linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Bart Van Assche <bvanassche@acm.org>
Cc: "Martin K . Petersen" <martin.petersen@oracle.com>,
	linux-scsi@vger.kernel.org,
	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>,
	Avri Altman <avri.altman@wdc.com>,
	Peter Wang <peter.wang@mediatek.com>,
	Andrew Halaney <ahalaney@redhat.com>,
	Bean Huo <beanhuo@micron.com>, Minwoo Im <minwoo.im@samsung.com>,
	Maramaina Naresh <quic_mnaresh@quicinc.com>,
	Akinobu Mita <akinobu.mita@gmail.com>
Subject: Re: [PATCH v4 6/9] scsi: ufs: Inline is_mcq_enabled()
Date: Wed, 3 Jul 2024 18:33:09 +0530	[thread overview]
Message-ID: <20240703130309.GC3498@thinkpad> (raw)
In-Reply-To: <20240702204020.2489324-7-bvanassche@acm.org>

On Tue, Jul 02, 2024 at 01:39:14PM -0700, Bart Van Assche wrote:
> Improve code readability by inlining is_mcq_enabled().
> 
> Signed-off-by: Bart Van Assche <bvanassche@acm.org>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

- Mani

> ---
>  drivers/ufs/core/ufshcd.c | 28 ++++++++++++++--------------
>  include/ufs/ufshcd.h      |  5 -----
>  2 files changed, 14 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
> index 178b0abaeb30..4c138f42a802 100644
> --- a/drivers/ufs/core/ufshcd.c
> +++ b/drivers/ufs/core/ufshcd.c
> @@ -453,7 +453,7 @@ static void ufshcd_add_command_trace(struct ufs_hba *hba, unsigned int tag,
>  
>  	intr = ufshcd_readl(hba, REG_INTERRUPT_STATUS);
>  
> -	if (is_mcq_enabled(hba)) {
> +	if (hba->mcq_enabled) {
>  		struct ufs_hw_queue *hwq = ufshcd_mcq_req_to_hwq(hba, rq);
>  
>  		hwq_id = hwq->id;
> @@ -2301,7 +2301,7 @@ void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag,
>  	if (unlikely(ufshcd_should_inform_monitor(hba, lrbp)))
>  		ufshcd_start_monitor(hba, lrbp);
>  
> -	if (is_mcq_enabled(hba)) {
> +	if (hba->mcq_enabled) {
>  		int utrd_size = sizeof(struct utp_transfer_req_desc);
>  		struct utp_transfer_req_desc *src = lrbp->utr_descriptor_ptr;
>  		struct utp_transfer_req_desc *dest;
> @@ -3000,7 +3000,7 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
>  		goto out;
>  	}
>  
> -	if (is_mcq_enabled(hba))
> +	if (hba->mcq_enabled)
>  		hwq = ufshcd_mcq_req_to_hwq(hba, scsi_cmd_to_rq(cmd));
>  
>  	ufshcd_send_command(hba, tag, hwq);
> @@ -3059,7 +3059,7 @@ static int ufshcd_clear_cmd(struct ufs_hba *hba, u32 task_tag)
>  	unsigned long flags;
>  	int err;
>  
> -	if (is_mcq_enabled(hba)) {
> +	if (hba->mcq_enabled) {
>  		/*
>  		 * MCQ mode. Clean up the MCQ resources similar to
>  		 * what the ufshcd_utrl_clear() does for SDB mode.
> @@ -3169,7 +3169,7 @@ static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba,
>  			__func__, lrbp->task_tag);
>  
>  		/* MCQ mode */
> -		if (is_mcq_enabled(hba)) {
> +		if (hba->mcq_enabled) {
>  			/* successfully cleared the command, retry if needed */
>  			if (ufshcd_clear_cmd(hba, lrbp->task_tag) == 0)
>  				err = -EAGAIN;
> @@ -5560,7 +5560,7 @@ static int ufshcd_poll(struct Scsi_Host *shost, unsigned int queue_num)
>  	u32 tr_doorbell;
>  	struct ufs_hw_queue *hwq;
>  
> -	if (is_mcq_enabled(hba)) {
> +	if (hba->mcq_enabled) {
>  		hwq = &hba->uhq[queue_num];
>  
>  		return ufshcd_mcq_poll_cqe_lock(hba, hwq);
> @@ -6201,7 +6201,7 @@ static void ufshcd_exception_event_handler(struct work_struct *work)
>  /* Complete requests that have door-bell cleared */
>  static void ufshcd_complete_requests(struct ufs_hba *hba, bool force_compl)
>  {
> -	if (is_mcq_enabled(hba))
> +	if (hba->mcq_enabled)
>  		ufshcd_mcq_compl_pending_transfer(hba, force_compl);
>  	else
>  		ufshcd_transfer_req_compl(hba);
> @@ -6458,7 +6458,7 @@ static bool ufshcd_abort_one(struct request *rq, void *priv)
>  		*ret ? "failed" : "succeeded");
>  
>  	/* Release cmd in MCQ mode if abort succeeds */
> -	if (is_mcq_enabled(hba) && (*ret == 0)) {
> +	if (hba->mcq_enabled && (*ret == 0)) {
>  		hwq = ufshcd_mcq_req_to_hwq(hba, scsi_cmd_to_rq(lrbp->cmd));
>  		spin_lock_irqsave(&hwq->cq_lock, flags);
>  		if (ufshcd_cmd_inflight(lrbp->cmd))
> @@ -7389,7 +7389,7 @@ static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd)
>  		goto out;
>  	}
>  
> -	if (is_mcq_enabled(hba)) {
> +	if (hba->mcq_enabled) {
>  		for (pos = 0; pos < hba->nutrs; pos++) {
>  			lrbp = &hba->lrb[pos];
>  			if (ufshcd_cmd_inflight(lrbp->cmd) &&
> @@ -7485,7 +7485,7 @@ int ufshcd_try_to_abort_task(struct ufs_hba *hba, int tag)
>  			 */
>  			dev_err(hba->dev, "%s: cmd at tag %d not pending in the device.\n",
>  				__func__, tag);
> -			if (is_mcq_enabled(hba)) {
> +			if (hba->mcq_enabled) {
>  				/* MCQ mode */
>  				if (ufshcd_cmd_inflight(lrbp->cmd)) {
>  					/* sleep for max. 200us same delay as in SDB mode */
> @@ -7563,7 +7563,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
>  
>  	ufshcd_hold(hba);
>  
> -	if (!is_mcq_enabled(hba)) {
> +	if (!hba->mcq_enabled) {
>  		reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
>  		if (!test_bit(tag, &hba->outstanding_reqs)) {
>  			/* If command is already aborted/completed, return FAILED. */
> @@ -7596,7 +7596,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
>  	}
>  	hba->req_abort_count++;
>  
> -	if (!is_mcq_enabled(hba) && !(reg & (1 << tag))) {
> +	if (!hba->mcq_enabled && !(reg & (1 << tag))) {
>  		/* only execute this code in single doorbell mode */
>  		dev_err(hba->dev,
>  		"%s: cmd was completed, but without a notifying intr, tag = %d",
> @@ -7623,7 +7623,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
>  		goto release;
>  	}
>  
> -	if (is_mcq_enabled(hba)) {
> +	if (hba->mcq_enabled) {
>  		/* MCQ mode. Branch off to handle abort for mcq mode */
>  		err = ufshcd_mcq_abort(cmd);
>  		goto release;
> @@ -8732,7 +8732,7 @@ static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params)
>  	ufshcd_set_link_active(hba);
>  
>  	/* Reconfigure MCQ upon reset */
> -	if (is_mcq_enabled(hba) && !init_dev_params)
> +	if (hba->mcq_enabled && !init_dev_params)
>  		ufshcd_config_mcq(hba);
>  
>  	/* Verify device initialization by sending NOP OUT UPIU */
> diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
> index d4d63507d090..c0e28a512b3c 100644
> --- a/include/ufs/ufshcd.h
> +++ b/include/ufs/ufshcd.h
> @@ -1132,11 +1132,6 @@ struct ufs_hw_queue {
>  
>  #define MCQ_QCFG_SIZE		0x40
>  
> -static inline bool is_mcq_enabled(struct ufs_hba *hba)
> -{
> -	return hba->mcq_enabled;
> -}
> -
>  static inline unsigned int ufshcd_mcq_opr_offset(struct ufs_hba *hba,
>  		enum ufshcd_mcq_opr opr, int idx)
>  {

-- 
மணிவண்ணன் சதாசிவம்

  parent reply	other threads:[~2024-07-03 13:03 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-02 20:39 [PATCH v4 0/9] UFS patches for kernel 6.11 Bart Van Assche
2024-07-02 20:39 ` [PATCH v4 1/9] scsi: ufs: Declare functions once Bart Van Assche
2024-07-02 20:39 ` [PATCH v4 2/9] scsi: ufs: Initialize struct uic_command once Bart Van Assche
2024-07-02 20:39 ` [PATCH v4 3/9] scsi: ufs: Remove two constants Bart Van Assche
2024-07-02 20:39 ` [PATCH v4 4/9] scsi: ufs: Rename the MASK_TRANSFER_REQUESTS_SLOTS constant Bart Van Assche
2024-07-03 12:59   ` Manivannan Sadhasivam
2024-07-02 20:39 ` [PATCH v4 5/9] scsi: ufs: Initialize hba->reserved_slot earlier Bart Van Assche
2024-07-03 13:01   ` Manivannan Sadhasivam
2024-07-02 20:39 ` [PATCH v4 6/9] scsi: ufs: Inline is_mcq_enabled() Bart Van Assche
2024-07-03  8:58   ` Peter Wang (王信友)
2024-07-03 13:03   ` Manivannan Sadhasivam [this message]
2024-07-02 20:39 ` [PATCH v4 7/9] scsi: ufs: Move the ufshcd_mcq_enable() call Bart Van Assche
2024-07-03  8:59   ` Peter Wang (王信友)
2024-07-03 13:10   ` Manivannan Sadhasivam
2024-07-03 20:32     ` Bart Van Assche
2024-07-02 20:39 ` [PATCH v4 8/9] scsi: ufs: Inline ufshcd_mcq_vops_get_hba_mac() Bart Van Assche
2024-07-02 20:39 ` [PATCH v4 9/9] scsi: ufs: Make .get_hba_mac() optional Bart Van Assche
2024-07-03  9:00   ` Peter Wang (王信友)
2024-07-03 13:22   ` Manivannan Sadhasivam
2024-07-03 20:36     ` Bart Van Assche
2024-07-06 16:33       ` Manivannan Sadhasivam
2024-07-07  3:24         ` Bart Van Assche
2024-07-08 10:44           ` Manivannan Sadhasivam
2024-07-08 17:10             ` Bart Van Assche
2024-07-08 18:06               ` Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240703130309.GC3498@thinkpad \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=ahalaney@redhat.com \
    --cc=akinobu.mita@gmail.com \
    --cc=avri.altman@wdc.com \
    --cc=beanhuo@micron.com \
    --cc=bvanassche@acm.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=minwoo.im@samsung.com \
    --cc=peter.wang@mediatek.com \
    --cc=quic_mnaresh@quicinc.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).