linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org, Bart Van Assche <bvanassche@acm.org>,
	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>,
	Peter Wang <peter.wang@mediatek.com>,
	Avri Altman <avri.altman@wdc.com>,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
	"Bao D. Nguyen" <quic_nguyenb@quicinc.com>
Subject: [PATCH 18/24] scsi: ufs: core: Allocate the SCSI host earlier
Date: Thu,  3 Apr 2025 14:18:02 -0700	[thread overview]
Message-ID: <20250403211937.2225615-19-bvanassche@acm.org> (raw)
In-Reply-To: <20250403211937.2225615-1-bvanassche@acm.org>

Call ufshcd_add_scsi_host() before any UPIU commands are sent to the UFS
device. This patch prepares for letting ufshcd_add_scsi_host() allocate
memory for both SCSI and UPIU commands.

Initially, allocate 32 commands (SCSI + reserved). In ufshcd_alloc_mcq(),
increase the SCSI host queue depth if necessary.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/ufs/core/ufshcd.c | 39 ++++++++++++++++++++++++++++++++++-----
 1 file changed, 34 insertions(+), 5 deletions(-)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 6dcac4143f4f..7cbc7a3cf2db 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -8941,6 +8941,32 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie)
 	ktime_t probe_start;
 	int ret;
 
+	if (is_mcq_supported(hba)) {
+		ufshcd_mcq_enable(hba);
+		ret = ufshcd_alloc_mcq(hba, hba->dev_info.bqueuedepth);
+		if (ret == 0) {
+			pr_info("%s: hba->nutrs = %d\n", __func__, hba->nutrs);
+			ufshcd_config_mcq(hba);
+			ret = scsi_host_update_can_queue(
+				hba->host, hba->nutrs - UFSHCD_NUM_RESERVED);
+			if (ret)
+				goto out;
+		} else {
+			/* Continue with SDB mode */
+			ufshcd_mcq_disable(hba);
+			use_mcq_mode = false;
+			dev_err(hba->dev, "MCQ mode is disabled, err=%d\n",
+				ret);
+		}
+	}
+	if (!is_mcq_supported(hba) && !hba->lsdb_sup) {
+		dev_err(hba->dev,
+			"%s: failed to initialize (legacy doorbell mode not supported)\n",
+			__func__);
+		ret = -EINVAL;
+		goto out;
+	}
+
 	down(&hba->host_sem);
 	/* Initialize hba, detect and initialize UFS device */
 	probe_start = ktime_get();
@@ -10427,9 +10453,12 @@ static int ufshcd_add_scsi_host(struct ufs_hba *hba)
 {
 	int err;
 
+	WARN_ON_ONCE(!hba->host->can_queue);
+	WARN_ON_ONCE(!hba->host->cmd_per_lun);
+
 	if (is_mcq_supported(hba)) {
 		ufshcd_mcq_enable(hba);
-		err = ufshcd_alloc_mcq(hba, hba->dev_info.bqueuedepth);
+		err = ufshcd_alloc_mcq(hba, 32);
 		if (!err) {
 			ufshcd_config_mcq(hba);
 		} else {
@@ -10667,6 +10696,10 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 			    FIELD_PREP(UFSHCI_AHIBERN8_SCALE_MASK, 3);
 	}
 
+	err = ufshcd_add_scsi_host(hba);
+	if (err)
+		goto out_disable;
+
 	/* Hold auto suspend until async scan completes */
 	pm_runtime_get_sync(dev);
 
@@ -10717,10 +10750,6 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 	if (err)
 		goto out_disable;
 
-	err = ufshcd_add_scsi_host(hba);
-	if (err)
-		goto out_disable;
-
 	async_schedule(ufshcd_async_scan, hba);
 	ufs_sysfs_add_nodes(hba->dev);
 

