broadcom.com,
prayas.patel@broadcom.com,
Ranjan Kumar <ranjan.kumar@broadcom.com>
Subject: [PATCH v2 6/7] mpi3mr: Update MPI Headers to revision 31
Date: Thu, 7 Mar 2024 20:38:24 +0530 [thread overview]
Message-ID: <20240307150825.7613-7-ranjan.kumar@broadcom.com> (raw)
In-Reply-To: <20240307150825.7613-1-ranjan.kumar@broadcom.com>
[-- Attachment #1: Type: text/plain, Size: 8642 bytes --]
Update MPI Headers to revision 31
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
---
drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h | 3 +++
drivers/scsi/mpi3mr/mpi/mpi30_image.h | 20 +++++---------------
drivers/scsi/mpi3mr/mpi/mpi30_ioc.h | 18 +++++++++++-------
drivers/scsi/mpi3mr/mpi/mpi30_transport.h | 2 +-
drivers/scsi/mpi3mr/mpi3mr_fw.c | 8 ++++----
5 files changed, 24 insertions(+), 27 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h b/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h
index 35f81af40f51..6a19e17eb1a7 100644
--- a/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h
@@ -309,6 +309,7 @@ struct mpi3_man6_gpio_entry {
#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_GENERIC (0x00)
#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_CABLE_MGMT (0x10)
#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_ACTIVE_CABLE_OVERCURRENT (0x20)
+#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_ACK_REQUIRED (0x02)
#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_MASK (0x01)
#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_EDGE (0x00)
#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_LEVEL (0x01)
@@ -1315,6 +1316,8 @@ struct mpi3_driver_page0 {
__le32 reserved18;
};
#define MPI3_DRIVER0_PAGEVERSION (0x00)
+#define MPI3_DRIVER0_BSDOPTS_DEVICEEXPOSURE_DISABLE (0x00000020)
+#define MPI3_DRIVER0_BSDOPTS_WRITECACHE_DISABLE (0x00000010)
#define MPI3_DRIVER0_BSDOPTS_HEADLESS_MODE_ENABLE (0x00000008)
#define MPI3_DRIVER0_BSDOPTS_DIS_HII_CONFIG_UTIL (0x00000004)
#define MPI3_DRIVER0_BSDOPTS_REGISTRATION_MASK (0x00000003)
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_image.h b/drivers/scsi/mpi3mr/mpi/mpi30_image.h
index 47035b811902..7df242190135 100644
--- a/drivers/scsi/mpi3mr/mpi/mpi30_image.h
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_image.h
@@ -198,16 +198,17 @@ struct mpi3_supported_devices_data {
struct mpi3_supported_device supported_device[MPI3_SUPPORTED_DEVICE_MAX];
};
-#ifndef MPI3_ENCRYPTED_HASH_MAX
-#define MPI3_ENCRYPTED_HASH_MAX (1)
+#ifndef MPI3_PUBLIC_KEY_MAX
+#define MPI3_PUBLIC_KEY_MAX (1)
#endif
struct mpi3_encrypted_hash_entry {
u8 hash_image_type;
u8 hash_algorithm;
u8 encryption_algorithm;
u8 reserved03;
- __le32 reserved04;
- __le32 encrypted_hash[MPI3_ENCRYPTED_HASH_MAX];
+ __le16 public_key_size;
+ __le16 signature_size;
+ __le32 public_key[MPI3_PUBLIC_KEY_MAX];
};
#define MPI3_HASH_IMAGE_TYPE_KEY_WITH_SIGNATURE (0x03)
@@ -228,17 +229,6 @@ struct mpi3_encrypted_hash_entry {
#define MPI3_ENCRYPTION_ALGORITHM_RSA2048 (0x04)
