From: Sasha Levin <sashal@kernel.org>
To: patches@lists.linux.dev, stable@vger.kernel.org
Cc: Bart Van Assche <bvanassche@acm.org>,
Avri Altman <avri.altman@sandisk.com>,
Nitin Rawat <quic_nitirawa@quicinc.com>,
Peter Wang <peter.wang@mediatek.com>,
Manivannan Sadhasivam <mani@kernel.org>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
Sasha Levin <sashal@kernel.org>,
matthias.bgg@gmail.com, angelogioacchino.delregno@collabora.com,
beanhuo@micron.com, alexandre.f.demers@gmail.com,
adrian.hunter@intel.com, quic_mapa@quicinc.com,
linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Subject: [PATCH AUTOSEL 6.17-6.6] scsi: ufs: core: Disable timestamp functionality if not supported
Date: Sat, 25 Oct 2025 11:58:34 -0400 [thread overview]
Message-ID: <20251025160905.3857885-283-sashal@kernel.org> (raw)
In-Reply-To: <20251025160905.3857885-1-sashal@kernel.org>
From: Bart Van Assche <bvanassche@acm.org>
[ Upstream commit fb1f4568346153d2f80fdb4ffcfa0cf4fb257d3c ]
Some Kioxia UFS 4 devices do not support the qTimestamp attribute. Set
the UFS_DEVICE_QUIRK_NO_TIMESTAMP_SUPPORT for these devices such that no
error messages appear in the kernel log about failures to set the
qTimestamp attribute.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Tested-by: Nitin Rawat <quic_nitirawa@quicinc.com> # on SM8650-QRD
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Message-ID: <20250909190614.3531435-1-bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
LLM Generated explanations, may be completely bogus:
YES. The change adds a targeted quirk for the Kioxia `THGJFJT1E45BATP`
device (`drivers/ufs/core/ufshcd.c:316`) that prevents the core driver
from issuing the qTimestamp write when the device advertises that the
attribute is unsupported (`drivers/ufs/core/ufshcd.c:8799`). Without it,
every link bring-up or reset hits `ufshcd_set_timestamp_attr()` and
emits a `dev_err` because the write reliably fails, so users see
recurring kernel log noise on affected hardware. Introducing
`UFS_DEVICE_QUIRK_NO_TIMESTAMP_SUPPORT` (`include/ufs/ufs_quirks.h:117`)
is mechanically simple, does not alter behaviour for other devices, and
cleanly gates the existing code path via the existing quirk plumbing,
making the risk of regression very low. Because it fixes a user-visible
malfunction (persistent error messages) on shipping UFS 4 hardware and
is tightly scoped with no architectural fallout, it fits stable backport
criteria well. A natural follow-up is to validate on the affected
hardware that the spurious log entries disappear after backporting.
drivers/ufs/core/ufshcd.c | 6 +++++-
include/ufs/ufs_quirks.h | 3 +++
2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 78d3f0ee16d84..1907c0f6eda0e 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -316,6 +316,9 @@ static const struct ufs_dev_quirk ufs_fixups[] = {
{ .wmanufacturerid = UFS_VENDOR_TOSHIBA,
.model = "THGLF2G9D8KBADG",
.quirk = UFS_DEVICE_QUIRK_PA_TACTIVATE },
+ { .wmanufacturerid = UFS_VENDOR_TOSHIBA,
+ .model = "THGJFJT1E45BATP",
+ .quirk = UFS_DEVICE_QUIRK_NO_TIMESTAMP_SUPPORT },
{}
};
@@ -8794,7 +8797,8 @@ static void ufshcd_set_timestamp_attr(struct ufs_hba *hba)
struct ufs_dev_info *dev_info = &hba->dev_info;
struct utp_upiu_query_v4_0 *upiu_data;
- if (dev_info->wspecversion < 0x400)
+ if (dev_info->wspecversion < 0x400 ||
+ hba->dev_quirks & UFS_DEVICE_QUIRK_NO_TIMESTAMP_SUPPORT)
return;
ufshcd_dev_man_lock(hba);
diff --git a/include/ufs/ufs_quirks.h b/include/ufs/ufs_quirks.h
index f52de5ed1b3b6..83563247c36cb 100644
--- a/include/ufs/ufs_quirks.h
+++ b/include/ufs/ufs_quirks.h
@@ -113,4 +113,7 @@ struct ufs_dev_quirk {
*/
#define UFS_DEVICE_QUIRK_PA_HIBER8TIME (1 << 12)
+/* Some UFS 4 devices do not support the qTimestamp attribute */
+#define UFS_DEVICE_QUIRK_NO_TIMESTAMP_SUPPORT (1 << 13)
+
#endif /* UFS_QUIRKS_H_ */
--
2.51.0
next prev parent reply other threads:[~2025-10-25 16:22 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20251025160905.3857885-1-sashal@kernel.org>
2025-10-25 15:54 ` [PATCH AUTOSEL 6.17-5.4] scsi: lpfc: Define size of debugfs entry for xri rebalancing Sasha Levin
