[PATCH v2 6/7] scsi: target: Add WRITE_ATOMIC_16 support to RSOC

[John Garry <john.g.garry@oracle.com>]

From: Mike Christie <michael.christie@oracle.com>

This has us report if the device supports WRITE_ATOMIC_16 in the
REPORT_SUPPORTED_OPERATION_CODES command.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
---
 drivers/target/target_core_spc.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/target/target_core_spc.c b/drivers/target/target_core_spc.c
index ddf8104645d1e..fe2b888bcb435 100644
--- a/drivers/target/target_core_spc.c
+++ b/drivers/target/target_core_spc.c
@@ -1470,6 +1470,24 @@ static const struct target_opcode_descriptor tcm_opcode_write_same32 = {
 	.update_usage_bits = set_dpofua_usage_bits32,
 };
 
+static bool tcm_is_atomic_enabled(const struct target_opcode_descriptor *descr,
+				  struct se_cmd *cmd)
+{
+	return cmd->se_dev->dev_attrib.atomic_max_len;
+}
+
+static struct target_opcode_descriptor tcm_opcode_write_atomic16 = {
+	.support = SCSI_SUPPORT_FULL,
+	.opcode = WRITE_ATOMIC_16,
+	.cdb_size = 16,
+	.usage_bits = {WRITE_ATOMIC_16, 0xf8, 0xff, 0xff,
+		       0xff, 0xff, 0xff, 0xff,
+		       0xff, 0xff, 0xff, 0xff,
+		       0xff, 0xff, SCSI_GROUP_NUMBER_MASK, SCSI_CONTROL_MASK},
+	.enabled = tcm_is_atomic_enabled,
+	.update_usage_bits = set_dpofua_usage_bits,
+};
+
 static bool tcm_is_caw_enabled(const struct target_opcode_descriptor *descr,
 			       struct se_cmd *cmd)
 {
@@ -2026,6 +2044,7 @@ static const struct target_opcode_descriptor *tcm_supported_opcodes[] = {
 	&tcm_opcode_write16,
 	&tcm_opcode_write_verify16,
 	&tcm_opcode_write_same32,
+	&tcm_opcode_write_atomic16,
 	&tcm_opcode_compare_write,
 	&tcm_opcode_read_capacity,
 	&tcm_opcode_read_capacity16,
-- 
2.43.5