#define MPI3_ENCRYPTION_ALGORITHM_RSA4096 (0x05)
#define MPI3_ENCRYPTION_ALGORITHM_RSA3072 (0x06)
-#ifndef MPI3_PUBLIC_KEY_MAX
-#define MPI3_PUBLIC_KEY_MAX (1)
-#endif
-struct mpi3_encrypted_key_with_hash_entry {
- u8 hash_image_type;
- u8 hash_algorithm;
- u8 encryption_algorithm;
- u8 reserved03;
- __le32 reserved04;
- __le32 public_key[MPI3_PUBLIC_KEY_MAX];
-};
#ifndef MPI3_ENCRYPTED_HASH_ENTRY_MAX
#define MPI3_ENCRYPTED_HASH_ENTRY_MAX (1)
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h b/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h
index 85b91583bacf..028784949873 100644
--- a/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h
@@ -101,6 +101,8 @@ struct mpi3_ioc_facts_data {
__le16 max_io_throttle_group;
__le16 io_throttle_low;
__le16 io_throttle_high;
+ __le32 diag_fdl_size;
+ __le32 diag_tty_size;
};
#define MPI3_IOCFACTS_CAPABILITY_NON_SUPERVISOR_MASK (0x80000000)
#define MPI3_IOCFACTS_CAPABILITY_SUPERVISOR_IOC (0x00000000)
@@ -108,13 +110,13 @@ struct mpi3_ioc_facts_data {
#define MPI3_IOCFACTS_CAPABILITY_INT_COALESCE_MASK (0x00000600)
#define MPI3_IOCFACTS_CAPABILITY_INT_COALESCE_FIXED_THRESHOLD (0x00000000)
#define MPI3_IOCFACTS_CAPABILITY_INT_COALESCE_OUTSTANDING_IO (0x00000200)
-#define MPI3_IOCFACTS_CAPABILITY_COMPLETE_RESET_CAPABLE (0x00000100)
-#define MPI3_IOCFACTS_CAPABILITY_SEG_DIAG_TRACE_ENABLED (0x00000080)
-#define MPI3_IOCFACTS_CAPABILITY_SEG_DIAG_FW_ENABLED (0x00000040)
-#define MPI3_IOCFACTS_CAPABILITY_SEG_DIAG_DRIVER_ENABLED (0x00000020)
-#define MPI3_IOCFACTS_CAPABILITY_ADVANCED_HOST_PD_ENABLED (0x00000010)
-#define MPI3_IOCFACTS_CAPABILITY_RAID_CAPABLE (0x00000008)
-#define MPI3_IOCFACTS_CAPABILITY_MULTIPATH_ENABLED (0x00000002)
+#define MPI3_IOCFACTS_CAPABILITY_COMPLETE_RESET_SUPPORTED (0x00000100)
+#define MPI3_IOCFACTS_CAPABILITY_SEG_DIAG_TRACE_SUPPORTED (0x00000080)
+#define MPI3_IOCFACTS_CAPABILITY_SEG_DIAG_FW_SUPPORTED (0x00000040)
+#define MPI3_IOCFACTS_CAPABILITY_SEG_DIAG_DRIVER_SUPPORTED (0x00000020)
+#define MPI3_IOCFACTS_CAPABILITY_ADVANCED_HOST_PD_SUPPORTED (0x00000010)
+#define MPI3_IOCFACTS_CAPABILITY_RAID_SUPPORTED (0x00000008)
+#define MPI3_IOCFACTS_CAPABILITY_MULTIPATH_SUPPORTED (0x00000002)
#define MPI3_IOCFACTS_CAPABILITY_COALESCE_CTRL_SUPPORTED (0x00000001)
#define MPI3_IOCFACTS_PID_TYPE_MASK (0xf000)
#define MPI3_IOCFACTS_PID_TYPE_SHIFT (12)
@@ -159,6 +161,8 @@ struct mpi3_ioc_facts_data {
#define MPI3_IOCFACTS_FLAGS_PERSONALITY_RAID_DDR (0x00000002)
#define MPI3_IOCFACTS_IO_THROTTLE_DATA_LENGTH_NOT_REQUIRED (0x0000)
#define MPI3_IOCFACTS_MAX_IO_THROTTLE_GROUP_NOT_REQUIRED (0x0000)
+#define MPI3_IOCFACTS_DIAGFDLSIZE_NOT_SUPPORTED (0x00000000)
+#define MPI3_IOCFACTS_DIAGTTYSIZE_NOT_SUPPORTED (0x00000000)
struct mpi3_mgmt_passthrough_request {
__le16 host_tag;
u8 ioc_use_only02;
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_transport.h b/drivers/scsi/mpi3mr/mpi/mpi30_transport.h
index 1e0a3dcaf723..fdc3d1968e43 100644
--- a/drivers/scsi/mpi3mr/mpi/mpi30_transport.h
