public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: Justin Tee <justintee8345@gmail.com>
To: linux-scsi@vger.kernel.org
Cc: jsmart2021@gmail.com, justin.tee@broadcom.com,
	Justin Tee <justintee8345@gmail.com>
Subject: [PATCH 6/8] lpfc: Update PRLO handling in direct attached topology
Date: Fri, 26 Jul 2024 16:15:10 -0700	[thread overview]
Message-ID: <20240726231512.92867-7-justintee8345@gmail.com> (raw)
In-Reply-To: <20240726231512.92867-1-justintee8345@gmail.com>

A kref imbalance occurs when handling an unsolicited PRLO in direct
attached topology.

Rework PRLO rcv handling when in MAPPED state.  Save the state that we were
handling a PRLO by setting nlp_last_elscmd to ELS_CMD_PRLO.  Then in the
lpfc_cmpl_els_logo_acc completion routine, manually restart discovery.  By
issuing the PLOGI, which nlp_gets, before nlp_put at the end of the
lpfc_cmpl_els_logo_acc routine, we are saving us from a final nlp_put.
And, we are still allowing the unreg_rpi to happen.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
---
 drivers/scsi/lpfc/lpfc_els.c       | 27 ++++++++++++++++-----------
 drivers/scsi/lpfc/lpfc_nportdisc.c | 22 ++++++++++++++++++++--
 2 files changed, 36 insertions(+), 13 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index b5a8d050419a..de0ec945d2f1 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5246,9 +5246,10 @@ lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 	/* ACC to LOGO completes to NPort <nlp_DID> */
 	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
 			 "0109 ACC to LOGO completes to NPort x%x refcnt %d "
-			 "Data: x%x x%x x%x\n",
-			 ndlp->nlp_DID, kref_read(&ndlp->kref), ndlp->nlp_flag,
-			 ndlp->nlp_state, ndlp->nlp_rpi);
+			 "last els x%x Data: x%x x%x x%x\n",
+			 ndlp->nlp_DID, kref_read(&ndlp->kref),
+			 ndlp->nlp_last_elscmd, ndlp->nlp_flag, ndlp->nlp_state,
+			 ndlp->nlp_rpi);
 
 	/* This clause allows the LOGO ACC to complete and free resources
 	 * for the Fabric Domain Controller.  It does deliberately skip
@@ -5260,18 +5261,22 @@ lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		goto out;
 
 	if (ndlp->nlp_state == NLP_STE_NPR_NODE) {
-		/* If PLOGI is being retried, PLOGI completion will cleanup the
-		 * node. The NLP_NPR_2B_DISC flag needs to be retained to make
-		 * progress on nodes discovered from last RSCN.
-		 */
-		if ((ndlp->nlp_flag & NLP_DELAY_TMO) &&
-		    (ndlp->nlp_last_elscmd == ELS_CMD_PLOGI))
-			goto out;
-
 		if (ndlp->nlp_flag & NLP_RPI_REGISTERED)
 			lpfc_unreg_rpi(vport, ndlp);
 
+		/* If came from PRLO, then PRLO_ACC is done.
+		 * Start rediscovery now.
+		 */
+		if (ndlp->nlp_last_elscmd == ELS_CMD_PRLO) {
+			spin_lock_irq(&ndlp->lock);
+			ndlp->nlp_flag |= NLP_NPR_2B_DISC;
+			spin_unlock_irq(&ndlp->lock);
+			ndlp->nlp_prev_state = ndlp->nlp_state;
+			lpfc_nlp_set_state(vport, ndlp, NLP_STE_PLOGI_ISSUE);
+			lpfc_issue_els_plogi(vport, ndlp->nlp_DID, 0);
+		}
 	}
+
  out:
 	/*
 	 * The driver received a LOGO from the rport and has ACK'd it.
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index f6a53446e57f..4574716c8764 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -2652,8 +2652,26 @@ lpfc_rcv_prlo_mapped_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	/* flush the target */
 	lpfc_sli_abort_iocb(vport, ndlp->nlp_sid, 0, LPFC_CTX_TGT);
 
-	/* Treat like rcv logo */
-	lpfc_rcv_logo(vport, ndlp, cmdiocb, ELS_CMD_PRLO);
+	/* Send PRLO_ACC */
+	spin_lock_irq(&ndlp->lock);
+	ndlp->nlp_flag |= NLP_LOGO_ACC;
+	spin_unlock_irq(&ndlp->lock);
+	lpfc_els_rsp_acc(vport, ELS_CMD_PRLO, cmdiocb, ndlp, NULL);
+
+	/* Save ELS_CMD_PRLO as the last elscmd and then set to NPR.
+	 * lpfc_cmpl_els_logo_acc is expected to restart discovery.
+	 */
+	ndlp->nlp_last_elscmd = ELS_CMD_PRLO;
+	ndlp->nlp_prev_state = ndlp->nlp_state;
+
+	lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE | LOG_ELS | LOG_DISCOVERY,
+			 "3422 DID x%06x nflag x%x lastels x%x ref cnt %u\n",
+			 ndlp->nlp_DID, ndlp->nlp_flag,
+			 ndlp->nlp_last_elscmd,
+			 kref_read(&ndlp->kref));
+
+	lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
+
 	return ndlp->nlp_state;
 }
 
-- 
2.38.0


  parent reply	other threads:[~2024-07-26 23:00 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-26 23:15 [PATCH 0/8] Update lpfc to revision 14.4.0.4 Justin Tee
2024-07-26 23:15 ` [PATCH 1/8] lpfc: Change diagnostic log flag during receipt of unknown ELS cmds Justin Tee
2024-07-26 23:15 ` [PATCH 2/8] lpfc: Remove redundant vport assignment when building an abort request Justin Tee
2024-07-26 23:15 ` [PATCH 3/8] lpfc: Validate hdwq pointers before dereferencing in reset/errata paths Justin Tee
2024-07-26 23:15 ` [PATCH 4/8] lpfc: Fix unintentional double clearing of vmid_flag Justin Tee
2024-07-26 23:15 ` [PATCH 5/8] lpfc: Fix unsolicited FLOGI kref imbalance when in direct attached topology Justin Tee
2024-07-26 23:15 ` Justin Tee [this message]
2024-07-26 23:15 ` [PATCH 7/8] lpfc: Update lpfc version to 14.4.0.4 Justin Tee
2024-07-26 23:15 ` [PATCH 8/8] lpfc: Copyright updates for 14.4.0.4 patches Justin Tee
2024-08-03  1:50 ` [PATCH 0/8] Update lpfc to revision 14.4.0.4 Martin K. Petersen
2024-08-05 21:17 ` Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240726231512.92867-7-justintee8345@gmail.com \
    --to=justintee8345@gmail.com \
    --cc=jsmart2021@gmail.com \
    --cc=justin.tee@broadcom.com \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox