[PATCH 0/5] smartpqi updates

[PATCH 0/5] smartpqi updates

[Don Brace]

These patches are based on Martin Petersen's 6.16/scsi-queue tree
  https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git
  6.16/scsi-queue

There are two main functional changes in this patch series:
smartpqi-take-drives-offline-when-controller-is-offline
smartpqi-fix-smp_processor_id-call-trace-for-preemptible-kernels

The other two patches add PCI-IDs for new controllers and change the
driver version.

This set of changes consists of:
* smartpqi-take-drives-offline-when-controller-is-offline
     On rare occasions, the controller can lock up and the driver was
     removing the controller instance from OS but leaving the
     drives exposed and their state was still 'running'.

     This patch sets the drive state as 'offline' to avoid confusion.
* smartpqi-add-new-pci_ids
     Add support for more PCI devices.
* smartpqi-enhance_wwid-logging-logic
     Cosmetic change for logging WWIDs for NVMe devices and for drives
     that support the extended format.
* smartpqi-fix-smp_processor_id-call-trace-for-preemptible-kernels
     When preemption is enabled, there are call traces in the console
     logs which are annoying. The call trace mentions using
     smp_processor_id(). Since the driver is only using this function call
     when accessing a per_cpu variable, we changed the call to
     raw_smp_processor_id(). This patch was written by
     Yi Zhang <yi.zhang@redhat.com> and I am posting it on his behalf.
* smartpqi-update-driver-version-to-2.1.34-035
     No functional changes.

---

David Strahan (2):
  smartpqi: take drives offline when controller is offline
  smartpqi: add new pci ids

Don Brace (1):
  smartpqi: update driver version to 2.1.34-035

Venkatesh Emparala (1):
  Enhance WWID Logging Logic.

Yi Zhang (1):
  smartpqi: fix smp_processor_id() call trace for preemptible kernels

 drivers/scsi/smartpqi/smartpqi_init.c | 140 ++++++++++++++++++++++++--
 1 file changed, 130 insertions(+), 10 deletions(-)

-- 
2.49.0.391.g4bbb303af6

[PATCH 1/5] smartpqi: take drives offline when controller is offline

[Don Brace]

From: David Strahan <david.strahan@microchip.com>

When the controller is unexpectedly taken offline, show its drives
as offline.

During a controller lockup, the physical and logical drives under the
locked up controller are still listed at the OS level.

I.E.
The controller is offline but the status of each drive is 'running'.

Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: David Strahan <david.strahan@microchip.com>
Co-developed-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
---
 drivers/scsi/smartpqi/smartpqi_init.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 88135fdb8bd1..73f576ccf511 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -67,6 +67,7 @@ static struct pqi_cmd_priv *pqi_cmd_priv(struct scsi_cmnd *cmd)
 static void pqi_verify_structures(void);
 static void pqi_take_ctrl_offline(struct pqi_ctrl_info *ctrl_info,
 	enum pqi_ctrl_shutdown_reason ctrl_shutdown_reason);
+static void pqi_take_ctrl_devices_offline(struct pqi_ctrl_info *ctrl_info);
 static void pqi_ctrl_offline_worker(struct work_struct *work);
 static int pqi_scan_scsi_devices(struct pqi_ctrl_info *ctrl_info);
 static void pqi_scan_start(struct Scsi_Host *shost);
@@ -9128,6 +9129,7 @@ static void pqi_take_ctrl_offline_deferred(struct pqi_ctrl_info *ctrl_info)
 	pqi_ctrl_wait_until_quiesced(ctrl_info);
 	pqi_fail_all_outstanding_requests(ctrl_info);
 	pqi_ctrl_unblock_requests(ctrl_info);
+	pqi_take_ctrl_devices_offline(ctrl_info);
 }
 
 static void pqi_ctrl_offline_worker(struct work_struct *work)
@@ -9202,6 +9204,27 @@ static void pqi_take_ctrl_offline(struct pqi_ctrl_info *ctrl_info,
 	schedule_work(&ctrl_info->ctrl_offline_work);
 }
 
+static void pqi_take_ctrl_devices_offline(struct pqi_ctrl_info *ctrl_info)
+{
+	int rc;
+	unsigned long flags;
+	struct pqi_scsi_dev *device;
+
+	spin_lock_irqsave(&ctrl_info->scsi_device_list_lock, flags);
+	list_for_each_entry(device, &ctrl_info->scsi_device_list, scsi_device_list_entry) {
+		rc = list_is_last(&device->scsi_device_list_entry, &ctrl_info->scsi_device_list);
+		if (rc)
+			continue;
+
+		/*
+		 * Is the sdev pointer NULL?
+		 */
+		if (device->sdev)
+			scsi_device_set_state(device->sdev, SDEV_OFFLINE);
+	}
+	spin_unlock_irqrestore(&ctrl_info->scsi_device_list_lock, flags);
+}
+
 static void pqi_print_ctrl_info(struct pci_dev *pci_dev,
 	const struct pci_device_id *id)
 {
-- 
2.49.0.391.g4bbb303af6

[PATCH 2/5] smartpqi: add new pci ids

[Don Brace]

From: David Strahan <david.strahan@microchip.com>

Add in support for more PCI devices.

