From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org, Bart Van Assche <bvanassche@acm.org>,
"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>,
Peter Wang <peter.wang@mediatek.com>,
Avri Altman <avri.altman@sandisk.com>,
Bean Huo <beanhuo@micron.com>
Subject: [PATCH v2 14/30] ufs: core: Rework ufshcd_mcq_compl_pending_transfer()
Date: Mon, 11 Aug 2025 10:34:26 -0700 [thread overview]
Message-ID: <20250811173634.514041-15-bvanassche@acm.org> (raw)
In-Reply-To: <20250811173634.514041-1-bvanassche@acm.org>
Replace a tag loop with blk_mq_tagset_busy_iter(). This patch prepares
for removing the hba->lrb[] array.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
drivers/ufs/core/ufshcd.c | 80 ++++++++++++++++++++++-----------------
1 file changed, 46 insertions(+), 34 deletions(-)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 923a19ff668a..e506843d4f33 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -5711,6 +5711,48 @@ static int ufshcd_poll(struct Scsi_Host *shost, unsigned int queue_num)
return completed_reqs != 0;
}
+static bool ufshcd_mcq_force_compl_one(struct request *rq, void *priv)
+{
+ struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq);
+ struct scsi_device *sdev = rq->q->queuedata;
+ struct Scsi_Host *shost = sdev->host;
+ struct ufs_hba *hba = shost_priv(shost);
+ struct ufshcd_lrb *lrbp = &hba->lrb[rq->tag];
+ struct ufs_hw_queue *hwq = ufshcd_mcq_req_to_hwq(hba, rq);
+
+ if (!hwq)
+ return true;
+
+ ufshcd_mcq_compl_all_cqes_lock(hba, hwq);
+
+ /*
+ * For those cmds of which the cqes are not present in the cq, complete
+ * them explicitly.
+ */
+ scoped_guard(spinlock_irqsave, &hwq->cq_lock) {
+ if (cmd && !test_bit(SCMD_STATE_COMPLETE, &cmd->state)) {
+ set_host_byte(cmd, DID_REQUEUE);
+ ufshcd_release_scsi_cmd(hba, lrbp);
+ scsi_done(cmd);
+ }
+ }
+
+ return true;
+}
+
+static bool ufshcd_mcq_compl_one(struct request *rq, void *priv)
+{
+ struct scsi_device *sdev = rq->q->queuedata;
+ struct Scsi_Host *shost = sdev->host;
+ struct ufs_hba *hba = shost_priv(shost);
+ struct ufs_hw_queue *hwq = ufshcd_mcq_req_to_hwq(hba, rq);
+
+ if (hwq)
+ ufshcd_mcq_poll_cqe_lock(hba, hwq);
+
+ return true;
+}
+
/**
* ufshcd_mcq_compl_pending_transfer - MCQ mode function. It is
* invoked from the error handler context or ufshcd_host_reset_and_restore()
@@ -5725,40 +5767,10 @@ static int ufshcd_poll(struct Scsi_Host *shost, unsigned int queue_num)
static void ufshcd_mcq_compl_pending_transfer(struct ufs_hba *hba,
bool force_compl)
{
- struct ufs_hw_queue *hwq;
- struct ufshcd_lrb *lrbp;
- struct scsi_cmnd *cmd;
- unsigned long flags;
- int tag;
-
- for (tag = 0; tag < hba->nutrs; tag++) {
- lrbp = &hba->lrb[tag];
- cmd = lrbp->cmd;
- if (!ufshcd_cmd_inflight(cmd) ||
- test_bit(SCMD_STATE_COMPLETE, &cmd->state))
- continue;
-
- hwq = ufshcd_mcq_req_to_hwq(hba, scsi_cmd_to_rq(cmd));
- if (!hwq)
- continue;
-
- if (force_compl) {
- ufshcd_mcq_compl_all_cqes_lock(hba, hwq);
- /*
- * For those cmds of which the cqes are not present
- * in the cq, complete them explicitly.
- */
- spin_lock_irqsave(&hwq->cq_lock, flags);
- if (cmd && !test_bit(SCMD_STATE_COMPLETE, &cmd->state)) {
- set_host_byte(cmd, DID_REQUEUE);
- ufshcd_release_scsi_cmd(hba, lrbp);
- scsi_done(cmd);
- }
- spin_unlock_irqrestore(&hwq->cq_lock, flags);
- } else {
- ufshcd_mcq_poll_cqe_lock(hba, hwq);
- }
- }
+ blk_mq_tagset_busy_iter(&hba->host->tag_set,
+ force_compl ? ufshcd_mcq_force_compl_one :
+ ufshcd_mcq_compl_one,
+ NULL);
}
/**
next prev parent reply other threads:[~2025-08-11 17:39 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-11 17:34 [PATCH v2 00/30] Optimize the hot path in the UFS driver Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 01/30] scsi: core: Support allocating reserved commands Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 02/30] scsi: core: Support allocating a pseudo SCSI device Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 03/30] scsi: core: Do not allocate a budget token for reserved commands Bart Van Assche
2025-08-18 12:23 ` Hannes Reinecke
2025-08-18 13:16 ` John Garry
2025-08-18 13:21 ` Hannes Reinecke
2025-08-18 15:58 ` Bart Van Assche
2025-08-19 6:34 ` Hannes Reinecke
2025-08-19 19:49 ` Bart Van Assche
2025-08-20 6:54 ` Hannes Reinecke
2025-08-20 17:53 ` Bart Van Assche
2025-08-21 6:42 ` Hannes Reinecke
2025-08-21 15:54 ` Bart Van Assche
2025-08-18 16:01 ` Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 04/30] scsi: core: Add scsi_{get,put}_internal_cmd() helpers Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 05/30] scsi: core: Introduce scsi_host_update_can_queue() Bart Van Assche
2025-08-13 9:47 ` John Garry
2025-08-13 15:23 ` Bart Van Assche
2025-08-14 8:24 ` John Garry
2025-08-14 16:17 ` Bart Van Assche
2025-08-14 17:03 ` John Garry
2025-08-15 17:13 ` Bart Van Assche
2025-08-18 13:29 ` Hannes Reinecke
2025-08-18 16:05 ` Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 06/30] scsi_debug: Set .alloc_pseudo_sdev Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 07/30] ufs: core: Move an assignment Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 08/30] ufs: core: Change the type of one ufshcd_add_cmd_upiu_trace() argument Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 09/30] ufs: core: Only call ufshcd_add_command_trace() for SCSI commands Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 10/30] ufs: core: Change the type of one ufshcd_add_command_trace() argument Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 11/30] ufs: core: Change the type of one ufshcd_send_command() argument Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 12/30] ufs: core: Only call ufshcd_should_inform_monitor() for SCSI commands Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 13/30] ufs: core: Change the monitor function argument types Bart Van Assche
2025-08-11 17:34 ` Bart Van Assche [this message]
2025-08-11 17:34 ` [PATCH v2 15/30] ufs: core: Rework ufshcd_eh_device_reset_handler() Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 16/30] ufs: core: Cache the DMA buffer sizes Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 17/30] ufs: core: Add an argument to ufshcd_mcq_decide_queue_depth() Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 18/30] ufs: core: Add an argument to ufshcd_alloc_mcq() Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 19/30] ufs: core: Call ufshcd_mcq_init() once Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 20/30] ufs: core: Allocate the SCSI host earlier Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 21/30] ufs: core: Make ufshcd_mcq_init() independent of hba->nutrs Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 22/30] ufs: core: Call ufshcd_init_lrb() later Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 23/30] ufs: core: Use hba->reserved_slot Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 24/30] ufs: core: Make the reserved slot a reserved request Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 25/30] ufs: core: Do not clear driver-private command data Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 26/30] ufs: core: Optimize the hot path Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 27/30] ufs: core: Remove the ufshcd_lrb task_tag member Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 28/30] ufs: core: Initialize the 'hwq' variable earlier Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 29/30] ufs: core: Make blk_mq_tagset_busy_iter() skip reserved requests Bart Van Assche
2025-08-11 17:34 ` [PATCH v2 30/30] ufs: core: Switch to scsi_get_internal_cmd() Bart Van Assche
2025-08-13 9:49 ` [PATCH v2 00/30] Optimize the hot path in the UFS driver John Garry
2025-08-13 15:06 ` Bart Van Assche
2025-08-14 8:40 ` John Garry
2025-08-14 16:51 ` Bart Van Assche
2025-08-15 7:50 ` John Garry
2025-08-15 17:30 ` Bart Van Assche
2025-08-16 8:37 ` John Garry
2025-08-18 16:25 ` Bart Van Assche
2025-08-21 18:20 ` Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250811173634.514041-15-bvanassche@acm.org \
--to=bvanassche@acm.org \
--cc=James.Bottomley@HansenPartnership.com \
--cc=avri.altman@sandisk.com \
--cc=beanhuo@micron.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=peter.wang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).