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_transport.h
@@ -18,7 +18,7 @@ union mpi3_version_union {
#define MPI3_VERSION_MAJOR (3)
#define MPI3_VERSION_MINOR (0)
-#define MPI3_VERSION_UNIT (28)
+#define MPI3_VERSION_UNIT (31)
#define MPI3_VERSION_DEV (0)
#define MPI3_DEVHANDLE_INVALID (0xffff)
struct mpi3_sysif_oper_queue_indexes {
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 07accf01be0f..0f102ba49759 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -1280,7 +1280,7 @@ mpi3mr_revalidate_factsdata(struct mpi3mr_ioc *mrioc)
mrioc->shost->max_sectors * 512, mrioc->facts.max_data_length);
if ((mrioc->sas_transport_enabled) && (mrioc->facts.ioc_capabilities &
- MPI3_IOCFACTS_CAPABILITY_MULTIPATH_ENABLED))
+ MPI3_IOCFACTS_CAPABILITY_MULTIPATH_SUPPORTED))
ioc_err(mrioc,
"critical error: multipath capability is enabled at the\n"
"\tcontroller while sas transport support is enabled at the\n"
@@ -3677,8 +3677,8 @@ static const struct {
u32 capability;
char *name;
} mpi3mr_capabilities[] = {
- { MPI3_IOCFACTS_CAPABILITY_RAID_CAPABLE, "RAID" },
- { MPI3_IOCFACTS_CAPABILITY_MULTIPATH_ENABLED, "MultiPath" },
+ { MPI3_IOCFACTS_CAPABILITY_RAID_SUPPORTED, "RAID" },
+ { MPI3_IOCFACTS_CAPABILITY_MULTIPATH_SUPPORTED, "MultiPath" },
};
/**
@@ -3960,7 +3960,7 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
MPI3MR_HOST_IOS_KDUMP);
if (!(mrioc->facts.ioc_capabilities &
- MPI3_IOCFACTS_CAPABILITY_MULTIPATH_ENABLED)) {
+ MPI3_IOCFACTS_CAPABILITY_MULTIPATH_SUPPORTED)) {
mrioc->sas_transport_enabled = 1;
mrioc->scsi_device_channel = 1;
mrioc->shost->max_channel = 1;
--
2.31.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4209 bytes --]
next prev parent reply other threads:[~2024-03-07 15:11 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-07 15:08 [PATCH v2 0/7] mpi3mr: Few Enhancements and minor fixes Ranjan Kumar
2024-03-07 15:08 ` [PATCH v2 1/7] mpi3mr: Block devices are not removed from OS even vd's are offlined Ranjan Kumar
2024-03-07 15:08 ` [PATCH v2 2/7] mpi3mr: Set MPI request flags appropriately Ranjan Kumar
2024-03-07 15:08 ` [PATCH v2 3/7] mpi3mr: Clear controller-wide flag that is used to block IOCTLS for the unresponsive controller Ranjan Kumar
2024-03-07 15:08 ` [PATCH v2 4/7] mpi3mr: Set the WriteSame Divert Capability in the IOCInit MPI Request Ranjan Kumar
2024-03-07 15:08 ` [PATCH v2 5/7] mpi3mr: Debug ability improvements Ranjan Kumar
2024-03-08 11:40 ` kernel test robot
2024-03-07 15:08 ` Ranjan Kumar [this message]
2024-03-07 15:08 ` [PATCH v2 7/7] mpi3mr: driver version upgrade to 8.8.1.0.50 Ranjan Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240307150825.7613-7-ranjan.kumar@broadcom.com \
--to=ranjan.kumar@broadcom.com \
--cc=chandrakanth.patil@broadcom.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=prayas.patel@broadcom.com \
--cc=rajsekhar.chundru@broadcom.com \
--cc=sathya.prakash@broadcom.com \
--cc=sumit.saxena@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox