[PATCH 01/11] lpfc: Modify cgn warning signal calculation based on EDC response

[Justin Tee <justintee8345@gmail.com>]

CGN warning signals are currently statically fixed to a passed in driver
parameter called lpfc_fabric_cgn_frequency.  However, CGN frequency should
be more correctly based on EDC responses from the fabric when available.
Otherwise, still allow the driver to fall back on user configured
lpfc_fabric_cgn_frequency driver parameter.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
---
 drivers/scsi/lpfc/lpfc_sli.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 2ec6e55771b4..80a43fd40af2 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1932,7 +1932,7 @@ lpfc_issue_cmf_sync_wqe(struct lpfc_hba *phba, u32 ms, u64 total)
 	union lpfc_wqe128 *wqe;
 	struct lpfc_iocbq *sync_buf;
 	unsigned long iflags;
-	u32 ret_val;
+	u32 ret_val, cgn_sig_freq;
 	u32 atot, wtot, max;
 	u8 warn_sync_period = 0;
 
@@ -1987,8 +1987,10 @@ lpfc_issue_cmf_sync_wqe(struct lpfc_hba *phba, u32 ms, u64 total)
 	} else if (wtot) {
 		if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ONLY ||
 		    phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM) {
+			cgn_sig_freq = phba->cgn_sig_freq ? phba->cgn_sig_freq :
+					lpfc_fabric_cgn_frequency;
 			/* We hit an Signal warning condition */
-			max = LPFC_SEC_TO_MSEC / lpfc_fabric_cgn_frequency *
+			max = LPFC_SEC_TO_MSEC / cgn_sig_freq *
 				lpfc_acqe_cgn_frequency;
 			bf_set(cmf_sync_wsigmax, &wqe->cmf_sync, max);
 			bf_set(cmf_sync_wsigcnt, &wqe->cmf_sync, wtot);
-- 
2.38.0