  parent reply	other threads:[~2025-04-03 21:23 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-03 21:17 [PATCH 00/24] Optimize the hot path in the UFS driver Bart Van Assche
2025-04-03 21:17 ` [PATCH 01/24] scsi: core: Make scsi_cmd_to_rq() accept const arguments Bart Van Assche
2025-04-04 10:39   ` John Garry
2025-04-04 16:23     ` Bart Van Assche
2025-08-18  6:03   ` Hannes Reinecke
2025-08-18 17:17     ` Bart Van Assche
2025-04-03 21:17 ` [PATCH 02/24] scsi: core: Make scsi_cmd_priv() " Bart Van Assche
2025-04-03 21:17 ` [PATCH 03/24] scsi: core: Use scsi_cmd_priv() instead of open-coding it Bart Van Assche
2025-04-03 21:17 ` [PATCH 04/24] scsi: core: Implement reserved command handling Bart Van Assche
2025-04-04 10:49   ` John Garry
2025-04-04 16:34     ` Bart Van Assche
2025-04-04 17:34       ` John Garry
2025-04-14 21:59         ` Bart Van Assche
2025-04-15 17:21         ` Bart Van Assche
2025-04-16  7:16           ` John Garry
2025-04-16  7:39             ` Hannes Reinecke
2025-04-16  8:23               ` John Garry
2025-04-17 21:25             ` Bart Van Assche
2025-04-22  6:54               ` Hannes Reinecke
2025-08-05 22:33               ` Bart Van Assche
2025-08-07 15:40                 ` Bart Van Assche
2025-04-16  7:33           ` Hannes Reinecke
2025-08-07 16:35             ` Bart Van Assche
2025-04-03 21:17 ` [PATCH 05/24] scsi: core: Introduce scsi_host_update_can_queue() Bart Van Assche
2025-04-03 21:17 ` [PATCH 06/24] scsi: ufs: core: Change the type of one ufshcd_add_cmd_upiu_trace() argument Bart Van Assche
2025-04-09  5:34   ` Avri Altman
2025-04-14 12:47   ` Peter Wang (王信友)
2025-04-03 21:17 ` [PATCH 07/24] scsi: ufs: core: Only call ufshcd_add_command_trace() for SCSI commands Bart Van Assche
2025-04-09  6:24   ` Avri Altman
2025-04-14 12:47   ` Peter Wang (王信友)
2025-04-03 21:17 ` [PATCH 08/24] scsi: ufs: core: Change the type of one ufshcd_add_command_trace() argument Bart Van Assche
2025-04-09  6:32   ` Avri Altman
2025-04-09 16:37     ` Bart Van Assche
2025-04-14 12:47   ` Peter Wang (王信友)
2025-04-03 21:17 ` [PATCH 09/24] scsi: ufs: core: Change the type of one ufshcd_send_command() argument Bart Van Assche
2025-04-09  6:34   ` Avri Altman
2025-04-14 12:48   ` Peter Wang (王信友)
2025-04-03 21:17 ` [PATCH 10/24] scsi: ufs: core: Only call ufshcd_should_inform_monitor() for SCSI commands Bart Van Assche
2025-04-15  7:34   ` Peter Wang (王信友)
2025-04-03 21:17 ` [PATCH 11/24] scsi: ufs: core: Change the monitor function argument types Bart Van Assche
2025-04-15  7:37   ` Peter Wang (王信友)
2025-04-15 20:10     ` Bart Van Assche
2025-04-03 21:17 ` [PATCH 12/24] scsi: ufs: core: Rework ufshcd_mcq_compl_pending_transfer() Bart Van Assche
2025-04-15  8:00   ` Peter Wang (王信友)
2025-04-15 20:22     ` Bart Van Assche
2025-04-17 12:39       ` Peter Wang (王信友)
2025-04-17 21:33         ` Bart Van Assche
2025-04-22 13:07           ` Peter Wang (王信友)
2025-04-03 21:17 ` [PATCH 13/24] scsi: ufs: core: Rework ufshcd_eh_device_reset_handler() Bart Van Assche
2025-04-03 21:17 ` [PATCH 14/24] scsi: ufs: core: Cache the DMA buffer sizes Bart Van Assche
2025-04-03 21:17 ` [PATCH 15/24] scsi: ufs: core: Add an argument to ufshcd_mcq_decide_queue_depth() Bart Van Assche
2025-04-03 21:18 ` [PATCH 16/24] scsi: ufs: core: Add an argument to ufshcd_alloc_mcq() Bart Van Assche
2025-04-03 21:18 ` [PATCH 17/24] scsi: ufs: core: Call ufshcd_mcq_init() once Bart Van Assche
2025-04-09  6:52   ` Avri Altman
2025-04-09 16:42     ` Bart Van Assche
2025-04-03 21:18 ` Bart Van Assche [this message]
2025-04-03 21:18 ` [PATCH 19/24] scsi: ufs: core: Call ufshcd_init_lrb() later Bart Van Assche
2025-04-03 21:18 ` [PATCH 20/24] scsi: ufs: core: Use hba->reserved_slot Bart Van Assche
2025-04-03 21:18 ` [PATCH 21/24] scsi: ufs: core: Allocate the reserved slot as a reserved request Bart Van Assche
2025-04-03 21:18 ` [PATCH 22/24] scsi: ufs: core: Do not clear driver-private command data Bart Van Assche
2025-04-03 21:18 ` [PATCH 23/24] scsi: ufs: core: Optimize the hot path Bart Van Assche
2025-04-03 21:18 ` [PATCH 24/24] scsi: ufs: core: Remove the ufshcd_lrb task_tag member Bart Van Assche
2025-04-04 10:15 ` [PATCH 00/24] Optimize the hot path in the UFS driver John Garry
2025-04-04 17:05   ` Bart Van Assche
2025-04-05 12:03     ` Avri Altman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250403211937.2225615-19-bvanassche@acm.org \
    --to=bvanassche@acm.org \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=avri.altman@wdc.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=martin.petersen@oracle.com \
    --cc=peter.wang@mediatek.com \
    --cc=quic_nguyenb@quicinc.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).