All PCI ID entries in Hex.

Add PCI IDs for Ramaxel controllers:
                                                  VID  / DID  / SVID / SDID
                                                  ----   ----   ----   ----
                      Ramaxel SmartHBA RX8238-16i 9005   028f   1018   8238
                      Ramaxel SSSRAID card        9005   028f   1f3f   0610

Add PCI ID for Alibaba controller:
                                                  VID  / DID  / SVID / SDID
                                                  ----   ----   ----   ----
                      HBA AS1340                  9005   028f   1ded   3301

Add PCI IDs for Inspur controller:
                                                  VID  / DID  / SVID / SDID
                                                  ----   ----   ----   ----
                      RT0800M6E2i                 9005   028f   1bd4   00a3

Add PCI IDs for Delta controllers:
                                                  VID  / DID  / SVID / SDID
                                                  ----   ----   ----   ----
ThinkSystem 4450-8i SAS/SATA/NVMe PCIe Gen4       9005   028f   1d49   0222
24Gb HBA
ThinkSystem 4450-16i SAS/SATA/NVMe PCIe Gen4      9005   028f   1d49   0223
24Gb HBA
ThinkSystem 4450-8e SAS/SATA PCIe Gen4            9005   028f   1d49   0224
24Gb HBA
ThinkSystem RAID 4450-16e PCIe Gen4 24Gb          9005   028f   1d49   0225
Adapter HBA
ThinkSystem RAID 5450-16i PCIe Gen4 24Gb Adapter  9005   028f   1d49   0521
ThinkSystem RAID 9450-8i 4GB Flash PCIe Gen4      9005   028f   1d49   0624
24Gb Adapter
ThinkSystem RAID 9450-16i 4GB Flash PCIe Gen4     9005   028f   1d49   0625
24Gb Adapter
ThinkSystem RAID 9450-16i 4GB Flash PCIe Gen4     9005   028f   1d49   0626
24Gb Adapter
ThinkSystem RAID 9450-32i 8GB Flash PCIe Gen4     9005   028f   1d49   0627
24Gb Adapter
ThinkSystem RAID 9450-16e 4GB Flash PCIe Gen4     9005   028f   1d49   0628
24Gb Adapter

Add PCI ID for Cloudnine Controller:
                                                  VID  / DID  / SVID / SDID
                                                  ----   ----   ----   ----
                      SmartHBA P6600-24i          9005   028f   1f51   100b

Add PCI IDs for Hurraydata Controllers:
                                                  VID  / DID  / SVID / SDID
                                                  ----   ----   ----   ----
                      HRDT TrustHBA H4100-8i      9005   028f   207d   4044
                      HRDT TrustHBA H4100-8e      9005   028f   207d   4054
                      HRDT TrustHBA H4100-16i     9005   028f   207d   4084
                      HRDT TrustHBA H4100-16e     9005   028f   207d   4094
                      HRDT TrustRAID D3152s-8i    9005   028f   207d   4140
                      HRDT TrustRAID D3154s-8i    9005   028f   207d   4240

Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: David Strahan <david.strahan@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
---
 drivers/scsi/smartpqi/smartpqi_init.c | 84 +++++++++++++++++++++++++++
 1 file changed, 84 insertions(+)

diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 73f576ccf511..3cb8619e9ce9 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -9731,6 +9731,10 @@ static const struct pci_device_id pqi_pci_id_table[] = {
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       0x1bd4, 0x0089)
 	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+				0x1bd4, 0x00a3)
+	},
 	{
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       0x1ff9, 0x00a1)
@@ -10067,6 +10071,30 @@ static const struct pci_device_id pqi_pci_id_table[] = {
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       PCI_VENDOR_ID_ADAPTEC2, 0x14f0)
 	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x207d, 0x4044)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x207d, 0x4054)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x207d, 0x4084)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x207d, 0x4094)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x207d, 0x4140)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x207d, 0x4240)
+	},
 	{
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       PCI_VENDOR_ID_ADVANTECH, 0x8312)
@@ -10283,6 +10311,14 @@ static const struct pci_device_id pqi_pci_id_table[] = {
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       0x1cc4, 0x0201)
 	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1018, 0x8238)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1f3f, 0x0610)
+	},
 	{
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       PCI_VENDOR_ID_LENOVO, 0x0220)
@@ -10291,10 +10327,30 @@ static const struct pci_device_id pqi_pci_id_table[] = {
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       PCI_VENDOR_ID_LENOVO, 0x0221)
 	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       PCI_VENDOR_ID_LENOVO, 0x0222)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       PCI_VENDOR_ID_LENOVO, 0x0223)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       PCI_VENDOR_ID_LENOVO, 0x0224)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       PCI_VENDOR_ID_LENOVO, 0x0225)
+	},
 	{
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       PCI_VENDOR_ID_LENOVO, 0x0520)
 	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       PCI_VENDOR_ID_LENOVO, 0x0521)
+	},
 	{
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       PCI_VENDOR_ID_LENOVO, 0x0522)
@@ -10315,6 +10371,26 @@ static const struct pci_device_id pqi_pci_id_table[] = {
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       PCI_VENDOR_ID_LENOVO, 0x0623)
 	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       PCI_VENDOR_ID_LENOVO, 0x0624)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       PCI_VENDOR_ID_LENOVO, 0x0625)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       PCI_VENDOR_ID_LENOVO, 0x0626)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       PCI_VENDOR_ID_LENOVO, 0x0627)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       PCI_VENDOR_ID_LENOVO, 0x0628)
+	},
 	{
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 				0x1014, 0x0718)
@@ -10343,6 +10419,10 @@ static const struct pci_device_id pqi_pci_id_table[] = {
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       0x1137, 0x0300)
 	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+				0x1ded, 0x3301)
+	},
 	{
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       0x1ff9, 0x0045)
@@ -10491,6 +10571,10 @@ static const struct pci_device_id pqi_pci_id_table[] = {
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 				0x1f51, 0x100a)
 	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+				0x1f51, 0x100b)
+	},
 	{
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       0x1f51, 0x100e)
-- 
2.49.0.391.g4bbb303af6

[PATCH 3/5] Enhance WWID Logging Logic.

[Don Brace]

From: Venkatesh Emparala <Venkatesh.Emparala@microchip.com>

Log the extended WWID for NVMe devices and for devices that have the
firmware feature bit "PQI_FIRMWARE_FEATURE_RPL_EXTENDED_FORMAT_4_5"
enabled.

Log 8-bytes otherwise.

Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Venkatesh Emparala <Venkatesh.Emparala@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
---
 drivers/scsi/smartpqi/smartpqi_init.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 3cb8619e9ce9..efc042071ec0 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -2011,18 +2011,31 @@ static void pqi_dev_info(struct pqi_ctrl_info *ctrl_info,
 			PQI_DEV_INFO_BUFFER_LENGTH - count,
 			"-:-");
 
-	if (pqi_is_logical_device(device))
+	if (pqi_is_logical_device(device)) {
 		count += scnprintf(buffer + count,
 			PQI_DEV_INFO_BUFFER_LENGTH - count,
 			" %08x%08x",
 			*((u32 *)&device->scsi3addr),
 			*((u32 *)&device->scsi3addr[4]));
-	else
+	} else if (ctrl_info->rpl_extended_format_4_5_supported) {
+		if (device->device_type == SA_DEVICE_TYPE_NVME)
+			count += scnprintf(buffer + count,
+					PQI_DEV_INFO_BUFFER_LENGTH - count,
+					" %016llx%016llx",
+					get_unaligned_be64(&device->wwid[0]),
+					get_unaligned_be64(&device->wwid[8]));
+		else
+			count += scnprintf(buffer + count,
+					PQI_DEV_INFO_BUFFER_LENGTH - count,
+					" %016llx",
+					get_unaligned_be64(&device->wwid[0]));
+	} else {
 		count += scnprintf(buffer + count,
 			PQI_DEV_INFO_BUFFER_LENGTH - count,
-			" %016llx%016llx",
-			get_unaligned_be64(&device->wwid[0]),
-			get_unaligned_be64(&device->wwid[8]));
+			" %016llx",
+			get_unaligned_be64(&device->wwid[0]));
+	}
+
 
 	count += scnprintf(buffer + count, PQI_DEV_INFO_BUFFER_LENGTH - count,
 		" %s %.8s %.16s ",
-- 
2.49.0.391.g4bbb303af6

[PATCH 4/5] smartpqi: fix smp_processor_id() call trace for preemptible kernels

[Don Brace]

From: Yi Zhang <yi.zhang@redhat.com>

Correct kernel call trace when calling smp_processor_id() when called in
preemptible kernels by using raw_smp_processor_id().

smp_processor_id() checks to see if preemption is disabled and if not,
issue an error message followed by a call to dump_stack().

Brief example of call trace:
kernel:  check_preemption_disabled: 436 callbacks suppressed
kernel:  BUG: using smp_processor_id() in preemptible [00000000]
         code: kworker/u1025:0/2354
kernel:  caller is pqi_scsi_queue_command+0x183/0x310 [smartpqi]
kernel:  CPU: 129 PID: 2354 Comm: kworker/u1025:0
kernel:  ...
kernel:  Workqueue: writeback wb_workfn (flush-253:0)
kernel:  Call Trace:
kernel:   <TASK>
kernel:   dump_stack_lvl+0x34/0x48
kernel:   check_preemption_disabled+0xdd/0xe0
kernel:   pqi_scsi_queue_command+0x183/0x310 [smartpqi]
kernel:  ...

Fixes: 283dcc1b142e ("scsi: smartpqi: add counter for parity write stream requests")
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Tested-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
---
 drivers/scsi/smartpqi/smartpqi_init.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index efc042071ec0..e8abfc56d0f0 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -6003,7 +6003,7 @@ static bool pqi_is_parity_write_stream(struct pqi_ctrl_info *ctrl_info,
 			pqi_stream_data->next_lba = rmd.first_block +
 				rmd.block_cnt;
 			pqi_stream_data->last_accessed = jiffies;
-			per_cpu_ptr(device->raid_io_stats, smp_processor_id())->write_stream_cnt++;
+				per_cpu_ptr(device->raid_io_stats, raw_smp_processor_id())->write_stream_cnt++;
 			return true;
 		}
 
@@ -6082,7 +6082,7 @@ static int pqi_scsi_queue_command(struct Scsi_Host *shost, struct scsi_cmnd *scm
 			rc = pqi_raid_bypass_submit_scsi_cmd(ctrl_info, device, scmd, queue_group);
 			if (rc == 0 || rc == SCSI_MLQUEUE_HOST_BUSY) {
 				raid_bypassed = true;
-				per_cpu_ptr(device->raid_io_stats, smp_processor_id())->raid_bypass_cnt++;
+				per_cpu_ptr(device->raid_io_stats, raw_smp_processor_id())->raid_bypass_cnt++;
 			}
 		}
 		if (!raid_bypassed)
-- 
2.49.0.391.g4bbb303af6

[PATCH 5/5] smartpqi: update driver version to 2.1.34-035

[Don Brace]

Update driver version to  2.1.34-035.

Reviewed-by: Gerry Morong <gerry.morong@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
---
 drivers/scsi/smartpqi/smartpqi_init.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index e8abfc56d0f0..a7ab87220c0c 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -32,11 +32,11 @@
 #define BUILD_TIMESTAMP
 #endif
 
-#define DRIVER_VERSION		"2.1.30-031"
+#define DRIVER_VERSION		"2.1.34-035"
 #define DRIVER_MAJOR		2
 #define DRIVER_MINOR		1
-#define DRIVER_RELEASE		30
-#define DRIVER_REVISION		31
+#define DRIVER_RELEASE		34
+#define DRIVER_REVISION		35
 
 #define DRIVER_NAME		"Microchip SmartPQI Driver (v" \
 				DRIVER_VERSION BUILD_TIMESTAMP ")"
-- 
2.49.0.391.g4bbb303af6

Re: [PATCH 0/5] smartpqi updates

[Martin K. Petersen]

Don,

> These patches are based on Martin Petersen's 6.16/scsi-queue tree
>   https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git
>   6.16/scsi-queue

Applied to 6.16/scsi-staging, thanks!

-- 
Martin K. Petersen

Re: [PATCH 0/5] smartpqi updates

[Martin K. Petersen]

On Wed, 23 Apr 2025 13:32:24 -0500, Don Brace wrote:

> These patches are based on Martin Petersen's 6.16/scsi-queue tree
>   https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git
>   6.16/scsi-queue
> 
> There are two main functional changes in this patch series:
> smartpqi-take-drives-offline-when-controller-is-offline
> smartpqi-fix-smp_processor_id-call-trace-for-preemptible-kernels
> 
> [...]

Applied to 6.16/scsi-queue, thanks!

[1/5] smartpqi: take drives offline when controller is offline
      https://git.kernel.org/mkp/scsi/c/32c79c268078
[2/5] smartpqi: add new pci ids
      https://git.kernel.org/mkp/scsi/c/01b8bdddcfab
[3/5] Enhance WWID Logging Logic.
      https://git.kernel.org/mkp/scsi/c/001164fc3082
[4/5] smartpqi: fix smp_processor_id() call trace for preemptible kernels
      https://git.kernel.org/mkp/scsi/c/42d033cf4b51
[5/5] smartpqi: update driver version to 2.1.34-035
      https://git.kernel.org/mkp/scsi/c/6e6d9e85bad2

-- 
Martin K. Petersen	Oracle Linux Engineering