2025-10-25 15:54 ` [PATCH AUTOSEL 6.17] scsi: ufs: ufs-qcom: Disable lane clocks during phy hibern8 Sasha Levin
2025-10-25 15:54 ` [PATCH AUTOSEL 6.17-6.12] PCI/ERR: Update device error_state already after reset Sasha Levin
2025-10-25 15:55 ` [PATCH AUTOSEL 6.17] scsi: ufs: core: Change MCQ interrupt enable flow Sasha Levin
2025-10-25 15:55 ` [PATCH AUTOSEL 6.17-5.4] scsi: lpfc: Check return status of lpfc_reset_flush_io_context during TGT_RESET Sasha Levin
2025-10-25 15:55 ` [PATCH AUTOSEL 6.17-6.1] scsi: ufs: host: mediatek: Fix invalid access in vccqx handling Sasha Levin
2025-10-25 15:56 ` [PATCH AUTOSEL 6.17-6.1] scsi: ufs: host: mediatek: Change reset sequence for improved stability Sasha Levin
2025-10-25 15:56 ` [PATCH AUTOSEL 6.17-5.15] scsi: mpi3mr: Fix controller init failure on fault during queue creation Sasha Levin
2025-10-25 15:56 ` [PATCH AUTOSEL 6.17-6.6] scsi: ufs: host: mediatek: Disable auto-hibern8 during power mode changes Sasha Levin
2025-10-25 15:56 ` [PATCH AUTOSEL 6.17-6.12] scsi: lpfc: Clean up allocated queues when queue setup mbox commands fail Sasha Levin
2025-10-25 15:56 ` [PATCH AUTOSEL 6.17] scsi: ufs: ufs-qcom: Align programming sequence of Shared ICE for UFS controller v5 Sasha Levin
2025-10-25 15:57 ` [PATCH AUTOSEL 6.17-6.12] scsi: ufs: host: mediatek: Fix PWM mode switch issue Sasha Levin
2025-10-25 15:57 ` [PATCH AUTOSEL 6.17-6.6] scsi: ufs: host: mediatek: Enhance recovery on hibernation exit failure Sasha Levin
2025-10-25 15:57 ` [PATCH AUTOSEL 6.17-5.15] scsi: libfc: Fix potential buffer overflow in fc_ct_ms_fill() Sasha Levin
2025-10-25 15:57 ` [PATCH AUTOSEL 6.17-6.12] scsi: ufs: exynos: fsd: Gate ref_clk and put UFS device in reset on suspend Sasha Levin
2025-10-25 15:58 ` [PATCH AUTOSEL 6.17-5.10] scsi: pm80xx: Fix race condition caused by static variables Sasha Levin
2025-10-25 15:58 ` [PATCH AUTOSEL 6.17] scsi: ufs: host: mediatek: Fix adapt issue after PA_Init Sasha Levin
2025-10-25 15:58 ` Sasha Levin [this message]
2025-10-25 15:58 ` [PATCH AUTOSEL 6.17-6.1] scsi: ufs: host: mediatek: Assign power mode userdata before FASTAUTO mode change Sasha Levin
2025-10-25 15:59 ` [PATCH AUTOSEL 6.17-6.12] scsi: mpi3mr: Fix I/O failures during controller reset Sasha Levin
2025-10-25 16:00 ` [PATCH AUTOSEL 6.17] scsi: mpi3mr: Fix device loss during enclosure reboot due to zero link speed Sasha Levin
2025-10-25 16:00 ` [PATCH AUTOSEL 6.17-6.12] scsi: lpfc: Ensure PLOGI_ACC is sent prior to PRLI in Point to Point topology Sasha Levin
2025-10-25 16:00 ` [PATCH AUTOSEL 6.17-6.6] scsi: ufs: host: mediatek: Fix auto-hibern8 timer configuration Sasha Levin
2025-10-25 16:00 ` [PATCH AUTOSEL 6.17-6.12] scsi: ufs: host: mediatek: Fix unbalanced IRQ enable issue Sasha Levin
2025-10-25 16:00 ` [PATCH AUTOSEL 6.17-6.1] scsi: ufs: host: mediatek: Enhance recovery on resume failure Sasha Levin
2025-10-25 16:00 ` [PATCH AUTOSEL 6.17-6.1] scsi: mpt3sas: Add support for 22.5 Gbps SAS link rate Sasha Levin
2025-10-25 16:00 ` [PATCH AUTOSEL 6.17-6.12] scsi: lpfc: Decrement ndlp kref after FDISC retries exhausted Sasha Levin
2025-10-25 16:01 ` [PATCH AUTOSEL 6.17-5.4] scsi: pm8001: Use int instead of u32 to store error codes Sasha Levin
2025-10-25 16:01 ` [PATCH AUTOSEL 6.17-6.12] scsi: ufs: host: mediatek: Correct system PM flow Sasha Levin
2025-10-25 16:01 ` [PATCH AUTOSEL 6.17-5.15] scsi: lpfc: Remove ndlp kref decrement clause for F_Port_Ctrl in lpfc_cleanup Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251025160905.3857885-283-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=adrian.hunter@intel.com \
--cc=alexandre.f.demers@gmail.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=avri.altman@sandisk.com \
--cc=beanhuo@micron.com \
--cc=bvanassche@acm.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-scsi@vger.kernel.org \
--cc=mani@kernel.org \
--cc=martin.petersen@oracle.com \
--cc=matthias.bgg@gmail.com \
--cc=patches@lists.linux.dev \
--cc=peter.wang@mediatek.com \
--cc=quic_mapa@quicinc.com \
--cc=quic_nitirawa@quicinc.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox