[PATCH AUTOSEL 5.10 025/114] scsi: st: Tighten the page format heuristics with MODE SELECT

[PATCH AUTOSEL 5.10 025/114] scsi: st: Tighten the page format heuristics with MODE SELECT

[Sasha Levin]

From: Kai Mäkisara <Kai.Makisara@kolumbus.fi>

[ Upstream commit 8db816c6f176321e42254badd5c1a8df8bfcfdb4 ]

In the days when SCSI-2 was emerging, some drives did claim SCSI-2 but did
not correctly implement it. The st driver first tries MODE SELECT with the
page format bit set to set the block descriptor.  If not successful, the
non-page format is tried.

The test only tests the sense code and this triggers also from illegal
parameter in the parameter list. The test is limited to "old" devices and
made more strict to remove false alarms.

Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250311112516.5548-4-Kai.Makisara@kolumbus.fi
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/st.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 465fe83b49e98..47e59b74c09d2 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -3076,7 +3076,9 @@ static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned lon
 			   cmd_in == MTSETDRVBUFFER ||
 			   cmd_in == SET_DENS_AND_BLK) {
 			if (cmdstatp->sense_hdr.sense_key == ILLEGAL_REQUEST &&
-			    !(STp->use_pf & PF_TESTED)) {
+				cmdstatp->sense_hdr.asc == 0x24 &&
+				(STp->device)->scsi_level <= SCSI_2 &&
+				!(STp->use_pf & PF_TESTED)) {
 				/* Try the other possible state of Page Format if not
 				   already tried */
 				STp->use_pf = (STp->use_pf ^ USE_PF) | PF_TESTED;
-- 
2.39.5

[PATCH AUTOSEL 5.10 026/114] scsi: st: ERASE does not change tape location

[Sasha Levin]

From: Kai Mäkisara <Kai.Makisara@kolumbus.fi>

[ Upstream commit ad77cebf97bd42c93ab4e3bffd09f2b905c1959a ]

The SCSI ERASE command erases from the current position onwards.  Don't
clear the position variables.

Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250311112516.5548-3-Kai.Makisara@kolumbus.fi
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/st.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 47e59b74c09d2..747e69abfcfce 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -2889,7 +2889,6 @@ static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned lon
 			timeout = STp->long_timeout * 8;
 
 		DEBC_printk(STp, "Erasing tape.\n");
-		fileno = blkno = at_sm = 0;
 		break;
 	case MTSETBLK:		/* Set block length */
 	case MTSETDENSITY:	/* Set tape density */
-- 
2.39.5

[PATCH AUTOSEL 5.10 071/114] scsi: mpt3sas: Send a diag reset if target reset fails

[Sasha Levin]

From: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>

[ Upstream commit 5612d6d51ed2634a033c95de2edec7449409cbb9 ]

When an IOCTL times out and driver issues a target reset, if firmware
fails the task management elevate the recovery by issuing a diag reset to
controller.

Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Link: https://lore.kernel.org/r/1739410016-27503-5-git-send-email-shivasharan.srikanteshwara@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mpt3sas/mpt3sas_ctl.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index edd26a2570fa8..8ce77fbe4e3fc 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -676,6 +676,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
 	size_t data_in_sz = 0;
 	long ret;
 	u16 device_handle = MPT3SAS_INVALID_DEVICE_HANDLE;
+	int tm_ret;
 
 	issue_reset = 0;
 
@@ -1107,18 +1108,25 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
 			if (pcie_device && (!ioc->tm_custom_handling) &&
 			    (!(mpt3sas_scsih_is_pcie_scsi_device(
 			    pcie_device->device_info))))
-				mpt3sas_scsih_issue_locked_tm(ioc,
+				tm_ret = mpt3sas_scsih_issue_locked_tm(ioc,
 				  le16_to_cpu(mpi_request->FunctionDependent1),
 				  0, 0, 0,
 				  MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0,
 				  0, pcie_device->reset_timeout,
 			MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE);
 			else
-				mpt3sas_scsih_issue_locked_tm(ioc,
+				tm_ret = mpt3sas_scsih_issue_locked_tm(ioc,
 				  le16_to_cpu(mpi_request->FunctionDependent1),
 				  0, 0, 0,
 				  MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0,
 				  0, 30, MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET);
+
+			if (tm_ret != SUCCESS) {
+				ioc_info(ioc,
+					 "target reset failed, issue hard reset: handle (0x%04x)\n",
+					 le16_to_cpu(mpi_request->FunctionDependent1));
+				mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+			}
 		} else
 			mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 	}
-- 
2.39.5

[PATCH AUTOSEL 5.10 104/114] scsi: lpfc: Handle duplicate D_IDs in ndlp search-by D_ID routine

[Sasha Levin]

From: Justin Tee <justin.tee@broadcom.com>

[ Upstream commit 56c3d809b7b450379162d0b8a70bbe71ab8db706 ]

After a port swap between separate fabrics, there may be multiple nodes in
the vport's fc_nodes list with the same fabric well known address.
Duplication is temporary and eventually resolves itself after dev_loss_tmo
expires, but nameserver queries may still occur before dev_loss_tmo.  This
possibly results in returning stale fabric ndlp objects.  Fix by adding an
nlp_state check to ensure the ndlp search routine returns the correct newer
allocated ndlp fabric object.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250131000524.163662-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_hbadisc.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 3ff76ca147a5a..353c360b0c6ab 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -5407,6 +5407,7 @@ static struct lpfc_nodelist *
 __lpfc_findnode_did(struct lpfc_vport *vport, uint32_t did)
 {
 	struct lpfc_nodelist *ndlp;
+	struct lpfc_nodelist *np = NULL;
 	uint32_t data1;
 
 	list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
@@ -5421,14 +5422,20 @@ __lpfc_findnode_did(struct lpfc_vport *vport, uint32_t did)
 					 ndlp, ndlp->nlp_DID,
 					 ndlp->nlp_flag, data1, ndlp->nlp_rpi,
 					 ndlp->active_rrqs_xri_bitmap);
-			return ndlp;
+
+			/* Check for new or potentially stale node */
+			if (ndlp->nlp_state != NLP_STE_UNUSED_NODE)
+				return ndlp;
+			np = ndlp;
 		}
 	}
 
-	/* FIND node did <did> NOT FOUND */
-	lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
-			 "0932 FIND node did x%x NOT FOUND.\n", did);
-	return NULL;
+	if (!np)
+		/* FIND node did <did> NOT FOUND */
+		lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
+				 "0932 FIND node did x%x NOT FOUND.\n", did);
+
+	return np;
 }
 
 struct lpfc_nodelist *
-- 
2.39.5

[PATCH AUTOSEL 5.10 105/114] scsi: st: Restore some drive settings after reset

[Sasha Levin]

From: Kai Mäkisara <Kai.Makisara@kolumbus.fi>

[ Upstream commit 7081dc75df79696d8322d01821c28e53416c932c ]

Some of the allowed operations put the tape into a known position to
continue operation assuming only the tape position has changed.  But reset
sets partition, density and block size to drive default values. These
should be restored to the values before reset.

Normally the current block size and density are stored by the drive.  If
the settings have been changed, the changed values have to be saved by the
driver across reset.

Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250120194925.44432-2-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/st.c | 24 +++++++++++++++++++++---
 drivers/scsi/st.h |  2 ++
 2 files changed, 23 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 747e69abfcfce..23bbb062c2aaa 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -951,7 +951,6 @@ static void reset_state(struct scsi_tape *STp)
 		STp->partition = find_partition(STp);
 		if (STp->partition < 0)
 			STp->partition = 0;
-		STp->new_partition = STp->partition;
 	}
 }
 \f
@@ -2921,14 +2920,17 @@ static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned lon
 		if (cmd_in == MTSETDENSITY) {
 			(STp->buffer)->b_data[4] = arg;
 			STp->density_changed = 1;	/* At least we tried ;-) */
+			STp->changed_density = arg;
 		} else if (cmd_in == SET_DENS_AND_BLK)
 			(STp->buffer)->b_data[4] = arg >> 24;
 		else
 			(STp->buffer)->b_data[4] = STp->density;
 		if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) {
 			ltmp = arg & MT_ST_BLKSIZE_MASK;
-			if (cmd_in == MTSETBLK)
+			if (cmd_in == MTSETBLK) {
 				STp->blksize_changed = 1; /* At least we tried ;-) */
+				STp->changed_blksize = arg;
+			}
 		} else
 			ltmp = STp->block_size;
 		(STp->buffer)->b_data[9] = (ltmp >> 16);
@@ -3628,9 +3630,25 @@ static long st_ioctl_common(struct file *file, unsigned int cmd_in, void __user
 				retval = (-EIO);
 				goto out;
 			}
-			reset_state(STp);
+			reset_state(STp); /* Clears pos_unknown */
 			/* remove this when the midlevel properly clears was_reset */
 			STp->device->was_reset = 0;
+
+			/* Fix the device settings after reset, ignore errors */
+			if (mtc.mt_op == MTREW || mtc.mt_op == MTSEEK ||
+				mtc.mt_op == MTEOM) {
+				if (STp->can_partitions) {
+					/* STp->new_partition contains the
+					 *  latest partition set
+					 */
+					STp->partition = 0;
+					switch_partition(STp);
+				}
+				if (STp->density_changed)
+					st_int_ioctl(STp, MTSETDENSITY, STp->changed_density);
+				if (STp->blksize_changed)
+					st_int_ioctl(STp, MTSETBLK, STp->changed_blksize);
+			}
 		}
 
 		if (mtc.mt_op != MTNOP && mtc.mt_op != MTSETBLK &&
diff --git a/drivers/scsi/st.h b/drivers/scsi/st.h
index 95d2e7a7988de..c9947abb0a451 100644
--- a/drivers/scsi/st.h
+++ b/drivers/scsi/st.h
@@ -168,12 +168,14 @@ struct scsi_tape {
 	unsigned char compression_changed;
 	unsigned char drv_buffer;
 	unsigned char density;
+	unsigned char changed_density;
 	unsigned char door_locked;
 	unsigned char autorew_dev;   /* auto-rewind device */
 	unsigned char rew_at_close;  /* rewind necessary at close */
 	unsigned char inited;
 	unsigned char cleaning_req;  /* cleaning requested? */
 	int block_size;
+	int changed_blksize;
 	int min_block;
 	int max_block;
 	int recover_count;     /* From tape opening */
-- 
2.39.5